AUTHOR RATE
Mitutoyo-Optional Accessories for Surftest SJ-210/310

Attachment for interrupted surface measurement No.178-034 Best suited for measurement of the flat surface of a workpiece that has partial indentations and steps and that is hard to set the drive unit. Combination use with the magnet type specimen holder (Option: No.12AAA910) further improves the ease of operation. Attachment for measuring inside bores and holes […]

AUTHOR RATE
Mitutoyo-Optional Accessories for Surftest SJ-210/310

Detector Standard detectors Code No. Measuring force Stylus Remarks 178-296 0.75mN 2µmR /60˚ Dedicated to the standard/retractable drive unit 178–390 4 mN 5µmR /90˚ 178–387 0.75mN 2µmR /60˚ Dedicated to the transverse tracing drive unit 178–386 4 mN 5µmR /90˚ 178–391 4 mN 10µmR /90˚ Dedicated to the standard/ retractable drive unit *Tip radius /Tip angles Small hole detectors Code […]

AUTHOR RATE
Mitutoyo-SERIES 178 – On-site Surface Roughness Tester-Surftest SJ-310

SPECIFICATIONS *1: Calculation is available only when selecting the VDA, ANSI, or JIS 1982 standard. *2: Calculation is available only when selecting the ISO 1997 standard. *3: Calculation is available only when selecting the JIS 2001 standard. *4: Calculation is available only when selecting the ANSI standard. *5: Not available when selecting the JIS 1982 […]

AUTHOR RATE
Mitutoyo-SERIES 178 – On-site Surface Roughness Tester-Surftest SJ-210

*1: Calculation is available only when selecting the VDA, ANSI, or JIS 1982 standard. *2: Calculation is available only when selecting the ISO 1997 standard. *3: Calculation is available only when selecting the JIS 2001 standard. *4: Calculation is available only when selecting the ANSI standard. *5: Not available when selecting the JIS1982 standard *6: […]

AUTHOR RATE
Mitutoyo-Dial Snap Gage

Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes. Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils. Anvil retracting stroke: 2mm/.080” Anvil positioning range: 25mm/ 1” Adjustment nut: adjusts the measuring range. Clamp: adjustment nut Flatness of measuring face: 1μm Stability of indication: 2μm or less (stability of […]

AUTHOR RATE
Mitutoyo-SERIES 547, 7-Thickness Gages

Dial thickness gages can quickly measure the thickness of thin products such as paper and felt. Contact point and anvil are both made of ceramic: rust-free (547-401 is excluded.) Integrated molding of the bezel and crystal ensures protection against water and oil penetration via the front face. Standard Type High Accuracy Type Standard Type Lightweight […]

AUTHOR RATE
Mitutoyo-Optional Accessories for Dial Test Indicators-Styli, Stems and Holders

Styli (for Metric Models Only*) * Except for universal type dial test indicator (513-304G). Stylus length affects the scale factor of an indicator. The styli provided as standard give a scale factor of unity. ø0.5mm ball-point 190547 (L=14.7mm) 190549 (L=20.9mm) 190654 (L=22.3mm) 190656 (L=44.5mm) ø0.7mm ball-point 190548 (L=14.7mm) 190550 (L=20.9mm) 190653 (L=22.3mm) 190655 (L=44.5mm) ø1mm […]

AUTHOR RATE
Mitutoyo-SERIES 513 – Horizontal (20° Tilted Face), Vertical, and Parallel Types-Dial Test Indicator

Specially designed for easy viewing of dial. The dial face obliquely faces upward, allowing users to read the graduations from the user’s side. It is convenient when probing on the side of a large workpiece and the workbench is high. Using the universal holder allows easy hole centering. The dial face always faces upward when […]

AUTHOR RATE
Mitutoyo-SERIES 513 – Lever-Type Dial Indicators-Dial Test Indicators

Designed to probe surfaces that cannot be reached with a normal dial gauge. Useful both for alignment and for measurement purposes. Mitutoyo’s proprietary new design permits smooth pointer operation. Strong frame provides excellent rigidity and durability. Non-magnetic pointer and contact point permit reliable operation even in magnetic environments. Clear and concise wide dial face allows […]

AUTHOR RATE
Mitutoyo-SERIES 1-Back Plunger Type Dial Indicator

Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in situations where standard dial gauges are difficult to read. Model 1960T and 1961T, which uses Mitutoyo’s proprietary shock-proofing mechanism, has excellent durability and shock resistance. DIMENSIONS Order No. A B C E F G […]

AUTHOR RATE
Mitutoyo-SERIES 2-Back Plunger Type Dial Indicator

Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in small spaces where the graduations of standard dial gauges are difficult to see. Models 2960T, 2961T, 2990T-10 and 2991T-10, which use Mitutoyo’s proprietary shock-proofing mechanism, have excellent durability and shock resistance. Model 2990T-10 provides […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Special Dial Indicators

Peak hold type dial gauge A mechanism holds the pointer and the spindle at the position of maximum depression and hence displays the maximum value. * Clearance of peak hold: push the nut in the direction of the arrow indicated in the dimensional drawing below. DIMENSIONS SPECIFICATIONS Metric Order No. Graduation Range (range/rev) Accuracy Repeat- […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Special Dial Indicators-Dial Indicators

Adjustable hand dial gauge The hand position can be adjusted independently of the position of the spindle by rotating the top knob. DIMENSIONS * Contact points, other than dedicated types, cannot be installed. * The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the […]

AUTHOR RATE
Mitutoyo-SERIES 3, 4 – Long StrokeType, Large Diameter-Dial Indicators

Dial indicators with a large-diameter dial face for easy reading. Models with longer measuring ranges are also available. All types are supplied with limit markers and a bezel clamp as standard. Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use. The bezel clamp and lifting lever (optional)*1 […]

AUTHOR RATE
Mitutoyo-SERIES 1 – Compact One Revolution Type for Error-free Reading-Dial Indicators

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. The dead zone in red indicates “accuracy not guaranteed” . One revolution type Back plunger dial gages are also […]

AUTHOR RATE
Mitutoyo-SERIES 1 – Compact Type, Small Diameter-Dial Indicators

Compact dial indicators with bezel diameters of ø40mm for restricted-space applications in gaging jigs. SPECIFICATIONS Metric * Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed. Inch * Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed. […]

AUTHOR RATE
Mitutoyo-SERIES 1 – Compact Type, Small Diameter-Dial Indicators

Compact dial indicators with bezel diameters of ø31 or ø36mm for restricted-space applications in gaging jigs. DIMENSIONS Order No. A B C D E F G H I 1911T-10 15.5 42 31 12.9 19.2 15 11.5 30 5.9 1913T-10 15.5 39.5 31 12.9 19.2 15 9 30 5.9 1003T 18 40.3 36 13 15 9.5 […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Long Stroke Type-Dial Indicators

Long stroke dial indicators with a ø57mm outer frame. All the models are equipped with limit markers and a bezel clamp as standard. An O-ring is employed to ensure air-tightness between the outer frame and the crystal case to prevent water or oil penetration. Both the stem and the spindle are made of high-strength quench-hardened […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard One Revolution Type for Error-free Reading, Lightweight Type-Dial Indicators

Excellent water- and drip-proof characteristics (IP43). Smooth movement thanks to the improved design of bush and stem. Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant. Lightweight type (70g). DIMENSIONS * When installing an optional back (refer to page F-55 for details) please separately prepare 4 fixing […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard One Revolution Type for Error-free Reading, Waterproof Type-Dial Indicators

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. The dead zone in red indicates “accuracy not guaranteed”. One revolution type Back plunger dial gages are also available. […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard One Revolution Type for Error-free Reading-Dial Indicators

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. The dead zone in red indicates “accuracy not guaranteed”. DIMENSIONS Note 1: Dimensions of the inch (ANSI/AGD Type) dial […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Waterproof Type, 0.01mm & 0.001mm Graduation-Dial Indicators

Waterproof type dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard. The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools. The stem and spindle are made of […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard Type, 0.001mm & 0.005mm Graduation-Dial Indicators

Standard 0.001mm and 0.005mm graduation dial indicators having a bezel with an outside diameter of ø57mm. All types come with limit markers and a bezel clamp. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secure adhesion […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard Type, 0.01mm Graduation-Dial Indicators

Standard 0.01mm graduation dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard. The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secure adhesion […]

AUTHOR RATE
Mitutoyo-SERIES 543 – with Back-light LCD Screen-ABSOLUTE Digimatic Indicator ID-F

GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red. An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. With Mitutoyo’s ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not […]

AUTHOR RATE
Mitutoyo-SERIES 543 – High Accuracy and High Functionality Type-Digimatic Indicator ID-H

This new-generation digital indicator offers the excellent accuracy and functionality expected from the top class of indicator. Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution, remote control functionality via a handheld controller (or an RS-232C interface) and easy runout measurements with the well-established analog bar display. Functionality meets the needs of diverse […]

AUTHOR RATE
Mitutoyo-SERIES 575 – Slim and Economical Design-ABSOLUTE Digimatic Indicator ID-U

General purpose indicator with the measuring range of 25.4mm/ 1”. Cost-effective and user-friendly type which is equipped with the basic functions necessary. The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.  Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18. […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Signal Output Function Type-ABSOLUTE Digimatic Indicator ID-C

Enables a tolerance judgment to be output to external equipment for a measurement result against user-defined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts. Output is enabled by directly connecting to external devices (sequencers, etc., for which a logical invert is available if required). The measurement and judgment results are displayed on the LCD. The […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Calculation Type-ABSOLUTE Digimatic Indicator ID-C

Calculation function operates on spindle displacement. Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the conversion tables previously needed for those applications where fixtures are typically used. Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value. Simple operation of many functions with five buttons and […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Bore Gage Type-ABSOLUTE Digimatic Indicator ID-C

Dedicated to inside measurement with minimum-value Hold and tolerance judgement functions. Measurement data memory function (9 measurement results can be stored) Simple operation of many functions with five buttons and status icons. Wide LCD and new analog bar graph are now standard on all models. Sampling is performed fifty times per second for accurate detection of maximum and […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Peak-Value Hold Type-ABSOLUTE Digimatic Indicator ID-C

Run-out/MAX/MIN Hold function enables GO/±NG judgement for peak or difference values. Simple operation of many functions with five buttons and status icons. Wide LCD and new analog bar graph are now standard on all models. Sampling is performed fifty times per second for accurate detection of maximum and minimum values. SPECIFICATIONS Metric Order No.(w/lug, flat-back) Range Resolution Accuracy*1 Hysteresis*1 […]

AUTHOR RATE
Mitutoyo-SERIES 543 – with Dust/ Water Protection Conforming to IP66-ABSOLUTE Digimatic Indicator ID-N/B

Our unique ABS sensor restores the last origin position automatically when the indicator is turned on. The chance of overspeed errors has been eliminated thanks to the ABS sensor. Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting fluid or coolant. Slim body design […]

AUTHOR RATE
Mitutoyo-SERIES 543 — Standard Type-ABLOLUTE Digimatic Indicator ID-CX

The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18. Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors. Tolerance-judging measurement is available by setting upper and lower […]

AUTHOR RATE
Mitutoyo-SERIES 543-ABSOLUTE Solar-Powered Digimatic Indicator ID-SS

Solar powered An environmentally friendly measuring instrument that does not require batteries, eliminating the hassle and cost of battery replacement. Can operate under minimum light conditions of 40 lux—lower than the level in a warehouse. Built-in recharger The large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under light conditions below the […]

AUTHOR RATE
Mitutoyo-SERIES 960-Precision Levels

High-precision longitudinal and transverse vials make it possible to check or level surfaces. SPECIFICATIONS Order No. Sensitivity Dimensions (W x D x H) 960-603 0.02mm/m 200 x 44 x 38.2mm 960-703 0.02mm/m 200 x 44 x 200mm Technical Data Accuracy of graduations: ±0.7 DIV (960-603), ±0.3 DIV (960-703)

AUTHOR RATE
Mitutoyo-SERIES 187-Digital Universal Protractor

Data output function makes it easy to gather statistical data. Can be attached to height gages using a gage holder (950750, metric) Setting preset value. Removable blade. SPECIFICATIONS Order No. Blade length Remarks (standard accessory) 187-501 150mm Height gage holder (950750) 187-502 300mm Height gage holder (950750) 187-551 6” Height gage holder (950749) 187-552 12” Height gage […]

AUTHOR RATE
Mitutoyo-SERIES 188-Thread Pitch Gages

Thread pitch is stamped on each gage. Metric, Unified, and Whitworth screw pitch gages.   SPECIFICATIONS Metric Screw Pitch Gages Order No. Range Composition of leaves 188-130 0.35 – 6mm 22 leaves: 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm and 60° angle […]

AUTHOR RATE
Mitutoyo-SERIES 186-Radius Gages

Radius size is stamped on each gage leaf. Each leaf comprises an internal and an external radius gage of the same size. With locking clamp. SPECIFICATIONS Metric Order No. Range Composition of leaves Remarks 186-110 0.4 – 6mm 18 leaves: 0.4, 0.8, 1, 1.2, 1.5, 1.6mm, 1.75 – 3mm by 0.25mm, 3.5 – 6mm by 0.5mm […]

AUTHOR RATE
Mitutoyo-SERIES 184-Thickness Gages

Metric thickness gages are available with tapered leaves. Each leaf is marked with its Each leaf is detachable if SPECIFICATIONS Metric Order No. Range Composition of leaves Remarks 184-313S 0.05 – 1mm 28 leaves: 0.05 – 0.15mm by 0.01mm, 0.2 – 1mm by 0.05mm — 184-303S 28 leaves: 0.05 – 0.15mm by 0.01mm, 0.2 – […]

AUTHOR RATE
Mitutoyo-SERIES 182-Steel Rules

Clear graduations on satin-chrome finish. Stainless tempered. SPECIFICATIONS Metric Wide Rigid Rules Order No. Graduations Range Width 182-111   1mm, 0.5mm (on both faces) 150mm 19mm 182-131 300mm 25mm 182-151 450mm 30mm 182-171 600mm 30mm Metric Fully-Flexible Rules Order No. Graduations Range Width 182-211   1mm, 0.5mm (on both faces) 150mm 12mm 182-231 300mm 12mm […]

AUTHOR RATE
Mitutoyo-SERIES 516-Accessories for Rectangular Gauge Blocks over 100mm

Specially designed for standard size gauge blocks over 125mm which have two coupling holes on the body: coupling of two long gauge blocks and attachment of jaws is possible. These accessories can also be used for CERA blocks. SPECIFICATIONS Set Order No. Individual Item Order No. Item Description Quantity Supplied         516-605 […]

AUTHOR RATE
Mitutoyo-SERIES 516-Metric/Inch Rectangular Gauge Block Sets

Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the target applications, the level of convenience desired (larger sets offer more combination possibilities) and the environmental conditions in which they will be used. […]

AUTHOR RATE
Mitutoyo-SERIES 547-ABSOLUTE Digimatic Depth Gage

Easy-to-read dial effectively prevents misreading. Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3. SPECIFICATIONS Metric Order No. Range Graduation Stroke Accuracy*4 Measuring force Base Contact point*1 Extension rod*2 Indicator*3 W T flatness 547-211   0 – 200mm 0.01mm   12.7mm ±20μm   1.5N […]

AUTHOR RATE
Mitutoyo-SERIES 7-Dial Depth Gage

Optimal for hole, narrow groove and step measurement. Metric Order No. Range Graduation Accuracy Stroke Measuring force Contact point*1 Extension rod*2 Indicator*3 (dial indicator) W T Flatness Mounting position of a dial indicator 7210 0 – 10mm               0.01mm   ±15μm   10mm   1.4N 40mm     16mm   […]

AUTHOR RATE
Mitutoyo-Optional accessory for Depth Gage-Extension Bases

• Attaches to the base (reference face) plate of a depth gage to extend its span. • Refer to the illustrations at left for attachment details. • Extension base is three times the length of the base for models of less than 300mm range. • These extension bases cannot be attached to 0-600mm, 0-1000mm, 0-24” […]

AUTHOR RATE
Mitutoyo-SERIES 527, 571 – Hook End Type-Depth Gage

The end of the main beam is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement. Coolant proof models achieve IP67 protection level. Enables stable depth measurement with a resolution of 0.01mm. ABSOLUTE Digital Caliper (Refer to page D-8 for ABSOLUTE function.) Digital […]

AUTHOR RATE
Mitutoyo-SERIES 527-Vernier Depth Gage

Standard gage for depth measurement. Optional longer extension bases are available. (Except for models with measuring ranges of 600 and 1000mm) SPECIFICATIONS Metric Order No. Range Vernier reading Accuracy Base (W x T) Remarks 527-201 0 – 150mm     0.05mm ±0.05mm   100 x 6.5mm — 527-202 0 – 200mm — 527-203 0 – […]

AUTHOR RATE
Mitutoyo-SERIES 571-ABSOLUTE Digimatic Depth Gage

Coolant proof models achieve IP67 protection level. Enables stable depth measurement with a  resolution of 0.01mm. ABSOLUTE Digital Caliper (Refer to page D-8 for ABSOLUTE function.) Sliding operation of models with the measuring ranges 150mm (6″), 200mm (8″) and 300mm (12″) is smooth and comfortable. Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory) Optional […]

AUTHOR RATE
Mitutoyo-SERIES 128-Depth Micrometer

Measuring rod diameter: ø4mm Measuring rod lock is attached. *Measuring rod is attached on the rear side of the micrometer. Carbide-tipped measuring rod model is available. Ratchet stop provides constant measuring force. SPECIFICATIONS Metric Order No. Range Graduation Base 128-101   0 – 25mm   0.01mm 63.5 x 16mm 128-103*1 128-102 101.6 x 16mm 128-104*1 *1  with […]

AUTHOR RATE
Mitutoyo-SERIES 329, 129 – Interchangeable Rod Type-Depth Micrometer

This type uses interchangeable rods to enable wide-range measurement. Order Nos. 329-250-30, 329-251-30, 329-350-30, and 329-351-30 allow integration into statistical process control and measurement systems. Measuring rod diameter: ø4mm Measuring rod lock. Ratchet stop provides constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Base No. of rods Digimatic (LCD) 329-250-30 0 – 150mm 0.001mm 101.6 x 16mm 6 […]

AUTHOR RATE
Mitutoyo-SERIES 518 — High Precision ABSOLUTE Digital Height Gage-QM-Height

Best-in-class accuracy ±(2.4+2.1L/600)μm Newly developed high accuracy and high resolution ABSOLUTE linear encoder for position detection. Once origin is set, origin setting is not required each time you turn the power ON (except in the case of a large environmental temperature change). GO/±NG judgment is performed by setting upper and lower tolerances. If a judgment […]

AUTHOR RATE
Mitutoyo-SERIES 518 – High Performance 2D Measurement System-Linear Height

Excellent accuracy of (1.1+0.6L/600)μm with 0.1μm/0.4μm resolution/repeatability. High-accuracy Height Gage incorporating a wide range of measurement functions. To achieve best-in-class accuracy, a highaccuracy reflective-type linear encoder and high-accuracy guide are used. Measurement can be implemented by icon based commands that also support easy one key operation. Perpendicularity (frontal) of 5μm and straightness of 4μm are guaranteed. The TFT LCD […]

AUTHOR RATE
Mitutoyo-SERIES 192 – With digital counter-Dial Height Gage

Easy and error-free reading with both up and down digital counters as well as a dial. Can be zero-set at any arbitrary position. Provided with a large adjustment wheel for easy height adjustment. Clamp can be operated easily and securely. Fits comfortably in the hand and moves easily on the surface plate. Carbide tipped scriber (No. 07GZA000) is […]

AUTHOR RATE
Mitutoyo-SERIES 514, 506 — Standard Height Gage with Adjustable Main Scale-Vernier Height Gage

Fits comfortably in the hand and moves easily on the surface The main scale slides and clamps within the column for quick and convenient zero-setting. Large locking knobs are used both for the slider and fine adjustment clamps to make clamping easy and secure. Operability of slider has been Improved. Large main- scale engraving for […]

AUTHOR RATE
Mitutoyo-SERIES 570 – with ABSOLUTE Linear Encoder-ABSOLUTE Digimatic Height Gage

ABS and INC measurement modes allow efficient operation. Rigid structure makes instrument suitable for use in severe work environments. The +/- measurement function widens the application range. Allows integration into statistical process control and measurement systems. Refer to page A-3. Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory) Battery life is 5,000 […]

AUTHOR RATE
Mitutoyo-SERIES 570 – with ABSOLUTE Linear Encoder-ABSOLUTE Digimatic Height Gage

Allows smooth elevation by the slider adjustment wheel, which is the same as the well-established double-column structure height gage. Large slider-clamp lever ensures positive and accurate clamping action. High durability and high accuracy are ensured by an improved column design (35x15mm). Character height of the LCD display is 10mm. Ergonomic and stylish base fits comfortably  […]

AUTHOR RATE
Mitutoyo-SERIES 192 – Standard Type with SPC Data Output-Digimatic Height Gage

Easy-to-use standard type. Double-column structure ensures high measuring accuracy. Ergonomic base fits comfortably in the hand. Character height of the LCD display has been increased (10mm to 11mm) and a highcontrast LCD display unit adopted, so that readability is improved. Allows integration into statistical process control and measurement systems. Refer to page A-3. Battery: SR44 (1 […]

AUTHOR RATE
Mitutoyo-SERIES 573-Absolute Snap Caliper

ABSOLUTE electromagnetic induction linear encoder system is introduced. Snap mechanism allows continuous and easy measurement without moving the slider by using the lever. The ABSOLUTE Digimatic snap caliper features a spring-loaded mechanism to allow quick and efficient GO/NO-GO inspection for mass production parts. Allows step measurement Displacement of snap part is 2 mm. Measuring force: 7N to […]

AUTHOR RATE
Mitutoyo-SERIES 573-Absolute Low Force Caliper

ABSOLUTE electromagnetic induction linear encoder system is introduced. Due to the low measuring force, these calipers are ideal for measuring elastic workpieces such as plastic parts and rubber parts that standard calipers cannot measure accurately. Allows fine feeding easily by using thumb roller. Displacement of main scale jaw is 0.3mm. Measuring force: 0.49N to 0.98N […]

AUTHOR RATE
Mitutoyo-SERIES 536-Hook Type Vernier Caliper

Can measure width of grooves and lands inside bores and recesses. SPECIFICATIONS Metric Order No. Range* Accuracy Remarks 536-171 0 – 200mm (10.1 – 200mm) ±0.03mm — 536-172 0 – 200mm (2.1 – 200mm) ±0.03mm with fine adjustment * ( ): Dimension in inside measurement DIMENSIONS Range D F L N P S t W […]

AUTHOR RATE
Mitutoyo-Mitutoyo-SERIES 573, 536 — ABSOLUTE Digimatic and vernier type-Neck Caliper-Tube Thickness Caliper

The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness. Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3. […]

AUTHOR RATE
Mitutoyo-SERIES 573, 536 — ABSOLUTE Digimatic and vernier type-Neck Caliper

Can measure wall thickness inside bores and recesses. Digital models are an IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) Allows integration into statistical process control and measurement systems for modwith measurement data output connector. Refer to page A-3. SPECIFICATIONS Metric Digital model […]

AUTHOR RATE
Mitutoyo-SERIES 573, 536 — Knife-edge/Inside Groove/Point Jaw Type-ABSOLUTE Inside Caliper

Specially designed for inside measurements in hard-to-reach places. Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3. SPECIFICATIONS Metric Digital model […]

AUTHOR RATE
Mitutoyo-SERIES 573, 536 — ABSOLUTE Digimatic and vernier type-Blade Type Caliper

The thin blade-type jaws fit into very small grooves and make previously difficult outside measurements far easier to obtain. The outside measuring faces are carbide tipped. Allows step measurement. Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) Allows integration […]

AUTHOR RATE
Mitutoyo-SERIES 573, 536 — ABSOLUTE Digimatic and vernier type-Point Caliper

• Narrow-tip jaws fit into very small grooves and tracks, making many previously difficult outside measurements far easier to obtain. • Allows step measurement. • Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) • SPC output models allow integration into statistical process […]

AUTHOR RATE
Mitutoyo-SERIES 573 – Center-to-Center & Edge-to-Center Types-ABSOLUTE Back-Jaw Centerline Caliper

Specially designed to measure hole Centerto-Center and Edge-to-Center distances. Provided with jaws on the back of the slider, measurements can be read easily from above. A digital model is IP67 Absolute type. (Refer to page D-8 for Absolute function.) Direct reading of pitch measurements is available due to the offset value setting function. Allows integration into […]

AUTHOR RATE
Mitutoyo-SERIES 573, 536 — ABSOLUTE Digimatic and vernier type-Offset Centerline Caliper

Specially designed for hole Center-to-Center measurements on the same, or offset, planes. Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) Direct reading of pitch measurements is available due to the offset-value setting function. Allows integration into statistical process control […]

AUTHOR RATE
Mitutoyo-SERIES 534-Long Jaw Vernier Caliper

Long jaws for measuring hard-to-reach workpiece features. Inside and outside measurements can be read directly from the upper and lower vernier scales. SPECIFICATIONS Metric with inside measurement vernier scale Order No. Range* Accuracy Graduation Remarks 534-113 0 (10.1) – 300mm ±0.04mm   0.02mm   with fine adjustment 534-114 0 (20.1) – 500mm ±0.06mm 534-115 0 (20.1) – […]

AUTHOR RATE
Mitutoyo-SERIES 573, 536 – ABSOLUTE Digimatic and vernier type-Offset Caliper

The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features. Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.) Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to […]

AUTHOR RATE
Mitutoyo-SERIES 534-Long Jaw Vernier Caliper

Long jaws for measuring hard-to-reach workpiece features. Inside and outside measurements can be read directly from the upper and lower vernier scales. SPECIFICATIONS Metric with inside measurement vernier scale Order No. Range* Accuracy Graduation Remarks 534-109 0 (10.1) – 300mm ±0.07mm 0.05mm without fine adjustment 534-110 0 (20.1) – 500mm ±0.13mm * ( ): Minimum dimension […]

AUTHOR RATE
Mitutoyo-SERIES 160 – with Nib Style Jaws and Fine Adjustment-Vernier Caliper

Inside and outside measurements can be read directly from the upper and lower vernier scales. The jaws have radiused measuring faces for accurate inside diameter (ID) measurement. With fine adjustment (except for 160-130/131/132/133/134). SPECIFICATIONS Metric with inside measurement vernier scale Order No. Range* Accuracy Graduations Remarks 160-130 0 (20.1) – 450mm ±0.10mm     0.05mm   […]

AUTHOR RATE
Mitutoyo-SERIES 552 – with Interchangeable Jaws-ABSOLUTE Coolant Proof Carbon Fiber Caliper

IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.) The range of applications can be expanded by using interchangeable jaws (optional). Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3. Provided with preset function for setting a desired starting point, which allows […]

AUTHOR RATE
Mitutoyo-SERIES 552 – with Long Jaws-ABSOLUTE Coolant Proof Carbon Fiber Caliper

IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.) Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws. Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3. SPECIFICATIONS Metric Order No. Range* Accuracy […]

AUTHOR RATE
Mitutoyo-SERIES 552 – with Standard jaws-ABSOLUTE Coolant Proof Carbon Fiber Caliper

IP66 Absolute Digital Caliper (Refer to page D-8 for Absolute function.) Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws. Allows integration into statistical process control and measurement systems for models with measurement data output connector.Refer to page A-3. SPECIFICATIONS Metric Order No. Range* Accuracy 552-302-10 0 – 450mm […]

AUTHOR RATE
Mitutoyo-SERIES 148 – Small Standard Type-Micrometer Heads

Measuring range of 13mm. SPECIFICATIONS Metric Order No. Range Accuracy Stem dia. Stem Spindle end Graduation features 148-104           0 – 13mm           ±2µm           9.5mm Plain   Flat       Standard 148-103 W/ clamp nut 148-121 Plain* 148-120 W/ clamp nut* […]

AUTHOR RATE
Mitutoyo-SERIES 148 — Short Thimble with Choice of Diameter-Micrometer Heads

Short body design maintains measuring range for limited space applications. Available in three thimble diameters to provide ease-of-reading options. DIMENSIONS Technical Data Graduation: 0.01mm or .001” Spindle pitch: 0.5mm or .025”

AUTHOR RATE
Mitutoyo-SERIES 105 — with Anvil Extension Collars-Outside micrometers

Wide measuring range with anvil extension collars 50mm/2” spindle stroke Measuring faces: Carbide Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Graduation Extension Collars Setting Standard (pcs) (every 100mm) 105-408 1000 – 1100mm           0.01mm           1 pc (50mm)       […]

AUTHOR RATE
Mitutoyo SERIES 192 – Multi-function Type with SPC Data Output – Digimatic Height Gage

Double-column structure ensures high measuring accuracy. Ergonomic base fits comfortably in the hand. Bidirectional touch-trigger probe is available as an optional accessory. Character height of the LCD display has been increased (10mm to 11mm) and a high- contrast LCD display unit adopted, so that the readability is improved. Inclined handle improves slider ergonomics. Allows integration into statistical […]

AUTHOR RATE
Post Holders Fat

All measurements are in mm unless otherwise mentioned. Holder Arm length and diameter 3 Points Clamp Magnet Order no. Bottom Thread Weight Post Arm Order No. Force Dimension D3 [Kg] Dia (D1)X Length (L1) Dia (D2)X Length (L2) [N] W L H PH6400 M8 1.700 ø14 x 203 ø12 x 175 PH0310 800 50 60 […]

Gokul Traders Copyright © 2010-18 Developed by Shades Of Web. All rights reserved.