BAKER LEVER DIALS

 

MODEL 29/38 LEVER DIAL GAUGES

FEATURES OF LEVER DIALS

• Specification: IS, DIN, ANSI & JIS
• Every gauge carries a calibration certificate giving actual values
• Lever dials with auto reversal mechanism
• Fitted with jewels and Swiss miniature ball bearings for smoother operation
• Robust and highly sensitive gauge suitable for workshop use
• Metric Gauges conform to IS 11498 and for the European market to DIN 2270
• Inch Gauges conform to ASME B89.1.10M
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available
• Integral dovetail offers flexibility and rigidity for mounting of the gauge
• Metric & Inch gauges are supplied with 2 mm tungsten carbide ball stylus and 8 mm spigot assembly as standard supply
• No additional accessories are offered when suffix A is added to the type number
• Additional 1 mm carbide ball stylus, Height Gauge adaptor, spanner, universal clamp and 4 mm dovetail spigot assembly offered as additional accessories for gauges where type number is without suffix A

 

 

Metric

Bezel Dia.	Type	Reading	Range	Graduation
29mm	302	0.01 mm	0.8 mm	0-40-0
29mm	304	0.002mm	0.2mm	0-10-0
29mm	302A	0.01 mm	0.8 mm	0-40-0
29mm	304A	0.002mm	0.2mm	0-10-0
38mm	306	0.01 mm	0.8 mm	0-40-0
38mm	308	0.002mm	0.2mm	0-10-0
38mm	306A	0.01 mm	0.8 mm	0-40-0
38mm	308A	0.002mm	0.2mm	0-10-0

 

Inch

Bezel Dia.	Type	Reading	Range	Graduation
29mm	301	0.0005″	0.03″	0-15-0
29mm	303	0.0001″	0.008″	0-4-0
29mm	301A	0.0005″	0.03″	0-15-0
29mm	303A	0.0001″	0.008″	0-4-0
38mm	305	0.0005″	0.03″	0-15-0
38mm	307	0.0001″	0.008″	0-4-0
38mm	305A	0.0005″	0.03″	0-15-0
38mm	307A	0.0001″	0.008″	0-4-0

 

Check the PDF

MODEL 29/38 LONG STYLUS LEVER DIAL GAUGES

FEATURES:

• Every gauge carries a calibration certificate giving actual values
• Auto reversal mechanism
• Fitted with jewels and Swiss miniature ball bearings for smoother operation
• Robust and highly sensitive gauge suitable for workshop use
• Metric Gauges conform to IS 11498 and for the European market to DIN 2270
• Inch Gauges conform to ASME B89.1.10M
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available
• Integral dovetail offers flexibility and rigidity for mounting of the gauge
• Metric & Inch gauges are supplied with 2mm tungsten carbide ball stylus and 8 mm spigot assembly as standard supply
• No additional accessories are offered when suffix A is added to the type number

 

Bezel Dia.	Type	Reading	Range	Graduation
29mm	302L	0.01 mm	0.8mm	0-40-0
29mm	302AL	0.01 mm	0.8mm	0-40-0
38mm	306L	0.01 mm	0.8mm	0-40-0
38mm	306AL	0.01 mm	0.8mm	0-40-0

Check the PDF