We are offering a qualitative range of Cast Iron Bench Center that are accurate, precise and offer quick method for inspecting radial run out of camshafts, crankshafts and cylindrical shafts etc. Manufactured as per IS: 5980-1978, these cast iron bench center are utilized in machine shops, tool rooms and standard rooms for checking various parameters such as concentricity, Straightness and True rotation of components. Bench centers manufactured at our works are made up of close grained cast iron and finished to higher degree of accuracy by hand scrapping.
 |
| Sizes mm (L x B) |
Centre Distance mm |
Centre Height mm |
Co-axiality of centres micron (um) |
Parallellism of the axis of the centre with respect to guide ways. |
| 300 X 125 | 300 | 125 | 10 | lOum/300 mm |
| 300 X 160 | 300 | 160 | 10 | lOum/300 mm |
| 500 X 160 | 500 | 160 | 15 | lOum/300 mm |
| 500 X 200 | 500 | 200 | 15 | 15 um/300 mm |
| 750 X 160 | 750 | 160 | 20 | lOum/300 mm |
| 750 X 200 | 750 | 200 | 40 | 15 um/300 mm |
| 1000 X 160 | 1000 | 160 | 20 | lOum/300 mm |
| 1000 X 200 | 1000 | 200 | 40 | 15 um/300 mm |
| 1250 X 160 | 1250 | 160 | 20 | lOum/300 mm |
| 1250 X 200 | 1250 | 200 | 40 | 15 um/300 mm |
| 1500 X 160 | 1500 | 160 | 20 | lOum/300 mm |
| 1500 X 200 | 1500 | 200 | 40 | 15 um/300 mm |
| 2000 X 200 | 2000 | 200 | 40 | 15 um/300 mm |
| 2000 X 250 | 2000 | 250 | 40 | 15 um/300 mm |
| 2500 X 250 | 2500 | 250 | 40 | 15 um/300 mm |
| 2500 X 300 | 2500 | 300 | 40 | 15 um/300 mm |
| 2500 X 500 | 2500 | 500 | 60 | 20um/300 mm |
- Centers are made from high carbon steel hardened and ground finish, having morse taper MT-3 and are replaceable.
- Can provide fabricated stand with levelling screws on request. The overall working height of surface plate with stand and levelling screw will be 900 mm (approx), from floor level
Some of the salient features of our Bench Centers are:
- The base of bench centers and its heads are artificially stress relieved as precaution against distortion.
- One of the center is spring loaded to ensure uniform pressure while holding and easy loading and unloading of work piece without disturbing the accuracy.
- Centers are made from high carbon steel hardened and ground finish, having morse taper MT-3 and are replaceable.
- Both heads are adjustable for easy and quick setting of the required distance between the centers.
- The heavy duty bed is provided with two T-Slots, parallel to each other.
- Bench centers are supplied with computerized calibration certificate traceable to National Physical Laboratory (NPL, Govt of India) New Delhi.