CEM3-G-BTS, (BASIC) DIGITAL TORQUE WRENCH WITH BLUETOOTH

Tohnichi

8 years ago

Digital torque wrench with bluetooth is specialized Version of Standard Model CEM3-G, Digital Torque Wrench, which uses Bluetooth Technology to transmit data
For measuring or tightening applications
- Mainly used for quality inspections in measuring mode or may be used to apply torque for tightening in tightening mode
Collected data is wirelessly transmitted via Bluetooth to PC into Excel file
Requires Bluetooth USB dongle connection to PC (included)
Automatically saves torque data to PC without the limitations of cables
New “-G” Version features multiple unit of measure selection by keypad

Example of typical USB dongle

CEM3-G-BTD (Duplex) For Tightening Applications

Two Way Communication between PC and Wrench for Tightening only
Set up tightening instructions on PC and send instructions for tightening ie target torque and number of fasteners wirelessly to wrench.
Display guides user to properly tighten then shows work complete and instantly sends collected data back to PC
Includes transfer software
Ideal for small cell assembly applications
New “-G” Version features multiple unit of measure selection by keypad

Basic Model	Duplex Model	Min.-Max.	Grad	Min-Max.	Grad.	Min-Max.	Grad.	Dimensions [mm]					Weight approx
Basic Model	Duplex Model	S.I.		Metric	Metric	American	American	L’	L	l1	l2	h1	kg
CEM10N3X8D-G-BTS	CEM10N3X8D-G-BTD	N.m 2-10	Nm 0.01	kgf.cm 20-100	kgf.cm 0.1	in.lbs 20-90	in.lbs 0.1	212	208	63.5	35.6	47	0.54
CEM20N3X10D-G-BTS	CEM20N3X10D-G-BTD	4-20	0.02	40-200	0.2	36-180	0.2	214	217	63.5	35.6	47	0.55
CEM50N3X12D-G-BTS	CEM50N3X12D-G-BTD	10-50	0.05	100-500	0.5	100-450	0.5	282	254	130	36.4	56.5	0.66
CEM100N3X15D-G-BTS	CEM100N3X15D-G-BTD	20-100	0.1	200-1000	1	200-900	1	384	363				0.71
CEM200N3X19D-G-BTS	CEM200N3X19D-G-BTD	40-200	0.2	400-2000	2	ft.lbs 30-150	ft.lbs 0.2	475	467				0.86
CEM360N3X22D-G-BTS	CEM360N3X22D-G-BTD	72-360	0.4	720-3600	4	52-260	0.4	713	722				1.21
CEM500N3X22D-G-BTS	CEM500N3X22D-G-BTD	100-500	0.5	kgf.m 10-50	kgf.m 0.05	72-360	0.5	949	910	230	30	43.5	4.08
CEM850N3X32D-G-BTS	CEM850N3X32D-G-BTD	170-850	1	17-85	0.1	124-620	1	1387	1398	230	30	43.5	5.22

NOTE

Certificate of calibration provided in SI units. Certificates in Metric or American units is available upon request for an additional fee.

Bluetooth Transmitter Module Specifications

Bluetooth version		V1.2
Transmitter	Radio frequency range	2.402～2.480GHz
	Number of channels	79 channels
	Transmission method	AFH
	Modulation method	GFSK
	Radio output	+4dBm
	Receiving sensitivity	-80dBm
Transmission power class		Class2
Communication distance		Approx. 10m※1
Display		Communication status check LED※2
Authentication		TELEC
Continuous Use		Approx 8 hours

NOTE

※1．Communication distance varies depending on surrounding environment.
※2．The LED lights up when communication between the CEM3-BT and receiving equipment is successful.
3. Bluetooth dongle readily available through retailers. Contact Tohnichi for a referral if you require assistance with purchasing.
4.Tohnichi has acquired wireless certifications for USA, Canada, and various countries worldwide. Please contact Tohnichi for confirmation of your country’s wireless certification

ACCURACY	1%±1digit
DISPLAY	7 segments LED　　4 digits
	14 segments LCD　6 digits
	7 segments LCD　　4 digits
	Blue・Red LED
DIGIT HEIGHT	7 segments LED　10mm
	14 segments LCD　7mm
	7 segments LCD　　3mm
DATA MEMORY	999（99 for M-2 mode）
BASIC FUNCTIONS	Peak Hold
	Measurement data（measuring data & time）memory
	Auto memory & reset
	Tightening completion alarm
	OK/NG judgement
	Auto zero
	Auto power off (3 min.)
	Over torque alarm
	Clock
COMMUNICATION FUNCTIONS	RS232C (2400-19200 bps)
COMMUNICATION FUNCTIONS	Serial output corresponding to a USB connector
BATTERY LIFE INDICATOR	Available(4 steps)
POWER	Ni-MH rechargeable battery
CONTINUOUS USE	Approx. 8 hours
RECHARGING TIME	Approx. 3.5 hrs
COMMUNICATION MODE SWITCH	Key Operation
OPERATING CONDITION	０～40℃ （No condensation）