Digimatic Gage / PC Data Input Device USB Input Tool IT-016U/IT-007R

USB Keyboard Signal Conversion Type IT-016U

The IT-016U, a popular USB input tool that enables easy data recording. Allows you to perform inspection work more efficiently.

The IT-016U is equipped with a connector socket for a push-button or switch-foot operation.

Functional improvements include :-

• A bigger, easy-to-press data switch. Size increased from ø4 mm to ø18 mm. Durability of the push button increased from 1 million to 10 million operations.
• May be used with optional software USB-ITPAK V2.1 Enables efficient routine inspection work, for example, in mass production.

RS-232C Communication Conversion Type IT-007R

Input tool for RS-232C communication best suited for communication control of the software!

Control is available by transmitting data request commands via RS-232C.

For example, production engineers can create communication programs to load the measurement data by transmitting a command from the PC. This product is a compact and low-cost RS-232C communication interface, which is convenient when it is installed in a machine tool or dedicated device to feed back measurement data

Main Specifications of IT-016U

Supported driver software: Changeable between two types Output specification: USB2.0 or USB1.0

1. Stand-alone: HID keyboard device.
2. Using USB-ITPAK V2.1: Virtual COM port (VCP)
   Communication speed: 12Mbps (Full Speed)
   Power supply: USB bus power
   USB2.0 certificate
   Conforms to EMC Directives

This product is compatible with the standard driver software for Windows. No dedicated driver software is required.

IT-016U/IT-007R System Configuration

Specifications of IT-007R RS-232C Communication

Output specification: RS-232C compliant
Communication method: Full duplex
Communication speed: 2400bps (fixed)
Bit configuration: Start bit 1
Data length 8
(Most significant bit, 0 (fixed))
Parity, None
Stop bit 1
Flow control: None
Home position: DCE (modem definition)

Data format

Data request signal

Data can be output by transmitting a character from the PC

Connector specification and power supply from the PC

* “4” and “6”, “7” and “8” are connected with each other inside this product.
* When connecting to a sequencer, a power supply is required. Input voltage: Supplied in the range 6 V – 16 V Power supply terminal: Supplied to pins 4 and 7