Heavy Duty Countersinks

NOGA

7 years ago

COUNTERSINK NG3100

The standard tool for countersinking.
Useful for chamfering deep holes.
Includes: NG-3 handle, C holder and
C20 countersink (20mm).

NG-3 Handle NG3000

NogaGrip-3 holds all blade holders.
Designed for maximum comfort in
your hand.

C Holder CH3000

Holds C12, C20 and C30
countersinks. M7 external thread.
Has an hexagonal cross section to
prevent rotating inside handle.
Length: 131mm.

MINI REVERSIBLE RC1000

Very fine tool for deburring both back and front sides of holes.
Range: 3-5.5mm.
Includes: steel handle and R1 blade.

MEDIUM REVERSIBLE RC2000

Range: 5-10mm.
Includes: steel handle and R2 blade.

LARGE REVERSIBLE RC2200

Range: 10-22mm.
Includes: steel handle and R3 blade.

TO REPLACE THE BLADE

Pull the aluminum knob out of the handle. At its end there is an hexagonal key. Use this key to
replace the blade.

All blades of Countersinks below are made of H.S.S.. Hardness 62-64Rc.
BLADES	Order No.	Range (mm)	Countersinking angles (degrees)	Weight (grams)	Package quantity
C12	BC1211	1-12	90	25	1
C20	BC2011	3-20	90	28	1
C30	BC3011	3-30	90	58	1
R1	BR1001	3-5.5	90	5	1
R2	BR2001	5-10	90	7	1
R3	BR3001	10-22	90	8	1

H.D. EXT. ROTODRIVE NG3500

Chamfers the O.D. on bars and tubes.
Range: 8-28mm.
Includes: NG-3 handle, H.D. external
RotoDrive holder, and EX28 countersink.

H.D. ROTODRIVE NG3400

40mm displacement allows for heavy duty burrs to be removed.
Continuous rotation of countersink enables very fast chamfering.
Includes: NG-3 handle, H.D. cranked
RotoDrive holder and C20 countersink.

NG-1 Handle NG1000

NogaGrip-1 holds all S blades
(3.2mm). Designed for maximum
comfort in your hand.

NG-3 Handle NG3000

NogaGrip-3 holds all blade holders.
Designed for maximum comfort in
your hand.

H.D. RotoDrive Holder EL0802

Heavy duty crancked holder. External M7 thread to hold C12, C20 and C30 countersinks.
h 40mm.

H.D. Ext. RotoDrive Holder EL0902

Heavy duty crancked holder. Accepts EX28 external countersink.
h 40mm.

EXT. ROTODRIVE NG1700

Chamfers the O.D. on bars and tubes.
Quickest way to chamfer O.D. on
almost all materials.
Range: 4-18mm.
Includes: NG-1 handle and
external RotoDrive
EX18 countersink.

ROTODRIVE NG1200

The quickest way to chamfer by hand.
Single flute countersink provides a
smoother cut.
Includes: NG-1 handle and RD10.4
RotoDrive countersink.

All blades below are made of H.S.S.. Hardness 62-64Rc.
BLADES	Order No.	Range (mm)	Countersinking angles(degrees)	Weight (grams)	Package quantity
RD3.2	BC3201	0-3	90	6	1
RD6.3	BC6301	1-6.3	90	10	1
RD8.3	BC8301	1-8.3	90	12	1
RD10.4	BC1041	1-10.4	90	15	1
RD16.5	BC1651	1-16.5	90	34	1
C12	BC1211	1-12	90	25	1
C20	BC2011	3-20	90	28	1
C30	BC3011	3-30	90	58	1
EX18	EX2001	4-18	90	16	1
EX28	EX3001	8-28	90	40	1