Description:
- Can change probes
- Dual-coil probe for high accuracy
- Universal testing angle, no need to set impact direction
- Based on Leeb (HLD), converted to Vickers (HV), Brinell (HB), Rockwell (HRC, HRA and HRB), Shore (HS) and tensile strength (SGM)
- Dual value display, shows both Leeb and converted hardness
- Large LCD display with backlight
- Can choose large font display and statistics display
- Automatically calculate maximum, minimum and average value
- Save 300 data
- Operating temperature: -10°C-’45°C
- According to ASTM A956, DIN 50156, GB/T 17394
Specification:
| Code | HDT-LP200 | HDT-LP200B |
| Printer | not included | included |
| Output | bluetooth | |
| Resolution | 1HLD/1HV/1HB/0.1HRC/0.1HRB/ 0.1HRA/0.1HS/1SGM | |
| Accuracy | ±6HLD (when HLD=800) | |
| Measuring range | HL 100-960/HRC 0.9-79.2/HRB 1-140/ HB 1-1878/HV 1-1698/HS 0.5-1370/ HRA 1-88.5/SGM (rm) 1-6599N/mm2 | |
| Power supply | 2xAA battery | |
| Dimension | 127x67x30mm | |
| Weight | 240g | |
Standard Delivery:
| Main unit | 1 pc |
| Hardness test block D | 1 pc |
| Small support ring | 1 pc |
| Cleaning brush | 1 pc |
| Impact device D | 1 pc |
| Printer (inclded in HDT-LP200B) | 1 pc |
Applicable Workpiece:
| Impact device | DC | C | D | D+15 | DL | E | G | |
| Application | inner wall of small space |
small or thin workpiece, coating layer | general use |
deep groove |
narrow slot or small hole |
very hard material |
casting or forging workpiece |
|
| Maximum roughness of workpiece (Ra) | 2pm | 0.4pm | 2pm | 2pm | 2pm | 2pm | 7pm | |
| Minimum weight of workpiece | direct measurement | 5kg | 1.5kg | 5kg | 5kg | 5kg | 5kg | 15kg |
| on solid support | 2kg | 0.5kg | 2kg | 2kg | 2kg | 2kg | 5kg | |
| coupled on plate | 0.05kg | 0.02kg | 0.05kg | 0.1 kg | 0.05kg | 0.05kg | 0.5kg | |
| Minimum thickness of workpiece | 3mm | 1mm | 3mm | 3mm | 3mm | 3mm | 10mm | |