MAGNETIC V BLOCKS
- Magnetic v blocks used for Grinding, light Milling, Drilling & Inspection of
Round & Square Jobs.
- Accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 150mml & 0.010 mm for 200 mm L of 11V 11 block
- The Bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance.
- Uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & Vface
- Hardness of Vface is 60±2 Re.
- Magnetic v blocks with easy ON- OFF facility.
- 1200 11 V II angle also available.
  |
| Cat No. |
Size |
Range (mm) |
Pull |
| UL-10101 Soft |
40L X 40W X 50H [2″] |
¢ 3 -¢ 25 |
25 Kg |
| UL-10101 Hard |
40L X 40W X 50H [2″] |
¢ 3 -¢ 25 |
25 Kg |
| UL-10102 Soft |
75L X 56W X 75H [3″] |
¢5-¢40 |
75 Kg |
| UL-10102 Hard |
75L X 56W X 75H [3″] |
¢5-¢40 |
75 Kg |
| UL-10103 Soft |
lOOL X 70W X 95H [4″] |
¢ 5 -¢ 65 |
100 Kg |
| UL-10103 Hard |
lOOL X 70W X 95H [4″] |
¢ 5 -¢ 65 |
125 Kg |
| UL-10104 Soft |
150L X 75W X 100H [6″] |
¢ 5-¢ 70 |
125 Kg |
| UL-10104 Hard |
150L X 75W X 100H [6″] |
¢ 5-¢ 70 |
150 Kg |
| UL-10105 Soft |
200L X 125W X 150H [8″] |
¢ 10-¢ 140 |
175 Kg |
| UL-10105 Hard |
200L X 125W X 150H [8″] |
¢ 10-¢ 140 |
175 Kg |
