- Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole.
- Three-Point contact measuring head enables highly repeatable measurement data to be obtained.
- The ABSOLUTE linear encoder eliminates overspeed errors.
- GO/NO-GO judgment function.
- Dual HOLD function buttons, optimally located, enable high operability.
- 330-degree rotatable display unit for easy reading at any angle.
- Measurement can be made close to the bottom of a blind hole.
Range (mm) L3 (mm) L4 (mm) L5 (mm) 6 – 12 2 or below — 2.5 12 – 20 0.3 or below
5.6 3.5 20 – 30 8.3 5.2 30 – 50 13.0 10 50 – 125 17.0 14 
- Can measure deep holes by attaching an optional extension rod.
- Digimatic output port enables inclusion in a statistical process control or networked measurement (Refer to page A-3 for details.)
- Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as (Refer to page A-5 for details.)
- Interchangeable-Head Bore Gages are available in part sets and full
- For details of Setting rings, refer to page C-47.
Large LCD
Character height of 11mm (1.5 times the character area of conventional 8.5mm products)
Three large buttons
The three large-button design employed by ID-N/ID-B, the ABSOLUTE coolant proof Digimatic indicators, enables easier and simpler operation.
Function locking
Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake.
SPECIFICATIONS
Metric individual
| Order No. |
Range*2 |
Accuracy*1 |
Mass |
Accessories (optional)*2 | |
|---|---|---|---|---|---|
| Extension Rod | SPC cable | ||||
| 568-361 | 6 – 8mm |
±5µm (within 5µm) |
480g |
952322 (100mm) |
905338 (1mm)
905409 (2mm) |
| 568-362 | 8 – 10mm | 485g | |||
| 568-363 | 10 – 12mm | ||||
| 568-364 | 12 – 16mm | 475g |
952621 (150mm) |
||
| 568-365 | 16 – 20mm | 480g | |||
| 568-366 | 20 – 25mm |
±6µm (within 6µm) |
540g |
952622 (150mm) |
|
| 568-367 | 25 – 30mm | 555g | |||
| 568-368 | 30 – 40mm | 565g | |||
| 568-369 | 40 – 50mm | 610g | |||
| 568-370 | 50 – 63mm | 730g |
952623 (150mm) |
||
| 568-371 | 62 – 75mm | 740g | |||
| 568-372 | 75 – 88mm | 790g | |||
| 568-373 | 87 – 100mm | 800g | |||
| 568-374 | 100 – 113mm | 900g | |||
| 568-375 | 112 – 125mm | 910g | |||
Inch/Metric individual
|
Order No. |
Range*2 |
Accuracy*1 |
Mass |
Extension Rod (optional)*2 | |
|---|---|---|---|---|---|
| Extension Rod | SPC cable | ||||
| 568-461 | .275″- .35″ |
±.00025″ (within .00025”) |
480g |
952322 (100mm) |
905338 (1mm)
905409 (2mm) |
| 568-462 | .35″- .425″ | 485g | |||
| 568-463 | .425″- .5″ | ||||
| 568-464 | .5″- .65″ | 475g |
952621 (150mm) |
||
| 568-465 | .65″- .8″ | 480g | |||
| 568-466 | .8″- 1″ |
±.0003″ (within .0003”) |
540g |
952622 (150mm) |
|
| 568-467 | 1″- 1.2″ | 555g | |||
| 568-468 | 1.2″- 1.6″ | 565g | |||
| 568-469 | 1.6″- 2″ | 610g | |||
| 568-470 | 2″- 2.5″ | 730g |
952623 (150mm) |
||
| 568-471 | 2.5″- 3″ | 740g | |||
| 568-472 | 3″- 3.5″ | 790g | |||
| 568-473 | 3.5″- 4″ | 800g | |||
| 568-474 | 4″- 4.5″ | 900g | |||
| 568-475 | 4.5″- 5″ | 910g | |||
* 1 Excluding quantizing error
Instrumental error excluding quantizing error (maximum error)
*2 The measurement range cannot be enlarged by measuring heads that are not standard-supplied (the accuracy is not guaranteed).
Note: Setting rings are optional.
DIMENSIONS
| Range | L2 | L1 |
|---|---|---|
| 6 – 8, 8 – 10, 10 – 12 mm | 83 | 284 |
| 12 – 16, 16 – 20 mm | 53 | 255 |
| 20 – 25, 25 – 30mm | 59 | 261 |
| 30 – 40, 40 – 50mm | 67 | 269 |
| 50 – 63, 62 – 75, 75 – 88, 87 – 100, 100 – 113, 112 – 125mm | 75 | 277 |
External appearance differs depending on the measuring range.
Technical Data
Resolution: 0.001mm or .00005″/0.001mm Display: LCD
Response speed: Infinite Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory) Battery life: Approx. 5,000 hours in continuous use
Scale type: Electrostatic capacitance type absolute encoder
Functions
GO/NO-GO judgment GO/NO-GO judgment zoom 2-Point Preset
Zero-setting
Data hold, Error alarm
Low battery voltage alert
Data output
Function Lock
330° rotary display
inch/mm conversion (inch/mm models)
For details of Custom-ordered Products, refer to page C-49.
Optional accessories
Refer to page A-21 for details
USB Input Tool Direct (2m): 06ADV380F Connecting cables for U-WAVE-T For standard (160mm): 02AZD790F For foot switch: 02AZE140F