Detector

  • Standard detectors

Code No. Measuring force Stylus Remarks
178-296 0.75mN 2µmR /60˚ Dedicated to the standard/retractable drive unit
178390 4 mN 5µmR /90˚
178387 0.75mN 2µmR /60˚ Dedicated to the transverse tracing drive unit
178386 4 mN 5µmR /90˚
178391 4 mN 10µmR /90˚

Dedicated to the standard/

retractable drive unit

*Tip radius /Tip angles

  • Small hole detectors

Code No. Measuring force Stylus profiles* Remarks
178383 0.75mN 2 µmR /60˚ Minimum measurable hole diameter: ø4.5mm
178392 4 mN 5 µmR /90˚

*Tip radius /Tip angles

  • Extra small hole detectors

Code No. Measuring force Stylus profiles* Remarks
178384 0.75mN 2 µmR /60˚ Minimum measurable hole diameter: ø2.8mm
178393 4 mN 5 µmR /90˚

*Tip radius /Tip angles

  • Gear-tooth surface detectors

Code No. Measuring Stylus profiles*
178388 0.75mN 2 µmR /60˚
178398 4 mN 5 µmR /60˚

*Tip radius /Tip angles

  • Deep groove detectors

Code No. Measuring force Stylus profiles* Remarks
178385 0.75mN 2 µmR /60˚ Not available for the transverse tracing drive unit
178394 4 mN 5 µmR /90˚

*Tip radius /Tip angles

Optional Accessories for Drive Units

  • Nosepiece for flat surfaces

No.12AAA217 *Standard accessory for the standard/retractable drive unit of the SJ-310 series
*Not available for the transverse tracing drive unit

  • V-type adapter

No.12AAE644 *Transverse tracing type standard accessory.
*Dedicated to the transverse tracing drive unit.

  • Extension rod (50mm)

No.12AAA210 *Not available for the transverse tracing drive unit

  • Adapter for flat surface No.12AAA219
    *Not available for the transverse tracing drive unit

  • Magnetic stand adapter
    No.12AAA221 (Shaft diameter of the mounting section: ø8mm)
    No.12AAA220 (Shaft diameter of the mounting section: ø9.5mm)

  • Nosepiece for cylindrical surfaces
    No.12AAA218
    *Standard accessory for the standard/retractable drive unit of the SJ-310 series
    *Not available for the transverse tracing drive unit

  • Point-contact adapter
    No.12AAE643
    *Transverse tracing type standard accessory.
    *Dedicated to the transverse tracing drive unit

  • Extension cable (1m)(Note: Only one rod can be used.)
    No.12BAA303
    *For the connection between the calculation display unit and drive unit

  • Support feet set
    No.12AAA216
    *Standard accessory for the standard/retractable drive unit of the SJ-310 series
    *Not available for the transverse tracing drive unit *Adjustment range is 28mm from bottom face.
  • Height gage adapter
    Note:Dedicated to the height gage whose scriber mounting dimensions are 9 ×9 mm