Detector
- Standard detectors
| Code No. | Measuring force | Stylus | Remarks |
|---|---|---|---|
| 178-296 | 0.75mN | 2µmR /60˚ | Dedicated to the standard/retractable drive unit |
| 178–390 | 4 mN | 5µmR /90˚ | |
| 178–387 | 0.75mN | 2µmR /60˚ | Dedicated to the transverse tracing drive unit |
| 178–386 | 4 mN | 5µmR /90˚ | |
| 178–391 | 4 mN | 10µmR /90˚ |
Dedicated to the standard/ retractable drive unit |
*Tip radius /Tip angles
- Small hole detectors
| Code No. | Measuring force | Stylus profiles* | Remarks |
|---|---|---|---|
| 178–383 | 0.75mN | 2 µmR /60˚ | Minimum measurable hole diameter: ø4.5mm |
| 178–392 | 4 mN | 5 µmR /90˚ |
*Tip radius /Tip angles
- Extra small hole detectors
| Code No. | Measuring force | Stylus profiles* | Remarks |
|---|---|---|---|
| 178–384 | 0.75mN | 2 µmR /60˚ | Minimum measurable hole diameter: ø2.8mm |
| 178–393 | 4 mN | 5 µmR /90˚ |
*Tip radius /Tip angles
- Gear-tooth surface detectors
| Code No. | Measuring | Stylus profiles* |
|---|---|---|
| 178–388 | 0.75mN | 2 µmR /60˚ |
| 178–398 | 4 mN | 5 µmR /60˚ |
*Tip radius /Tip angles
- Deep groove detectors
| Code No. | Measuring force | Stylus profiles* | Remarks |
|---|---|---|---|
| 178–385 | 0.75mN | 2 µmR /60˚ | Not available for the transverse tracing drive unit |
| 178–394 | 4 mN | 5 µmR /90˚ |
*Tip radius /Tip angles
Optional Accessories for Drive Units
- Nosepiece for flat surfaces
No.12AAA217 *Standard accessory for the standard/retractable drive unit of the SJ-310 series
*Not available for the transverse tracing drive unit
- V-type adapter
No.12AAE644 *Transverse tracing type standard accessory.
*Dedicated to the transverse tracing drive unit.
- Extension rod (50mm)
No.12AAA210 *Not available for the transverse tracing drive unit
- Adapter for flat surface No.12AAA219
*Not available for the transverse tracing drive unit
- Magnetic stand adapter
No.12AAA221 (Shaft diameter of the mounting section: ø8mm)
No.12AAA220 (Shaft diameter of the mounting section: ø9.5mm)
- Nosepiece for cylindrical surfaces
No.12AAA218
*Standard accessory for the standard/retractable drive unit of the SJ-310 series
*Not available for the transverse tracing drive unit
- Point-contact adapter
No.12AAE643
*Transverse tracing type standard accessory.
*Dedicated to the transverse tracing drive unit
- Extension cable (1m)(Note: Only one rod can be used.)
No.12BAA303
*For the connection between the calculation display unit and drive unit
- Support feet set
No.12AAA216
*Standard accessory for the standard/retractable drive unit of the SJ-310 series
*Not available for the transverse tracing drive unit *Adjustment range is 28mm from bottom face.
- Height gage adapter
Note:Dedicated to the height gage whose scriber mounting dimensions are 9 ×9 mm
