Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
Two-directional ratchet stop.
For ID and OD (except for 0 – 25mm) measurement, a master gage is required for adjusting the reference point.
SPECIFICATIONS
Metric
| Order No. | Range Outside | Range Inside | Graduation | Accuracy | Flange | |
|---|---|---|---|---|---|---|
| Rotating spindle | ||||||
| 146-121 | 0 – 25mm | 1.6 – 26.5mm |
0.01mm |
±10µm |
06.35mm | |
| 146-122 |
012.7mm |
|||||
| 146-123 | 25 – 50mm | 26.5 – 51.5mm | ||||
| 146-124 | 50 – 75mm | 51.5 – 76.5mm | ||||
| 146-125 | 75 – 100mm | 76.5 – 101.5mm | ||||
Inch
| Order No. | Range Outside | Range Inside | Graduation | Accuracy | Flange | |
|---|---|---|---|---|---|---|
| Rotating spindle |
0.25″ |
|||||
| 146-131 | 0 – 1″ | .055″ – 1.05″ |
.001″ |
±.0004″ |
||
| 146-132 |
0.5″ |
|||||
| 146-133 | 1″ – 2″ | 1.05″ – 2.05″ | ||||
| 146-134 | 2″ – 3″ | 2.05″ – 3.05″ | ||||
| 146-135 | 3″ – 4″ | 3.05″ – 4.05″ | ||||
Metric
| Order No. | Range Outside | Range Inside | Graduation | Accuracy | Flange |
|---|---|---|---|---|---|
| Non-rotating spindle | |||||
| 146-221 | 0 – 25mm | 1.6 – 26.5mm |
0.01mm |
±10µm |
06.35mm |
| 146-222 |
012.7mm |
||||
| 146-223 | 25 – 50mm | 26.5 – 51.5mm | |||
| 146-224 | 50 – 75mm | 51.5 – 76.5mm | |||
| 146-225 | 75 – 100mm | 76.5 – 101.5mm | |||
Inch
| Order No. | Range Outside | Range Inside | Graduation | Accuracy | Flange |
|---|---|---|---|---|---|
| Non-rotating spindle |
0.25″ |
||||
| 146-231 | 0 – 1″ | .055″ – 1.05″ |
.001″ |
±.0004″ |
|
| 146-232 |
0.5″ |
||||
| 146-233 | 1″ – 2″ | 1.05″ – 2.05″ | |||
| 146-234 | 2″ – 3″ | 2.05″ – 3.05″ | |||
| 146-235 | 3″ – 4″ | 3.05″ – 4.05″ | |||
DIMENSIONS
Technical data
Parallelism: 10μm/.0004”
Standard accessories: Spanner (301336), 1 pc
