Adjustable hand dial gauge

  • The hand position can be adjusted independently of the position of the spindle by rotating the top knob.

DIMENSIONS

* Contact points, other than dedicated types, cannot be installed.
* The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. For this reason, if you need to install an optional contact point with an outside diameter smaller than 7mm, use a washer (with outside diameter of at least 7mm, inside diameter of 3mm, and thickness of approx. 0.5mm) placed between the contact point and the spindle.

SPECIFICATIONS
Metric

Order No. Graduation Range (range/rev) Accuracy Repeat- ability Dial reading Measuring force
w/ lug Flat-back Overall Retrace 1/10 Rev 1 Rev
2048S-10 2048SB-10 0.01mm 10mm (1mm) 15µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

Order No. Graduation Range (range/rev) Accuracy Repeat- ability Dial reading Measuring force
w/ lug Flat-back First 1 Rev / 2.5 Rev / 10 Rev Retrace
2915S-10 2915SB-10 .001” .5” (.1”) ±.001” / ±.001” / ±.001 .0002 ±.0002 ±0-100 1.8N or less
2918S-10 2918SB-10 .001” .5” (.1”) ±.001” / ±.001” / ±.001 .0002 ±.0002 0-50-0 1.8N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

FEATURES

Metric

Inch