- The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
- Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
- The spindle is made of high-strength quenchhardened stainless steel which resists arduous use.
- A carbide contact point is used.
- A special alloy is used for the sector gears to provide improved wear resistance.
- The indicator uses jeweled bearings, providing excellent indication sensitivity and durability.
- Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.
DIMENSIONS
| Order No. | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|
| 2109S-10 | 48.8 | 60.5 | 57 | 17.7 | 20 | 16.9 | 15.1 | 52 | 7.6 |
| 2110S-10 | 48.8 | 66.5 | 57 | 17.7 | 20 | 16.9 | 21.1 | 52 | 7.6 |
| 2113S-10 | 48.8 | 61 | 57 | 17.7 | 20 | 16.9 | 15.6 | 52 | 7.6 |
| 2118S-10 | 48.8 | 60.3 | 57 | 17.7 | 20 | 16.9 | 14.9 | 52 | 7.6 |
| 2119S-10 | 48.8 | 60.3 | 57 | 17.7 | 20 | 16.9 | 14.9 | 52 | 7.6 |
| 2124S-10 | 48.8 | 60.3 | 57 | 17.7 | 20 | 16.9 | 14.9 | 52 | 7.6 |
SPECIFICATIONS
Metric
| Order No. | Graduation | Range (range/rev) | Accuracy | Repeat- ability | Dial reading | Measuring force | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| w/ lug | Flat-back | Overall | Retrace | 1/10 Rev | 1 Rev | |||||
| 2109S-10 | 2109SB-10 | 0.001mm | 1mm (0.2mm) | 5µm | 2µm | 2µm | 4µm | 0.5µm | 0-100-0 | 1.5N or less |
| 2110S-10 | 2110SB-10 | 0.001mm | 1mm (0.1mm) | 5µm | 2µm | 2µm | 4µm | 0.5µm | ±0-100 | 1.8N or less |
| 2113S-10 | 2113SB-10 | 0.001mm | 2mm (0.2mm) | 7µm | 2µm | 2µm | 5µm | 0.5µm | 0-100-0 | 1.5N or less |
| 2118S-10 | 2118SB-10 | 0.001mm | 5mm (0.2mm) | 10µm | 3µm | 3.5µm | 6µm | 1µm | 0-100-100 | 1.5N or less |
| 2119S-10 | 2119SB-10 | 0.001mm | 5mm (0.2mm) | 10µm | 3µm | 3.5µm | 6µm | 1µm | 0-100-0 | 1.5N or less |
| 2124S-10 | 2124SB-10 | 0.005mm | 5mm (0.5mm) | 12µm | 3µm | 5µm | 9µm | 3µm | ±0-50 | 1.5N or less |
* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.
FEATURES
