• Standard 0.01mm graduation dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard.
  • The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
  • Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
  • The spindle is made of high-strength quenchhardened stainless steel suitable for heavyduty use.
  • A carbide contact point is used.
  • The grand gear is made of stainless steel with high resistance to wear and deformation.
  • Application of a hard coating on the surface of the crystal makes the gage highly scratchand chemical-resistant.

DIMENSIONS

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/ JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.

Order No. A B C D E F G H I
2046S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2046S-09 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2047S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2902S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2310S-10 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2044S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2044S-09 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2045S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6

SPECIFICATIONS

Metric

Order No. Graduation Range (range/rev) Accuracy Repeat- ability Dial reading Measuring force
w/ lug Flat-back Overall Retrace 1/10 Rev 1 Rev
2046S 2046SB 0.01mm 10mm (1mm) 13µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less
2046S-09 2046SB-09 0.01mm 10mm (1mm) 15µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less
2047S 2047SB 0.01mm 10mm (1mm) 13µm 3µm 5µm 10µm 3µm 0-50-0 1.4N or less
2902S 2902SB 0.01mm 10mm (1mm) 13µm 3µm 5µm 10µm 3µm 100-0 1.4N or less
2310S-10 2310SB-10 0.01mm 10mm (1mm) 15µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less
2044S 2044SB 0.01mm 5mm (1mm) 12µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less
2044S-09 2044SB-09 0.01mm 5mm (1mm) 12µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less
2045S 2045SB 0.01mm 5mm (1mm) 12µm 3µm 5µm 10µm 3µm 0-50-0 1.4N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.