- Dial indicators with a large-diameter dial face for easy reading.
- Models with longer measuring ranges are also available.
- All types are supplied with limit markers and a bezel clamp as standard.
- Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
- The bezel clamp and lifting lever (optional)*1 can be attached to either the right or left side. These parts can be easily installed and removed without tools.
*1: Can be attached only to Code No. 3046S, 3047S, 3050S, 3109S-10 and 4046S.
DIMENSIONS
| Order No. | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|
| 3046S | 61.2 | 75.5 | 78 | 17.7 | 21 | 15.9 | 20.6 | 71 | 9 |
| 3047S | 61.2 | 75.5 | 78 | 17.7 | 21 | 15.9 | 20.6 | 71 | 9 |
| 3050S | 52.6 | 94 | 78 | 17.7 | 21 | 25.9 | 29.1 | 71 | 9 |
| 3052S-19* | 72.9 | 104.3 | 78 | 17.7 | 21 | 25.9 | 39.4 | 71 | 9 |
| 3058S-19* | 81.9 | 142.3 | 78 | 17.7 | 21 | 43.9 | 59.4 | 71 | 9 |
| 3060S-19* | 120.9 | 202.3 | 78 | 17.7 | 21 | 73.9 | 89.4 | 71 | 9 |
| 3062S-19* | 141.9 | 243.3 | 78 | 17.7 | 21 | 94.9 | 109.4 | 71 | 9 |
| 3109S-10 | 61.2 | 79 | 78 | 17.7 | 21 | 25.9 | 14.1 | 71 | 9 |
| 4046S | 61.2 | 84 | 92 | 21.5 | 21 | 18.9 | 19.1 | 71 | 9 |
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.
* The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. For this reason, if you need to install an optional contact point with an outside diameter smaller than 7mm, use a washer (with outside diameter of at least 7mm, inside diameter of 3mm, and thickness of approx. 0.5mm) placed between the contact point and the spindle.
| Order No. | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|
| 3414S | 52.6 | 73.4 | 78 | 17.7 | 19 | 12.6 | 21.8 | 71 | 9 |
| 3415S | 52.6 | 73.4 | 78 | 17.7 | 19 | 12.6 | 21.8 | 71 | 9 |
| 3416S | 52.6 | 86.1 | 78 | 17.7 | 19 | 12.6 | 34.5 | 71 | 9 |
| 3417S | 52.6 | 86.1 | 78 | 17.7 | 19 | 12.6 | 34.5 | 71 | 9 |
| 3424S-19* | 84 | 149.3 | 78 | 17.7 | 19 | 50.6 | 59.7 | 71 | 9 |
| 3426S-19* | 123 | 198.1 | 78 | 17.7 | 19 | 73.9 | 85.2 | 71 | 9 |
| 3428S-19* | 144 | 244.5 | 78 | 17.7 | 19 | 94.9 | 110.6 | 71 | 9 |
| 3803S-10 | 61.2 | 59.7 | 78 | 17.7 | 19 | 12.6 | 8.1 | 71 | 9 |
| 3802S-10 | 61.2 | 59.7 | 78 | 17.7 | 19 | 12.6 | 8.1 | 71 | 9 |
| 3052S-11* | 72.9 | 102.4 | 78 | 17.7 | 19 | 25.9 | 37.5 | 71 | 9 |
| 3058S-11* | 81.9 | 147.1 | 78 | 17.7 | 19 | 50.6 | 57.5 | 71 | 9 |
| 4887S-19* | 123 | 198.1 | 92 | 21.5 | 19 | 66.9 | 85.2 | 71 | 9 |
SPECIFICATIONS
Metric
| Order No. | Graduation | Range (range/rev) | Accuracy | Repeat- ability | Dial reading | Measuring force | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| w/ lug | Flat-back | Overall | Retrace | 1/10 Rev | 1 Rev | |||||
| 3046S | 3046SB | 0.01mm | 10mm (1mm) | 15µm | 3µm | 5µm | 10µm | 3µm | ±0-100 | 1.4N or less |
| 3047S | 3047SB | 0.01mm | 10mm (1mm) | 15µm | 3µm | 5µm | 10µm | 3µm | 0-50-0 | 1.4N or less |
| 3050S | 3050SB | 0.01mm | 20mm (1mm) | 20µm | 5µm | 8µm | 15µm | 4µm | ±0-100 | 2.0N or less |
| 3052S-19 | 3052SB-19 | 0.01mm | 30mm (1mm) | 25µm | 7µm | 10µm | 15µm | 5µm | ±0-100 | 2.5N or less |
| 3058S-19 | 3058SB-19 | 0.01mm | 50mm (1mm) | 30µm | 8µm | 10µm | 15µm | 5µm | ±0-100 | 3.0N or less |
| 3060S-19* | 3060SB-19* | 0.01mm | 80mm (1mm) | 45µm | 9µm | 12µm | 20µm | 5µm | ±0-100 | 3.0N or less |
| 3062S-19* | 3062SB-19* | 0.01mm | 100mm (1mm) | 50µm | 9µm | 12µm | 20µm | 5µm | ±0-100 | 3.2N or less |
| 3109S-10 | 3109SB-10 | 0.001mm | 1mm (0.2mm) | 5µm | 2µm | 2µm | 4µm | 0.5µm | 0-100-0 | 1.5N or less |
| 4046S | 4046SB | 0.01mm | 10mm (1mm) | 15µm | 3µm | 5µm | 10µm | 3µm | ±0-100 | 1.4N or less |
*1 Use in a vertical position (contact point downward) for the long stroke model.
*2 Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.
Inch
| Order No. | Graduation | Range (range/rev) | Accuracy | Repeat- ability | Dial reading | Measuring force | ||
|---|---|---|---|---|---|---|---|---|
| w/ lug | Flat-back | First 1 Rev / 2.5 Rev / 10 Rev | Retrace | |||||
| 3414S | 3414SB | .001” | .5” (.1”) | ±.001” / ±.001” / ±.001” | .0002” | ±.0002” | ±0-100 | 1.8N or less |
| 3415S | 3415SB | .001” | .5” (.1”) | ±.001” / ±.001” / ±.001” | .0002” | ±.0002” | 0-50-0 | 1.8N or less |
| 3416S | 3416SB | .001” | 1” (.1”) | ±.001” / ±.001” / ±.002” | .0002” | ±.0002” | ±0-100 | 1.8N or less |
| 3417S | 3417SB | .001” | 1” (.1”) | ±.001” / ±.001” / ±.002” | .0002” | ±.0002” | 0-50-0 | 1.8N or less |
| 3424S-19 | 3424SB-19 | .001” | 2” (.1”) | ±.001” / ±.001” / ±.002” / ±.003” (20Rev) | .00033” | ±.0002” | ±0-100 | 3.0N or less |
| 3426S-19* | 3426SB-19* | .001” | 3” (.1”) |
±.001” / ±.001” / ±.002” / ±.003” (20Rev) / ±.005” (Over 20Rev) |
.00033” | ±.0002” | ±0-100 | 3.0N or less |
| 3428S-19* | 3428SB-19* | .001” | 4” (.1”) |
±.001” / ±.001” / ±.002” / ±.003” (20Rev) / ±.005” (Over 20Rev) |
.00033” | ±.0002” | ±0-100 | 3.2N or less |
| 3802S-10 | 3802SB-10 | .0001” | .025” (.01”) | ±.0001” / ±.0001” / — | .0001” | ±.00003” | 0-10 | 2.0N or less |
| 3803S-10 | 3803SB-10 | .0001” | .025” (.01”) | ±.0001” / ±.0001” / — | .0001” | ±.00003” | 0-5-0 | 2.0N or less |
| 4887S-19* | 4887SB-19* | .001” | 3” (.1”) |
±.001” / ±.001” / ±.002” / ±.003” (20Rev) / ±.005” (Over 20Rev) |
.00033” | ±.0002 | ±0-100 | 3.0N or less |
*1 Use in a vertical position (contact point downward) for the long stroke model.
*2 Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed
FEATURES
Metric
Inch
