• ABS Coolant Proof Caliper with Dust/Water Protection conforming to IP67 Level. Can be used in workshop conditions exposed to coolant, water, dust or oil. 100% air-leak test ensures every caliper conforms to IP67.
  • Font height is 9mm (increased by 22%) and visibility is improved (except for 0 – 300mm/0 – 12″ models).
  • Battery cap does not require a screw driver for battery replacement (except for  0 – 300mm / 0 – 12″ models).
  • Extended battery life of 5 years due to low current integrated circuit (except for 0 – 300mm/0 – 12″ models).
  • Easy to use — advanced ergonomic design uses only 1 button.
  • Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
  • The automatic power-on/off function shuts down the LCD display after 20 minutes inactivity, but the ABS scale origin is unaffected. Power is restored to the display when the slider is moved.
  • Stepped features can be measured.
  • Can be integrated into statistical process control and measurement systems.
  • An inspection certificate is supplied as standard. (However, this cannot be used as a calibration certificate as it is undated.)

A built-in ABS (absolute) scale means that these calipers are ready to use immediately after power-on without origin resetting – just like using a vernier caliper.

Optional accessories

Connecting cables for IT/DP/MUX*
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)
* Cannot be used for other than water resistant type Digital calipers with external output function

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch

IP67 protection level

For details of the test conditions used in evaluating each degree of protection, please refer to the original standard.

SPECIFICATIONS

Metric

Order No. Range Accuracy* Mass Measurement data output port Thumb roller Remarks
500-702-20 0 – 150mm

 

 

 

 

±0.02mm

168g

 

 

 

 

 
500-703-20 0 – 200mm 198g  
500-712-20 0 – 150mm 168g

 

 

 

 
500-713-20 0 – 200mm 198g  
500-719-20 0 – 150mm 168g Depth bar ø1.9mm
500-721-20 0 – 150mm 168g Carbide-tipped jaws for outside measurement
500-722-20 0 – 200mm 198g
500-723-20 0 – 150mm 168g Carbide-tipped jaws for ouatside and inside measurement
500-724-20 0 – 200mm 198g
500-714-10

 

0-300mm

 

±0.03mm

350g      
500-718-11 345g  
500-704-10 350g    
500-708-11 345g  

* Not including quantizing error of ±1 count in LSD

Inch/Metric

Order No. Range Accuracy* Mass Measurement data output port Thumb roller Remarks
500-731-20 0 – 6″

 

 

 

 

 

 

±.001″/

±0.02mm

168g

 

 

 

 

 

 

 

Carbide-tipped jaws for outside measurement
500-732-20 0 – 8″ 198g
500-733-20 0 – 6″ 168g Carbide-tipped jaws for outside and inside measurement
500-734-20 0 – 8″ 198g
500-735-20 0 – 6″ 168g

 

 

 

Carbide-tipped jaws for outside measurement

500-736-20 0 – 8″ 198g
500-737-20 0 – 6″ 168g
500-738-20 0 – 8″ 198g

Carbide-tipped jaws for outside and inside

measurement

500-752-20 0 – 6″ 168g  
500-753-20 0 – 8″ 198g  
500-762-20 0 – 6″ 168g    
500-763-20 0 – 8″ 198g  
500-768-20 0 – 6″ 168g Depth bar ø1.9mm
500-769-20 0 – 6″ 168g   Depth bar ø1.9mm
500-764-10 0-12″

“±.0015″”/

±0.03mm”

350g      
500-754-10 350g  

* Not including quantizing error of ±1 count in LSD

 

DIMENSIONS

Smooth slider movement makes for comfortable operation.

Technical Data

Resolution: 0.01mm or .0005″/0.01mm
Repeatability: 0.01mm or .0005″/0.01mm
Quantizing error: Not including ±1 count
Dust/Water protection level: IP67 (IEC60529)*
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life: Approx. 5 years under normal use (1 year: 0 – 300mm/0 – 12″ models)
* Although these models are IP67 rated, care should be taken to dry tool after use.

Functions
Origin-set: Absolute origin position can be changed.
Data output: Measurement data output connector allows  integration into statistical process control and measurement systems.
Automatic power on/off: LCD display will turn off after 20 minutes inactivity, but the ABS scale unit origin is
stored. Power is restored when the slider is moved.
Alarm: Error message is displayed if error in calculation is found and measurement is stopped. Measurement
will not be continued while error is displayed. Also, if the battery voltage becomes low, “B” appears to alert the user before measurement is no longer possible.