• IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.)
  • The range of applications can be expanded by using interchangeable jaws (optional).
  • Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.
  • Provided with preset function for setting a desired starting point, which allows direct readout of offset measurement.

SPECIFICATIONS

Metric

Order No. Range Accuracy
552-181-10 0 – 450mm ±0.04mm
552-182-10 0 – 600mm
552-183-10 0 – 1000mm ±0.05mm
552-184-10 0 – 1500mm ±0.09mm
552-185-10 0 – 2000mm ±0.12mm

Inch/Metric

Order No. Range Accuracy
552-191-10 0 – 18″

 

±.002″

552-192-10 0 – 24″
552-193-10 0 – 40″
552-194-10 0 – 60″ ±.004″
552-195-10 0 – 80″ ±.005″

Optional accessories
Interchangeable jaws

SPECIFICATIONS
Standard Type

Order No. Components a b
07CZA056 Right (07CAA044), Left (07CAA045) 28mm (1.1″) 30mm (1.2″)

* 1 set

Inside Point Type

Order No. Components a b
07CZA058 07CZA041 x 2pcs. 25mm 50mm
07CZA059 07CZA048 x 2pcs. 1″ 2″

Scriber Type

Order No. Components a b
07CZA055 Right (07CZA042), Left (07CZA043) 8mm 30mm
07CZA061 Right (07CZA042), Left (07CZA049) 031″ 1.2″

Surface Plate Type

Order No. a b
07CZA044 90mm (3.5″) 28mm (1.1″)

Centerline Type

Order No. Components a b
07CZA057 07CZA039 x 2pcs. 30mm 30mm
07CZA060 07CZA047 x 2pcs. 1.2″ 1.2″

Note: Entering the appropriate offset value enables the display to indicate the correct measurement value inscribed on the jaws, which should be installed so that this inscription is visible from the display side of the caliper.
Scriber for height gages
Order No. 07GZA000

Type Applicable calipers Range Accuracy whenattached to the caliper

 

 

Standard type

552-181-10 (552-191-10) 0 – 450mm ( 0-18”) ±0.06mm ( ±.0025”)
552-182-10 (552-192-10) 0 – 600mm ( 0-24”)
552-183-10 (552-193-10) 0 – 1000mm ( 0-40”) ±0.07mm ( ±.0030”)
552-184-10 (552-194-10) 0 – 1500mm ( 0-60”) ±0.11mm( ±.0045”)
552-185-10 (552-195-10) 0 – 2000mm ( 0-80”) ±0.14mm ( ±.0055”)

 

 

 

 

Inside point type

552-181-10 (552-191-10) Inside: 50.1-500mm ( 2.004-20”)

 

±0.09mm( ±.0035”)

Outside: 0 – 450mm ( 0-18”)
552-182-10 (552-192-10) Inside: 50.1-650mm ( 2.004-26”)
Outside: 0 – 600mm( 0-24”)
552-183-10 (552-193-10) Inside: 50.1-1050mm ( 2.004-42”) ±0.10mm ( ±.0040”)
Outside: 0 – 1000mm ( 0-40”)
552-184-10 (552-194-10) Inside: 50.1-1550mm ( 2.004-62”) ±0.14mm ( ±.0055”)
Outside: 0 – 1500mm ( 0-60”)
552-185-10 (552-195-10) Inside: 50.1-2050mm( 2.004-82”) ±0.17mm ( ±.0070”)
Outside: 0 – 2000mm( 0-80”)

 

 

Centerline type

552-181-10 (552-191-10) 30.1 – 480mm ( 1.204-19.2”) ±0.08mm ( ±.0030”)
552-182-10 (552-192-10) 30.1 – 630mm ( 1.204-25.2”)
552-183-10 (552-193-10) 30.1 – 1030mmm ( 1.204-41.2”) ±0.09mm ( ±.0035”)
552-184-10 (552-194-10) 30.1 – 1530mm ( 1.204-61.2”) ±0.13mm( ±.0055”)
552-185-10 (552-195-10) 30.1 – 2030mm ( 1.204-81.2”) ±0.16mm ( ±.0065”)

 

 

Scriber type

552-181-10 (552-191-10) 30 – 480mm ( 1.2-19.2”) ±0.10mm ( ±.0040”)
552-182-10 (552-192-10) 30 – 630mm ( 1.2-25.2”)
552-183-10 (552-193-10) 30 – 1030mm ( 1.2-41.2”) ±0.11mm ( ±.0045”)
552-184-10 (552-194-10) 30 – 1530mm ( 1.2-61.2”) ±0.15mm ( ±.0060”)
552-185-10 (552-195-10) 30 – 2030mm ( 1.2-81.2”) ±0.18mm ( ±.0070”)
Surface plate 552-181-10 (552-191-10) 0 – 450mm ( 0-17.7”) ±0.10mm( ±.0040”)
552-182-10 (552-192-10) 0 – 600mm ( 0-23.7”)
type
552-183-10 (552-193-10) 0 – 1000mm ( 0-39.4”) ±0.11mm ( ±.0045”)
+
Scriber type for
552-184-10 (552-194-10) 0 – 1500mm ( 0-59.4”) ±0.15mm ( ±.0060”)
height gages
552-185-10 (552-195-10) 0 – 2000mm ( 0-79.6”) ±0.18mm ( ±.0070”)
  552-181-10 (552-191-10) Inside: 25.1 – 475mm ( 1.004-19″)  
  Outside: 0 – 450mm ( 1-18”) ±0.12mm ( ±.0050”)
552-182-10 (552-192-10) Inside: 25.1 – 625mm ( 1.004-25″)
Surface plate Outside: 0 – 600mm ( 1-24”)  
552-183-10 (552-193-10) Inside: 25.1 – 1025mm ( 1.004-41″) ±0.13mm ( ±.0055”)
type
+ Outside: 0 – 1000mm ( 1-40”)
Inside point type
552-184-10 (552-194-10) Inside: 25.1 – 1525mm ( 1.004-62″) ±0.17mm ( ±.0070”)
  Outside: 0 – 1500mm ( 1-60”)
552-185-10 (552-195-10) Inside: 25.1 – 2025mm ( 1.004-81″) ±0.20mm ( ±.0080”)
Outside: 0 – 2000mm ( 1-80”)
  552-181-10 (552-191-10) 15 – 465mm ( 0.6-18.6”) ±0.11mm ( ±.0045”)
Surface plate 552-182-10 (552-192-10) 15 – 615mm ( 0.6-24.6”)
type
552-183-10 (552-193-10) 15 – 1015mm ( 0.6-40.6”) ±0.12mm ( ±.0050”)
+
552-184-10 (552-194-10) 15 – 1515mm ( 0.6-60.6”) ±0.16mm ( ±.0065”)
Centerline type
  552-185-10 (552-195-10) 15 – 2015mm ( 0.6-80.6”) ±0.19mm ( ±.0075”)

Application examples

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)

Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life: Approx. 5,000 hours in continuous use
Dust/Water protection level: IP66 (IEC 60529)* Standard accessory: Jaw clamps (2 pcs.), 05GZA033
* Although these models are IP66 rated, care should be taken to dry tool after use.

Functions
Zero-setting

Data hold
Offsetting
Presetting
Data output
Low-power and low-voltage alert
Counting value composition error
Automatic power on/off, inch/mm reading (inch/mm models)

Standard accessories (2 pcs)

 

Jaw clamps: No.05GZA033 

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)

05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)

Connecting  cables  for  U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button(160mm)

02AZE140A: SPC cable for footswitch