• Specially designed for inside measurements in hard-to-reach places.
  • Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)
  • Allows integration into statistical process control and measurement systems for models with measurement data output connector.
    Refer to page A-3.

SPECIFICATIONS

Metric Digital model

Order No. Range Accuracy Remarks
573-642 10 – 200mm ±0.05mm Knife-edge type, Measurable min. hole diameter: ø10mm
573-643* 10 – 200mm ±0.05mm Knife-edge type, Measurable min. hole diameter: ø10mm
573-645** 10.1 – 160mm ±0.05mm Inside groove type, Measurable min. hole diameter: ø10.1mm
573-647* 10.1 – 160mm ±0.05mm Inside groove type, Measurable min. hole diameter: ø10.1mm
573-646** 20.1 – 170mm ±0.03mm Point jaw type, Measurable min. hole diameter: ø20.1mm
573-648* 20.1 – 170mm ±0.03mm Point jaw type, Measurable min. hole diameter: ø20.1mm

* without thumb roller
** Incorporated with the offsetting function, which indicates the actual measurement value.

Inch/Metric Digital model

Order No. Range Accuracy Remarks
573-742 .4 – 6″ ±.002″ Knife-edge type, Measurable min. hole diameter: ø.4″
573-745** .404 – 6″ ±.002″ Inside groove type, Measurable min. hole diameter: ø.404″
573-746** .804 – 6″ ±.0015″ Point jaw type, Measurable min. hole diameter: ø.804″

** Incorporated with the offsetting function, which indicates the actual measurement value.

Metric

Order No. Range Accuracy Remarks
536-142 10 – 200mm ±0.12mm Knife-edge type, Measurable min. hole diameter: ø10.1mm
536-145 10.1 – 150mm ±0.05mm Inside groove type, Measurable min. hole diameter: ø10.1mm
536-146 20.1 – 150mm ±0.05mm Point jaw type, Measurable min. hole diameter: ø20.1mm
536-147 30.1 – 300mm ±0.08mm Point jaw type, Measurable min. hole diameter: ø30.1mm
536-148 70.1 – 450mm ±0.10mm Point jaw type, Measurable min. hole diameter: ø70.1mm
536-149 70.1 – 600mm ±0.12mm Point jaw type, Measurable min. hole diameter: ø70.1mm

DIMENSIONS

Range c d e f g H L
150mm 38 31 5 5 2 16 229
300mm 98 89 5 10 2 20 403
450mm 145 136 10 25 5 25 610
600mm 145 136 10 25 5 25 750

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)

Resolution*: 0.01mm or .00005″/0.01mm Graduation**: 0.05mm
Display*: LCD
Scale type*: ABSOLUTE electromagnetic induction linear encoder
Max. response speed*: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life*: Approx. 3 years under normal use Dust/Water protection level*: IP67 (IEC 60529)***
* Digital models ** Analog models *** This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX

05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)

Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)

02AZE140A: SPC cable for footswitch