- Non-rotating spindle type which accepts seven forms of optional interchangeable anvil / spindle tip (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications.
- Equipped with Ratchet Stop for constant measuring force.
- Optional anvils / spindle tips for screw thread measurement (matching V and cone) are also available.
SPECIFICATIONS
Metric
| Order No. | Range | Graduation | Accuracy |
|---|---|---|---|
| 116-101 | 0 – 25mm |
0.01mm |
±4µm |
| 116-102 | 25 – 50mm |
* 116-102 is provided with a plain setting standard (167-101)and a 60°-thread setting standard (167-261) for adjusting the minimum range point according to the application.
* 116-106 is provided with a plain setting standard (167-141) and a 60°-thread setting standard (167-294) for adjusting the minimum range point according to the application.
Inch
|
Order No. |
Range |
Graduation |
Accuracy |
|---|---|---|---|
| 116-105 | 0 – 1″ |
.001″ |
±.0002″ |
| 116-106 | 1″ – 2″ |
* 116-106 is provided with a plain setting standard (167-141) and a 60°-thread setting standard (167-294) for adjusting the minimum range point according to the application.
Optional accessories
Interchangeable anvils / spindle tips are available in matching pairs.
| Order No. | Description |
|---|---|
| 116-801 | Flat |
| 116-802 | Spline |
| 116-803 | Spherical |
| 116-804 | Point |
| 116-805 | Knife-edge |
| 116-806 | Disk |
| 116-807 | Blade |
|
116-800 116-801 – 116-807 Set Anvils / spindle tips set (7 pairs) |
|
Thread-measuring interchangeable contact points are available in matching pairs.
| Order No. | Set Identifier Range of measurement (mm) |
|---|---|
| 116-831 | 0.4 – 0.5mm/64 – 48TPI |
| 116-832 | 0.6 – 0.9mm/44 – 28TPI |
| 116-833 | 1 – 1.75mm/24 – 14TPI |
| 116-834 | 2 – 3mm/13 – 9TPI |
| 116-835 | 3.5 – 5mm/8 – 5TPI |
| 116-836 | 5.5 – 7mm/4.5 – 3.5TPI |
| 116-830 116-831 – 116-836 M (U) Set | |
Interchangeable contact points (optional)
Technical Data
Standard accessories: Spanner (301336), 1 pc