Site icon Gokul Traders

ROTATIONAL FRICTION TORQUE

NTS-6 Motorized Rotational Friction Torque Tester

Motorized Rotational Friction Torque Tester
Series: NTS-6

Ranges
NTS-6 Ranges
Accuracy: ±1% F.S., ±1LSD
Note: oz models do not have selectable units
Model     Capacity     Max Speed (no-load) Bit Size
  ozf-in lbf-in Kgf-cm mN-m N-m rpm  
NTS-6-S1oz 0.30 ~14.00 85 4mm
NTS-6-S2oz 0.30 ~ 28.00 25 4mm
NTS-6-S5oz 3.0 ~ 70.0 13 4mm
NTS-6-S1 0.030 ~ 0.900 0.030 ~ 1.000 3.0 ~ 100.0 85 4mm
NTS-6-S2 0.030 ~ 1.740 0.030 ~ 2.000 3.0 ~200.0 25 4mm
NTS-6-S5 0.30 ~ 4.50 0.30 ~ 5.00 0.030 ~ 0.500 13 4mm
NTS-6-S10 0.30 ~ 9.00 0.30 ~ 10.00 0.030 ~ 1.000 18 6.35mm HEX
NTS-6-S20 0.30 ~ 17.40 0.30 ~ 20.00 0.030 ~ 2.000 18 6.35mm HEX
NTS-6-S50 0.30 ~ 45.00 0.30 ~ 50.00 0.030 ~ 5.000 5 12mm

 

Standard Features
NTS-6 Standard Features

 

Specifications
NTS-6 Specifications
Model S1/1oz S2/2oz S5/5oz S10 S20 S50
Max. Speed (no-load) 85rpm 25rpm 13rpm 18rpm 18rpm 5rpm
Dimensions (detector) 28mm dia. × 155mm 37mm dia. × 195mm 40mm dia. x 235mm 55mm dia. x 285mm
Bit size 4mm dia. 4mm dia. 6.35mm HEX 12mm dia.
Display
4 digit LCD display
Operation
Both CW and CCW motorized rotation
Measuring modes
PP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.
GO: Real Time Mode displays TRANSIENT torque values. RG: Output Torque Data every 1/100 seconds.
Measurement start time
Can be set up to 1 second in 0.1 second increments.
Measuring time
Time can be programmed between 1 and 20 seconds.
Go/No go testing
Programmable High and Low values; Green lamp (OK solid, NG blinking).
External input/output
Signal output (open collector): Go and No Go Data output: RS-232C (9600 baud) External start switch input
Power supply
AC100V~240V
Dimensions (indicator)
165mm W × 110mm D × 58mm H

 

Exit mobile version