Digital torque wrenches capture peak torque or display torque measurement in real time mode. High and low setpoints with LED indicator and audible alarm facilitate Go/No Go testing.
GEK series torque wrenches are accurate to 1.5% F.S., ±1 LSD and are powered by a coin battery. DIW torque wrench/testers are accurate to 0.5% F.S., ±1 LSD, output peak or continuous data and have a rechargeable NiCad battery. (torque = force x distance)

Splashproof Digital Torque Wrenches

GEK-A Series

digital torque wrenches-gek-a-cover

Standard Features
  • Splashproof protective covers* allow operation and comply with IPX4
  • Rugged, precision forged construction
  • Five programmable Go/No Go torque presets ideal for frequent operations.
  • Selectable Units: lbf-in, lbf-ft, kgf-cm, N-m
  • Peak, peak with auto zero reset and Real Time modes
  • High accuracy ±1.5% F.S. both CW and CCW directions
  • Battery-Operated (Panasonic CR2354)
  • ISO-6789 Compliant
  • Calibration certificate traceable to NIST and carrying case included

 

Ranges
Splashproof Digital Ratchet Torque Wrench Ranges
Accuracy: ±1.5% F.S. ±1 LSD
Model Capacity
  lbf-in lbf-ft kgf-m N-m Drive
GEK030-R2E-A 13.4~265.4 1.12~22.12 0.160~3.060 1.50~30.00 1/4″
GEK030-C3E-A 13.4~265.4 1.12~22.12 0.160~3.060 1.50~30.00 3/8″
GEK060-R3E-A 13.5~531.0 1.15~44.25 0.160~6.120 1.50~60.00 3/8″
GEK085-R3E-A 19.0~752.0 1.60~62.70 0.21~8.66 2.0~85.0 3/8″
GEK135-R4E-A 28~1195 2.3~99.5 0.32~13.76 3.1~135.0 1/2″
GEK200-R4E-A 46~1770 3.8~147.4 0.55~20.40 5.2~200.0 1/2″

 

Splashproof Digital Adjustable Torque Wrench Ranges
Accuracy: ±1.5% F.S. ±1 LSD
Model Capacity
  lbf-in lbf-ft kgf-m N-m
GEK085-W36E-A 19.0~752.0 1.60~62.70 0.21~8.66 2.0~85.0
GEK135-W36E-A 28~1195 2.3~99.5 0.32~13.76 3.1~135.0
GEK200-W36E-A 46~1770 3.8~147.4 0.55~20.40 5.2~200.0

 

DIW Digital Torque Wrench

Lightweight Digital Torque Tester / Wrench DIW Series

digital torque wrenches-diw-15

Ranges
DIW Digital Torque Wrench Ranges
Accuracy ± 0.5% F.S., ±1 LSD
Model     Capacity     Drive Size
  lbf-in lbf-ft kgf-cm N-cm N-m  
DIW-15 2.0~130.0 – 2.0~150.0 20~1500 0.20~15.00 1/4″
DIW-20 2.0~174.0 – 2.0~200.0 20~2000 0.20~20.00 3/8″
DIW-75 2.0~651.0 – 2.0~750.0 20~7500 0.20~75.00 3/8″
DIW-120 20~1040 2.0~87.0 20~1200 – 2.0~120.0 1/2″

 

Standard Features of digital torque wrenches
DIW Standard Features
  • Drive-Centered Torque Sensor apply load anywhere on the tester,
    not just the load point, and achieve consistent results
  • Rechargeable internal NiMH batteries (8 hour use) and AC Adapter
  • Ultra Accurate ± 0.5% F.S., ±1 LSD
  • 300° Rotating Head adjusts viewing angle
  • 800 Data Memory recall data on the display or download
  • Output Data USB virtual COM port sends peak
    (1 data) or continuous data (12 or 180 data/second)
  • Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
  • Peak, Real Time, Peak Down and Continuous Output modes (selectable)
  • Selectable units lbf-in, kgf-cm, N-cm and N-m
  • USB Virtual COM port
  • Statistics: number of data, Max, Min, Avg
  • Programmable screw tightening counter
  • Programmable Auto Zero function resets unit to zero for easy operation
  • Ergonomic and light weight, yet ruggedly constructed
  • CW and CCW operation
  • CW stepless one-way clutch adapter, AC charger and carrying case included.

 

Optional Quick Spinners and Adapters

Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.

BE2-Q 1/4″ to 1/4″ Quick Spinner

BE3-Q 3/8″ to 3/8″ Quick Spinner

BE4-Q 1/2″ to 1/2″ Quick Spinner

Spinner/Converters have a lower profile than conventional adapters.

BAE23 converts 1/4″ to 3/8″ drive
BAE34 converts 3/8″ to 1/2″ drive

 

GEK Digital Adjustable Torque Wrench

gek085-w36e

Ranges
GEK Digital Adjustable Torque Wrench Ranges
Accuracy: ±1.5% F.S. ±1 LSD
Model Capacity      
  lbf-in lbf-ft kgf-m N-m
GEK085-W36E 19.0~752.0 1.60~62.70 0.21~8.66 2.0~85.0
GEK135-W36E 28~1195 2.3~99.5 0.32~13.76 3.1~135.0
GEK200-W36E 46~1770 3.8~147.4 0.55~20.40 5.2~200.0

 

Specifications
Accuracy ±1.5% F.S.
Measuring direction CW with display facing you, CCW with display facing away from you
Measuring unit Selectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory 5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFF Power automatically turns off after 2 minutes of non-use
Battery Lithium coin battery CR2354
Battery Life Approx. 2 months (100 usages per day)

 

Standard Features
GEK Series Standard Features
  • High accuracy ±1.5% F.S. (clockwise with display facing you, counterclockwise with display facing away from you)
  • The best known, rugged, high quality tools for over 60 years!
  • Peak, peak with auto zero reset and Real Time modes
  • Five programmable torque presets ideal for frequent operations.
  • Pass/Fail mode counts fasteners tightened within programmed High/Low limits, using LED and audible alerts
  • Selectable units, lbf-in, lbf-ft, kgf-cm, N-m
  • ISO-6789 Compliant
  • Calibration cert traceable to NIST and carrying case included
Optional Protective Cover

Model GEK-A, complies with IPX4, allows operation and protects the wrench from splashes in production environments.

 

GEK Digital Ratchet Torque Wrench

gek-ratchet

Ranges
Model No. lbf-in lbf-ft kgf-m N-m Drive
GEK030-R2E 13.4~265.4 1.12~22.12 0.160~3.060 1.50~30.00 1/4″
GEK030-C3E 13.4~265.4 1.12~22.12 0.160~3.060 1.50~30.00 3/8″
GEK060-R3E 13.5~531.0 1.15~44.25 0.160~6.120 1.50~60.00 3/8″
GEK085-R3E 19.0~752.0 1.60~62.70 0.21~8.66 2.0~85.0 3/8″
GEK135-R4E 28~1195 2.3~99.5 0.32~13.76 3.1~135.0 1/2″
GEK200-R4E 46~1770 3.8~147.4 0.55~20.40 5.2~200.0 1/2″
Specifications
Accuracy ±1.5% F.S.
Measuring direction CW and CCW
Measuring unit Selectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory 5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFF Power automatically turns off after 2 minutes of non-use
Battery Lithium coin battery CR2354
Battery Life Approx. 2 months (100 usages per day)
Standard Features
GEK Series Standard Features
  • High accuracy ±1.5% F.S. both CW and CCW directions
  • The best known, rugged, high quality tools for over 60 years!
  • Peak, peak with auto zero reset and Real Time modes
  • Five programmable torque presets ideal for frequent operations.
  • Pass/Fail mode counts fasteners tightened within programmed High/Low limits, using LED and audible alerts
  • Selectable units, lbf-in, lbf-ft, kgf-cm, N-m
  • ISO-6789 Compliant
  • Calibration certificate traceable to NIST and carrying case included
Optional Quick Spinners, Adapters & Protective Cover
Optional Quick Spinner and Spinner/Converters

Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.

BE2-Q 1/4″ to 1/4″ Quick Spinner
BE3-Q 3/8″ to 3/8″ Quick Spinner
BE4-Q 1/2″ to 1/2″ Quick Spinner

Spinner/Converters have a lower profile than conventional adapters.

BAE23 converts 1/4″ to 3/8″ drive
BAE34 converts 3/8″ to 1/2″ drive

Optional Protective Cover

Model GEK-A, complies with IPX4, allows operation and protects the wrench from splashes in production environments.