Digital torque screwdriver/testers capture peak torque or display torque measurement in real time mode. High and low setpoints with LED indicator and audible alarm facilitate Go/No Go testing. Perform breakaway tests.
GLK series torque screwdrivers are accurate to 1.5% F.S., ±1 LSD and are powered by a coin battery.
DID torque screwdriver/testers are accurate to 0.5% F.S., ±1 LSD, output peak or continuous data and have a rechargeable NiCad battery. (torque = force x distance)

GLK Digital Torque Screwdrivers

Series GLK Digital Torque Screwdrivers
60, 250, 500 cN-m capacities

digital torque screwdrivers-ktc-glk-digital-torque-screwdrivers

Ranges
GLK Digital Torque Screwdriver Ranges
Accuracy ± 1.5% F.S., ±1 LSD
Model No. ozf-in lbf-in cN-m
GLK060E 0.9~85.0 0.05~5.31 0.60~60.00
GLK250E 3.5~354.0 0.22~22.13 2.5~250.0
GLK500E 7.1~708.0 0.44~44.25 5.0~500.0
Specifications
Accuracy ±1.5% F.S.
Measuring direction CW with display facing you, CCW with display facing away from you
Measuring unit Selectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory 5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFF Power automatically turns off after 2 minutes of non-use
Battery Lithium coin battery CR2354
Battery Life Approx. 2 months (100 usages per day)
Standard Features
  • Rugged, high quality production tools
  • High accuracy ±1.5% F.S. both CW and CCW directions
  • Selectable units, ozf-in, lbf-in, cN-m
  • Peak, peak with auto zero reset and Real Time modes
  • Five programmable torque presets ideal for frequent operations.
  • Pass/Fail mode counts fasteners tightened within programmed
    High/Low limits, using LED and audible alerts
  • ISO-6789 Compliant
  • Kit includes screwdriver with 1/4″ square drive, 1/4″ square drive to 1/4″ hex magnetic
    adapter,  Phillips tip, battery, carrying case and calibration certificate traceable to NIST
  • Optional ratchet (RA2) with 1/4″ square drive, CW, CCW and fixed
    operation is available

 

DID-4 Digital Torque Screwdriver

Series DID Digital Torque Screwdriver / Torque Tester
Model – DID-4A Digital Torque Screwdriver
Model – DID-05 Digital Torque Screwdriver

digital torque screwdrivers-did-4a-05

Ranges
Accuracy ± 0.5% F.S., ±1 LSD
Model     Capacity    
  ozf-in lbf-in kgf-cm N-cm N-m
DID-05 0.20~69.50 0.020~4.500 0.020~5.000 0.20~50.00 —
DID-4A 2.0~560.0 0.20~35.00 0.20~40.00 2.0~400.0 0.020~4.000
Standard Features
DID Series Standard Features
  • Runs on internal batteries (8 hour use) Auto shut-off after 10 min. of non-use
  • Programmable High/Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
  • Peak, Real Time, Peak Down and Continuous Output modes (selectable)
  • Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
  • USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
  • Statistics: number of data, Max, Min, Avg
  • 800 data memory for recall or for SPC download
  • Programmable screw tightening counter
  • Programmable Auto Zero function resets unit to zero for easy operation
  • Ergonomic and light weight, yet ruggedly constructed
  • DID-05 includes 4mm stepless one-way clutch, 4mm locking half round Phillips tip, full round Phillips tip, AC charger and carrying case
  • DID-4A includes 2-1/4″ Phillips tips, AC charger and carrying case