BAKER MASTER SETTING DISC

Baker Gauges

8 years ago

Master setting disc used for setting of measuring instruments like horizontal comparators, length measuring machines for OD checking.
Made from oil hardened non shrinking gauge steel, hardened and tempered to 60-62 HRC
Sub-zero treated at -80 °C for long term dimensional stability
Actual dimensions duly etched
Calibrated at 20 °C under standards room conditions against national/international traceable standards
Certificate of calibration is provided along with each master traceable to national/international standards
Certificate under NABL (as per ISO 17025) as per request
Manufactured as per ASME B47.1 (blank design) & ASME B89.1.5 (for form tolerance class X , size tolerance class Y & surface finish class XXX)

ØD ABOVE	ØD UPTO & INC.	A	C	R	ØS
3.0	3.81	9.52	17.46	11.1	2.4
3.81	5.84	11.11	19.05	11.1	3.2
5.84	9.27	12.7	20.64	11.1	5.6

ØD ABOVE	ØD UPTO & INC.	A	C	R	ØS
9.27	12.95	14.29	22.22	12.7	8.7
12.95	20.96	15.88	23.81	12.7	12.7
20.96	28.83	17.46	25.4	15.9	19
28.83	38.35	20.64	28.58	15.9	25.4

ØD ABOVE	ØD UPTO & INC.	B	ØA	L
38.35	51.05	22.2	31.8	15.8
51.05	63.75	22.2	31.8	15.8
63.75	76.45	25.4	38.1	39.8
76.45	89.15	25.4	38.1	39.8
89.15	101.85	25.4	38.1	39.8
101.85	114.55	25.4	38.1	39.8
114.55	127.25	25.4	38.1	39.8
127.25	139.95	25.4	38.1	39.8
139.95	152.65	25.4	38.1	39.8
152.65	165.35	25.4	38.1	39.8
165.35	178.05	25.4	38.1	39.8
178.05	190.75	25.4	38.1	39.8
190.75	200.00	25.4	38.1	39.8