Digital torque screwdriver/testers capture peak torque or display torque measurement in real time mode. High and low setpoints with LED indicator and audible alarm facilitate Go/No Go testing. Perform breakaway tests.
GLK series torque screwdrivers are accurate to 1.5% F.S., ±1 LSD and are powered by a coin battery.
DID torque screwdriver/testers are accurate to 0.5% F.S., ±1 LSD, output peak or continuous data and have a rechargeable NiCad battery. (torque = force x distance)
GLK Digital Torque Screwdrivers
Series GLK Digital Torque Screwdrivers
60, 250, 500 cN-m capacities
Ranges
GLK Digital Torque Screwdriver Ranges
Accuracy ± 1.5% F.S., ±1 LSD
Model No. |
ozf-in |
lbf-in |
cN-m |
GLK060E |
0.9~85.0 |
0.05~5.31 |
0.60~60.00 |
GLK250E |
3.5~354.0 |
0.22~22.13 |
2.5~250.0 |
GLK500E |
7.1~708.0 |
0.44~44.25 |
5.0~500.0 |
Specifications
Accuracy |
±1.5% F.S. |
Measuring direction |
CW with display facing you, CCW with display facing away from you |
Measuring unit |
Selectable lbf-in, lbf-ft, kgf-m, N-m |
Data Memory |
5 (storable Target torque values), 1 (Pass/Fail Mode) |
Auto Shut OFF |
Power automatically turns off after 2 minutes of non-use |
Battery |
Lithium coin battery CR2354 |
Battery Life |
Approx. 2 months (100 usages per day) |
Standard Features
- Rugged, high quality production tools
- High accuracy ±1.5% F.S. both CW and CCW directions
- Selectable units, ozf-in, lbf-in, cN-m
- Peak, peak with auto zero reset and Real Time modes
- Five programmable torque presets ideal for frequent operations.
- Pass/Fail mode counts fasteners tightened within programmed
High/Low limits, using LED and audible alerts
- ISO-6789 Compliant
- Kit includes screwdriver with 1/4″ square drive, 1/4″ square drive to 1/4″ hex magnetic
adapter, Phillips tip, battery, carrying case and calibration certificate traceable to NIST
- Optional ratchet (RA2) with 1/4″ square drive, CW, CCW and fixed
operation is available
DID-4 Digital Torque Screwdriver
Series DID Digital Torque Screwdriver / Torque Tester
Model – DID-4A Digital Torque Screwdriver
Model – DID-05 Digital Torque Screwdriver
Ranges
Accuracy ± 0.5% F.S., ±1 LSD
Model |
|
|
Capacity |
|
|
|
ozf-in |
lbf-in |
kgf-cm |
N-cm |
N-m |
DID-05 |
0.20~69.50 |
0.020~4.500 |
0.020~5.000 |
0.20~50.00 |
|
DID-4A |
2.0~560.0 |
0.20~35.00 |
0.20~40.00 |
2.0~400.0 |
0.020~4.000 |
Standard Features
DID Series Standard Features
- Runs on internal batteries (8 hour use) Auto shut-off after 10 min. of non-use
- Programmable High/Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
- Peak, Real Time, Peak Down and Continuous Output modes (selectable)
- Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
- USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- Statistics: number of data, Max, Min, Avg
- 800 data memory for recall or for SPC download
- Programmable screw tightening counter
- Programmable Auto Zero function resets unit to zero for easy operation
- Ergonomic and light weight, yet ruggedly constructed
- DID-05 includes 4mm stepless one-way clutch, 4mm locking half round Phillips tip, full round Phillips tip, AC charger and carrying case
- DID-4A includes 2-1/4″ Phillips tips, AC charger and carrying case