TAPARIA® Offer the most comprehensive range of screw drivers:-
• Made out of High Grade Steel and Transparent green cellulose acetate handle.
• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.
• It is available in wide variety of different tip size & length.
• It is Generally Conforming to IS 844-1979
FLAT SCREW DRIVERS
The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.
| PROD.NO | TIP SIZE B x T | A | C | D | L | WT.GMS |
| 932 | 0.6 x 0.4 | 50 | 13 | 3.0 | 110 | 10 |
| 933 | 1.6 x 0.4 | 75 | 13 | 3.0 | 135 | 12 |
| 911 | 3.0 x 0.4 | 50 | 13 | 3.0 | 110 | 10 |
| 901 | 3.0 x 0.5 | 75 | 17 | 3.0 | 150 | 21 |
| 902 | 3.0 x 0.4 | 100 | 17 | 3.0 | 175 | 22 |
| 912 | 3.5 x 0.5 | 75 | 14 | 3.5 | 140 | 16 |
| 842 | 3.5 x 0.5 | 150 | 17 | 3.5 | 225 | 35 |
| 913 | 4.0 x 0.6 | 100 | 18 | 4.0 | 18 | 30 |
| 712 | 4.0 x 0.6 | 125 | 17 | 4.0 | 200 | 30 |
| 833 | 4.0 x 0.6 | 200 | 18 | 4.0 | 280 | 40 |
| 713 | 5.0 x 0.6 | 75 | 18 | 5.0 | 155 | 35 |
| 936 | 5.0 x 0.8 | 150 | 22 | 5.0 | 236 | 60 |
| 921 | 6.0 x 0.6 | 75 | 22 | 6.0 | 161 | 55 |
| 922 | 6.0 x 6.0 | 100 | 22 | 6.0 | 186 | 60 |
| 923 | 6.0 x 0.8 | 125 | 22 | 6.0 | 211 | 62 |
| 824 | 6.0 x 0.8 | 150 | 22 | 6.0 | 236 | 65 |
| 825 | 6.0 x 0.8 | 200 | 22 | 6.0 | 286 | 77 |
| 826 | 6.0 x 0.8 | 250 | 22 | 6.0 | 336 | 90 |
| 924 | 8.0 x 1.2 | 125 | 28 | 8.0 | 230 | 115 |
| 925 | 8.0 x 1.2 | 150 | 28 | 8.0 | 255 | 130 |
| 926 | 8.0 x 1.2 | 175 | 28 | 8.0 | 280 | 130 |
| 827 | 8.0 x 1.2 | 200 | 28 | 8.0 | 305 | 145 |
| 828 | 8.0 x 1.2 | 250 | 28 | 8.0 | 355 | 165 |
| 829 | 8.0 x 1.2 | 300 | 28 | 8.0 | 405 | 180 |
| 725 | 10.0 x 1.2 | 150 | 26 | 8.0 | 248 | 120 |
| 927 | 10.0 x 1.2 | 200 | 34 | 10.0 | 327 | 245 |
| 928 | 10.0 x 1.2 | 250 | 34 | 10.0 | 377 | 275 |
| 929 | 10.0 x 1.5 | 300 | 34 | 10.0 | 427 | 310 |
| 930 | 10.0 X 1.5 | 400 | 34 | 10.0 | 527 | 365 |
| 931 | 13.0 x 1.9 | 450 | 34 | 10.0 | 577 | 395 |
INSULATED SCREW DRIVERS
| PROD.NO | TIP SIZE B x T | A | C | D | L | WT.GMS |
| 822 I | 3.5 x 0.5 | 125 | 17 | 3.5 | 200 | 30 |
| 842 I | 3.5 x 0.5 | 150 | 17 | 3.5 | 225 | 35 |
| 832 I | 3.5 x 0.5 | 200 | 17 | 3.5 | 275 | 40 |
| 823 I | 3.4 x 0.6 | 150 | 18 | 4.0 | 230 | 40 |
| 833 I | 4.0 x 0.6 | 200 | 18 | 4.0 | 280 | 40 |
| 934 I | 5.0 x 0.6 | 100 | 22 | 5.0 | 186 | 50 |
| 935 I | 5.0 x 0.6 | 125 | 22 | 5.0 | 211 | 55 |
| 936 I | 5.0 x 0.8 | 150 | 22 | 5.0 | 236 | 60 |
| 937 I | 5.5 x 0.6 | 200 | 22 | 5.0 | 286 | 70 |
| 938 I | 5.0 x 0.8 | 250 | 22 | 5.0 | 336 | 80 |
| 939 I | 5.0 x 0.8 | 300 | 22 | 5.0 | 386 | 90 |
| 824 I | 6.0 x 0.8 | 150 | 22 | 6.0 | 236 | 65 |
| 825 I | 6.0 x 0.8 | 200 | 22 | 6.0 | 286 | 77 |
| 826 I | 6.0 x 0.8 | 250 | 22 | 6.0 | 336 | 90 |
| 827 I | 8.0 x 1.2 | 200 | 28 | 8.0 | 305 | 145 |
| 829 I | 8.0 x 1.2 | 300 | 28 | 8.0 | 405 | 180 |
| 928 I | 10.0 x 1.2 | 250 | 34 | 10.0 | 377 | 275 |
PHILIPS SCREW DRIVERS
| PROD.NO | TIP SIZE B x T | A | C | D | L | WT.GMS |
| P3 859 50 | 0 | 50 | 13 | 3 | 108 | 15 |
| P3 860 60 | 0 | 60 | 17 | 3 | 135 | 20 |
| P3 860 150 | 0 | 150 | 17 | 3 | 225 | 25 |
| P5 861 75 | 1 | 75 | 22 | 3 | 160 | 50 |
| P5 861 100 | 1 | 100 | 22 | 5 | 185 | 55 |
| P5 861 150 | 1 | 150 | 22 | 5 | 235 | 60 |
| P5 861 200 | 1 | 200 | 22 | 5 | 285 | 65 |
| P6 862 100 | 2 | 100 | 22 | 6 | 198 | 80 |
| P6 862 150 | 2 | 150 | 26 | 6 | 248 | 95 |
| P6 862 200 | 2 | 200 | 26 | 6 | 298 | 110 |
| P6 862 250 | 2 | 250 | 26 | 6 | 348 | 125 |
| P6 862 300 | 2 | 300 | 26 | 6 | 398 | 140 |
| P8 863 150 | 3 | 150 | 28 | 8 | 255 | 155 |
| P8 863 200 | 3 | 200 | 28 | 8 | 305 | 175 |
| P8 863 250 | 3 | 250 | 28 | 8 | 355 | 195 |
| P8 863 300 | 3 | 300 | 28 | 8 | 405 | 215 |
| P1 864 200 | 4 | 200 | 34 | 10 | 327 | 250 |
STUBBY SCREW DRIVERS
| PROD.NO | TIP SIZE B x T | A | C | D | L | WT.GMS |
| 855 | 6.0 PHILIPS NO. 2 | 50 | 30 | 6 | 100 | 45 |
TWO-IN-ONE STUBBY SCREW DRIVERS
| PROD.NO | A | C | D | L | TIP SIZE D1 x T1 |
TIP SIZE D2 x T1 |
L1 | WT. GMS |
| 974 | 95 | 22 | 6 | 180 | 6.0 x 0.8 | 6.0 x 2 PHILIPS | 75 | 55 |
TWO-IN-ONE SCREW DRIVERS
| PROD.NO | A | C | L | TIP SIZE D1 x T1 |
TIP SIZE D2 x T1 |
L1 | WT. GMS |
| 803 | 55 | 17 | 130 | 3.5 x 0.5 | 3.5 x 0 PHILIPS | 122 | 25 |
| 804 | 75 | 18 | 155 | 5.0 x 0.8 | 5.0 x 1 PHILIPS | 122 | 40 |
| 810 | 60 | 14 | 125 | 2.3 x 0.4 | 25 x 00 PHILIPS | 110 | 20 |
| 850 | 200 | 22 | 284 | 3.5 x 0 PHILIPS | 5.0 x 1 PHILIPS | 250 | 80 |
| 851 | 200 | 25 | 396 | 5.0 X 1 PHILIPS | 6.0 x 2 PHILIPS | 250 | 105 |
| 852 | 200 | 27 | 313 | 6.0 x 2 PHILIPS | 8.0 x 3 PHILIPS | 255 | 170 |
| 903 I | 250 | 23 | 342 | 6.0 x 0.8 | 2.5 x 00 PHILIPS | 300 | 100 |
| 904 | 100 | 23 | 192 | 6.0 X 0.7 | 50 X 1 PHILIPS | 150 | 60 |
| 905 | 140 | 23 | 232 | 6.0 X 0.8 | 6.0 X 2 PHILIPS | 190 | 70 |
| 906 | 140 | 27 | 245 | 8.0 X 0.9 | 8.0 X 3 PHILIPS | 205 | 115 |
| 907 | 200 | 23 | 292 | 6.0 X 0.8 | 6.0 X 2 PHILIPS | 250 | 95 |
TORX SCREW DRIVERS
The blade is made from high grade silicon manganese steel. It is full hardened & tempered withstand high torque requirements and magnetized to lift screws etc. from confined spares or to hold screw in position. It is also effectively protected against corrosion by Nickel Chrome plating.
| PROD. NO. | A | C | D | L | WT.GMS |
| T – 5 | 75 | 17 | 3.0 | 140 | 22 |
| T – 5L | 150 | 17 | 3.0 | 215 | 28 |
| T – 6 | 75 | 17 | 3.0 | 150 | 22 |
| T – 6L | 150 | 17 | 3.0 | 225 | 28 |
| T – 8 | 75 | 17 | 3.5 | 150 | 25 |
| T – 8L | 150 | 17 | 3.5 | 225 | 35 |
| T – 10 | 75 | 17 | 3.5 | 150 | 25 |
| T – 10L | 150 | 17 | 3.5 | 225 | 35 |
| T – 15 | 75 | 22 | 5.0 | 161 | 50 |
| T – 15L | 150 | 22 | 5.0 | 236 | 60 |
| T – 20 | 100 | 22 | 5.0 | 186 | 55 |
| T – 20L | 200 | 22 | 5.0 | 286 | 65 |
| T – 25 | 100 | 26 | 6.0 | 198 | 90 |
| T – 25 L | 200 | 26 | 6.0 | 298 | 105 |
| T – 30 | 100 | 26 | 6.0 | 198 | 90 |
| T – 30 L | 200 | 26 | 6.0 | 298 | 105 |
| T – 40 | 125 | 28 | 8.0 | 230 | 120 |
| T – 40 L | 200 | 28 | 8.0 | 305 | 150 |
STRIKING SCREW DRIVERS
| PROD. NO. | A | C | D | L | WT.GMS |
| OGS 8210 | 75 | 17 | 3.0 | 140 | 22 |
| OGS 8260 | 150 | 17 | 3.0 | 215 | 28 |
| OGS 1200 | 75 | 17 | 3.0 | 150 | 22 |
| OGS 1250 | 150 | 17 | 3.0 | 225 | 28 |
POKER SCREW DRIVERS
| PROD. NO. | TIP SIZE B X T | A | C | D | L | WT.GMS |
| 871 | SQ POKER | 95 | 22 | 6 | 180 | 55 |
PRECISION SCREW DRIVER SET
| PROD. NO. | CONTENTS |
| PSFP6 | Precision Screw Driver Set (6 Pcs.) (Containing flat 1.4mm, 2.0mm Tip 2.4mm, 3.0mm & PHILIPS Tip no. 1&2) |
| PSF6 | Precision Screw Driver Set (6 Pcs.) (Containing flat 0.8mm, 1.0mm Tip 1.2mm, 1.6mm & 2.0mm & 2.5mm) |
| PST6 | Precision Screw Driver Set (6 Pcs.) (Containing flat 1.4mm, 2.0mm) |
SCREW DRIVER SETS
| PROD. NO. | CONTENTS | NO OF BLADES |
| 821 | PHILIPS 00, 0,1,2,3, 6 x 0.6 | 6 |
SCREW DRIVER SETS WITH NEON BULBS
| PROD. NO. | CONTENTS | NO OF BLADES |
| 802 | 6.0 x 0.8, 3.5 x 0.5, PHILIPS 0,Square Poker, PHILIPS 1 | 5 |
| 812 | 6.0 x 0.8, 3.5 x 0.5, PHILIPS 0,Square Poker, PHILIPS 1 | 5 |
| 831 | 3.5 x 0.5, 4.3 x 0.6, 6 x 0.8, PHILIPS No. 1,PHILIPS No. 2, Poker Round, Poker Sq., Wooden Screw Type | 8 |
| 840 | 6.0×0.8, 3.5×0.5, PHILIPS 0, Square Poker. PHILIPS 1 + Extension Road | 6 |
LINE TESTERS
TAPARIA® Line Tester has high quality blade and cellulose acetate plastic Handle.Fully insulated blade ensures shock proof working. Distinct glow of Neon lamp identifies line ‘live’. Features a clip for safe carrying in pocket. Available in several sizes.
| PROD. NO. | HANDLE | A | TIP SIZE B x T |
C | D | L | WT.GMS |
| 813 | Yellow | 55 | 3.5 x 0.4 | 17 | 6 | 130 | 25 |
| 814 | Green | 60 | 3.5 x 0.5 | 14 | 6 | 125 | 20 |
| 815 | Green | 100 | 3.5 x 0.5 | 18 | 6 | 180 | 35 |
| 816 | Yellow | 95 | 3.5 x 0.5 | 17 | 6 | 170 | 35 |
| 818 | Yellow | 60 | SQ.POKER | 14 | 6 | 125 | 20 |
| 873 | Yellow | 114 | 4.0 X 0.6 | 18 | 4 | 200 | 30 |
MULTIPURPOSE DIGITAL LINE TESTER
To Measure 12V to 220V AC and DC Voltage. To locate break point of an insulated wire. To check flow of current in an insulated wire from outside.
| PROD. NO. | A | B x T | C | L | WT.GMS |
| MDT 81 | 20 | 3.0 x 0.5 | 18 | 130 | 17 |
| MDTN 82 (With Neon Bulb) |
20 | 3.0 X 0.5 | 17 | 120 | 14 |
THREE IN ONE TESTER
Consists of a TAPARIA® Line Tester and an easily attachable extension cord with a Test Probe. Easily checks ‘live’ or Neutral wire, continuity or break in circuit. Identifies two different phases. Ideal for domestic use.
In phase line where board is open lamp hold will not work at 440 V bulb will be damaged where as 3 in 1 tester will indicate this different phase of 440 V by glowing more brightly.
If we get phase from one wire and at the other end bulb does not glow indicate wires are from same phase.
| PROD. NO. | Handle | TIP SIZE B x T |
C | L | WT.GMS |
| 817 – 1413 Ext. Cord. |
Yellow | 3.5 x 0.5 | 14 | 1200 | 65 |
SCREW DRIVER KITS(HANGING POUCH)
| PROD.NO | CONTENTS |
| 1013 | Consisting of 8 Screw Driver 713, 922, 725, 828, 912, 712, 937, P5 861 75 |
SCREW DRIVER KITS(BLISTER PACKAGING)
| PROD.NO | CONTENTS |
| 1014 | Consisting of 7 Screw Drivers 824, P5 861 75, P6 862 100, 913, 925, 935, 814 |
| 1017 | Consisting of 5 PHILIPS Screw Driver P3 859 50,P3 860 60, P5861 75, P6 862 100, P8 863 200 |
