TAPARIA® Offer the most comprehensive range of screw drivers:-
• Made out of High Grade Steel and Transparent green cellulose acetate handle.
• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.
• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

FLAT SCREW DRIVERS

The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.
Flat_Screw_Drivers
Flat_Screw_Drivers_01

PROD.NO TIP SIZE B x T A C D L WT.GMS
932 0.6 x 0.4 50 13 3.0 110 10
933 1.6 x 0.4 75 13 3.0 135 12
911 3.0 x 0.4 50 13 3.0 110 10
901 3.0 x 0.5 75 17 3.0 150 21
902 3.0 x 0.4 100 17 3.0 175 22
912 3.5 x 0.5 75 14 3.5 140 16
842 3.5 x 0.5 150 17 3.5 225 35
913 4.0 x 0.6 100 18 4.0 18 30
712 4.0 x 0.6 125 17 4.0 200 30
833 4.0 x 0.6 200 18 4.0 280 40
713 5.0 x 0.6 75 18 5.0 155 35
936 5.0 x 0.8 150 22 5.0 236 60
921 6.0 x 0.6 75 22 6.0 161 55
922 6.0 x 6.0 100 22 6.0 186 60
923 6.0 x 0.8 125 22 6.0 211 62
824 6.0 x 0.8 150 22 6.0 236 65
825 6.0 x 0.8 200 22 6.0 286 77
826 6.0 x 0.8 250 22 6.0 336 90
924 8.0 x 1.2 125 28 8.0 230 115
925 8.0 x 1.2 150 28 8.0 255 130
926 8.0 x 1.2 175 28 8.0 280 130
827 8.0 x 1.2 200 28 8.0 305 145
828 8.0 x 1.2 250 28 8.0 355 165
829 8.0 x 1.2 300 28 8.0 405 180
725 10.0 x 1.2 150 26 8.0 248 120
927 10.0 x 1.2 200 34 10.0 327 245
928 10.0 x 1.2 250 34 10.0 377 275
929 10.0 x 1.5 300 34 10.0 427 310
930 10.0 X 1.5 400 34 10.0 527 365
931 13.0 x 1.9 450 34 10.0 577 395
INSULATED SCREW DRIVERS

Insulated_Screw_Drivers
Insulated_Screw_Drivers_01

PROD.NO TIP SIZE B x T A C D L WT.GMS
822 I 3.5 x 0.5 125 17 3.5 200 30
842 I 3.5 x 0.5 150 17 3.5 225 35
832 I 3.5 x 0.5 200 17 3.5 275 40
823 I 3.4 x 0.6 150 18 4.0 230 40
833 I 4.0 x 0.6 200 18 4.0 280 40
934 I 5.0 x 0.6 100 22 5.0 186 50
935 I 5.0 x 0.6 125 22 5.0 211 55
936 I 5.0 x 0.8 150 22 5.0 236 60
937 I 5.5 x 0.6 200 22 5.0 286 70
938 I 5.0 x 0.8 250 22 5.0 336 80
939 I 5.0 x 0.8 300 22 5.0 386 90
824 I 6.0 x 0.8 150 22 6.0 236 65
825 I 6.0 x 0.8 200 22 6.0 286 77
826 I 6.0 x 0.8 250 22 6.0 336 90
827 I 8.0 x 1.2 200 28 8.0 305 145
829 I 8.0 x 1.2 300 28 8.0 405 180
928 I 10.0 x 1.2 250 34 10.0 377 275
PHILIPS SCREW DRIVERS

Philips_Screw_Drivers
Philips_Screw_Drivers_01

PROD.NO TIP SIZE B x T A C D L WT.GMS
P3 859 50 0 50 13 3 108 15
P3 860 60 0 60 17 3 135 20
P3 860 150 0 150 17 3 225 25
P5 861 75 1 75 22 3 160 50
P5 861 100 1 100 22 5 185 55
P5 861 150 1 150 22 5 235 60
P5 861 200 1 200 22 5 285 65
P6 862 100 2 100 22 6 198 80
P6 862 150 2 150 26 6 248 95
P6 862 200 2 200 26 6 298 110
P6 862 250 2 250 26 6 348 125
P6 862 300 2 300 26 6 398 140
P8 863 150 3 150 28 8 255 155
P8 863 200 3 200 28 8 305 175
P8 863 250 3 250 28 8 355 195
P8 863 300 3 300 28 8 405 215
P1 864 200 4 200 34 10 327 250
STUBBY SCREW DRIVERS

Stubby_Screw_Drivers
Stubby_Screw_Drivers_01

PROD.NO TIP SIZE B x T A C D L WT.GMS
855 6.0 PHILIPS NO. 2 50 30 6 100 45
TWO-IN-ONE STUBBY SCREW DRIVERS

Two_In_One_Stubby_Screw_Drivers

Two_In_One_Stubby_Screw_Drivers_01

PROD.NO A C D L TIP SIZE
D1 x T1
TIP SIZE
D2 x   T1
L1 WT.
GMS
974 95 22 6 180 6.0 x 0.8 6.0 x 2 PHILIPS 75 55
TWO-IN-ONE  SCREW DRIVERS

Two_In_One_Screw_Drivers

Two_In_One_Screw_Drivers_01

PROD.NO A C L TIP SIZE
D1 x T1
TIP SIZE
D2 x   T1
L1 WT.
GMS
803 55 17 130 3.5 x 0.5 3.5 x 0 PHILIPS 122 25
804 75 18 155 5.0 x 0.8 5.0 x 1 PHILIPS 122 40
810 60 14 125 2.3 x  0.4 25 x 00 PHILIPS 110 20
850 200 22 284 3.5  x 0 PHILIPS 5.0 x 1 PHILIPS 250 80
851 200 25 396 5.0 X 1 PHILIPS 6.0 x 2 PHILIPS 250 105
852 200 27 313 6.0 x 2 PHILIPS 8.0 x 3 PHILIPS 255 170
903 I 250 23 342 6.0 x 0.8 2.5 x 00 PHILIPS 300 100
904 100 23 192 6.0 X 0.7 50 X 1 PHILIPS 150 60
905 140 23 232 6.0 X 0.8 6.0 X 2 PHILIPS 190 70
906 140 27 245 8.0 X 0.9 8.0 X 3 PHILIPS 205 115
907 200 23 292 6.0 X 0.8 6.0 X 2 PHILIPS 250 95
TORX SCREW DRIVERS

The blade is made from high grade silicon manganese steel. It is full hardened & tempered withstand high torque requirements and magnetized to lift screws etc. from confined spares or to hold screw in position. It is also effectively protected against corrosion by Nickel Chrome plating.
Torx_Screw_Drivers
Torx_Screw_Drivers_01

PROD. NO. A C D L WT.GMS
T – 5 75 17 3.0 140 22
T – 5L 150 17 3.0 215 28
T – 6 75 17 3.0 150 22
T – 6L 150 17 3.0 225 28
T – 8 75 17 3.5 150 25
T – 8L 150 17 3.5 225 35
T – 10 75 17 3.5 150 25
T – 10L 150 17 3.5 225 35
T – 15 75 22 5.0 161 50
T – 15L 150 22 5.0 236 60
T – 20 100 22 5.0 186 55
T – 20L 200 22 5.0 286 65
T – 25 100 26 6.0 198 90
T – 25 L 200 26 6.0 298 105
T – 30 100 26 6.0 198 90
T – 30 L 200 26 6.0 298 105
T – 40 125 28 8.0 230 120
T –  40 L 200 28 8.0 305 150
STRIKING SCREW DRIVERS

Striking_Screw_Drivers

PROD. NO. A C D L WT.GMS
OGS 8210 75 17 3.0 140 22
OGS 8260 150 17 3.0 215 28
OGS 1200 75 17 3.0 150 22
OGS 1250 150 17 3.0 225 28
POKER SCREW DRIVERS

Poker_Screw_Driver
Poker_Screw_Driver_01

PROD.  NO. TIP SIZE B X T A C D L WT.GMS
871 SQ POKER 95 22 6 180 55

 

PRECISION SCREW DRIVER SET

Precision_Screw_Driver_Set

PROD.  NO. CONTENTS
PSFP6 Precision Screw Driver Set (6 Pcs.)
(Containing flat 1.4mm, 2.0mm
Tip 2.4mm, 3.0mm & PHILIPS Tip no. 1&2)
PSF6 Precision Screw Driver Set (6 Pcs.)
(Containing flat 0.8mm, 1.0mm
Tip 1.2mm, 1.6mm & 2.0mm & 2.5mm)
PST6 Precision Screw Driver Set (6 Pcs.)
(Containing flat 1.4mm, 2.0mm)
SCREW DRIVER SETS

Screw_Driver_Sets

PROD.  NO. CONTENTS NO OF BLADES
821 PHILIPS 00, 0,1,2,3, 6 x 0.6 6
SCREW DRIVER SETS WITH NEON BULBS

Screw_Driver_Sets_With_Neon_Bulbs

PROD. NO. CONTENTS NO OF BLADES
802 6.0 x 0.8, 3.5 x 0.5, PHILIPS 0,Square Poker, PHILIPS 1 5
812 6.0 x 0.8, 3.5 x 0.5, PHILIPS 0,Square Poker, PHILIPS 1 5
831 3.5 x 0.5, 4.3 x 0.6, 6 x 0.8, PHILIPS No. 1,PHILIPS No. 2, Poker Round, Poker Sq., Wooden Screw Type 8
840 6.0×0.8, 3.5×0.5, PHILIPS 0, Square Poker. PHILIPS 1 + Extension Road 6
LINE TESTERS

TAPARIA® Line Tester has high quality blade and cellulose acetate plastic Handle.Fully insulated blade ensures shock proof working. Distinct glow of Neon lamp identifies line ‘live’. Features a clip for safe carrying in pocket. Available in several sizes.
Line_Tester
Line_Tester_01

PROD.  NO. HANDLE A TIP SIZE
B x T
C D L WT.GMS
813 Yellow 55 3.5 x 0.4 17 6 130 25
814 Green 60 3.5 x 0.5 14 6 125 20
815 Green 100 3.5 x 0.5 18 6 180 35
816 Yellow 95 3.5 x 0.5 17 6 170 35
818 Yellow 60 SQ.POKER 14 6 125 20
873 Yellow 114 4.0 X 0.6 18 4 200 30
MULTIPURPOSE DIGITAL LINE TESTER

To Measure 12V to 220V AC and DC Voltage. To locate break point of an insulated wire. To check flow of current in an insulated wire from outside.
Multipurpose_Digital_Line_Tester
Multipurpose_Digital_Line_Tester_01

PROD. NO. A  B x T C L WT.GMS
MDT 81 20 3.0 x 0.5 18 130 17
MDTN 82
(With Neon Bulb)
20 3.0 X 0.5 17 120 14
THREE IN ONE TESTER

Consists of a TAPARIA® Line Tester and an easily attachable extension cord with a Test Probe. Easily checks ‘live’ or Neutral wire, continuity or break in circuit. Identifies two different phases. Ideal for domestic use.

In phase line where board is open lamp hold will not work at 440 V bulb will be damaged where as 3 in 1 tester will indicate this different phase of 440 V by glowing more brightly.
If we get phase from one wire and at the other end bulb does not glow indicate wires are from same phase.
Three_In_One_Tester
Three_In_One_Tester_01

PROD.  NO. Handle  TIP SIZE
B x T
C L WT.GMS
817 – 1413
Ext. Cord.
Yellow 3.5 x 0.5 14 1200 65
SCREW DRIVER KITS(HANGING POUCH)

Screw_Driver_Kits(Hanging)

PROD.NO CONTENTS
1013 Consisting of 8 Screw Driver 713, 922, 725, 828, 912, 712, 937, P5 861 75
SCREW DRIVER KITS(BLISTER PACKAGING)

Screw_Driver_Kits(blister )

PROD.NO CONTENTS
1014 Consisting of 7 Screw Drivers 824, P5 861 75, P6 862 100, 913, 925, 935, 814
1017 Consisting of 5 PHILIPS Screw Driver P3 859 50,P3 860 60, P5861 75, P6 862 100, P8 863 200

Check the PDF