With transverse and longitudinal vials Used as level and protractor Aluminum frame Magnetic bottom The sea level is permanently set inside the chip, zero setting is not needed when batteries are replaced Buttons: ON/OFF, absolute and incremental measurement, keep the reading, buzzer alarm, unit (mm/m, %, in/ft) conversion, backlight The display flips over when the […]

No need to set zero before use With mounting holes (for M5 screw)   Code Length Sensitivity 4908-100 100mm 0.1mm/m(=0.0057°) Check the PDF

No need to set zero before use Suitable for small spaces like crankshaft Longitudinal and transverse V-grooves on bottom for shafts (shafts dia. 19.3~115.9mm) With transverse vial   Code Length Sensitivity 4907-90 90mm 0.1mm/m(=0.0057°) Check the PDF

V-groove on bottom for shafts (shafts dia. 15~70mm) With transverse vial Supplied with adjusting wrench   Code Length (L) Sensitivity B C 4903-150A 150mm 0.02mm/m(=0.001°) 40 45 4903-200A 200mm 0.02mm/m(=0.001°) 42 47 4903-150A 300mm 0.02mm/m(=0.001°) 45 50 Check the PDF

No need to set zero before use V-groove on bottom for shafts (shafts dia. 19.3~115.9mm) With longitudinal vial   Code Size (L) Sensitivity 4905-160 160mm 0.02mm/m(=0.001°) 4905-200 200mm 0.02mm/m(=0.001°) 4905-300 300mm 0.02mm/m(=0.001°) 4905-500 500mm 0.02mm/m(=0.001°) Check the PDF

No need to set zero before use Three V-grooves for shafts (shafts dia. 19.3~115.9mm) With longitudinal vial     Code Size (LxL) Sensitivity 4906-150 150x150mm 0.02mm/m(=0.001°) 4906-200 200x200mm 0.02mm/m(=0.001°) 4906-300 300x300mm 0.02mm/m(=0.001°) Check the PDF

DIGITAL LEVEL AND PROTRACTOR  CODE – 2173 Aluminum frame Magnetic bottom with V-groove for shafts Zero setting can be made on any plain surfaces Buttons: ON/OFF, ZERO, HOLD (keep the reading) CR2032 battery Automatic power off   Code Range Resolution Accuracy 2173-360 0-360 (90°x4) 0.1° (= 1.745 mm/m) 0° & 90°: ±0.1°; others: ° and […]

Color LCD, touch panel X-Y axis measurement Set the tolerance and the display is shown in different colors Check the PDF

Center head: To locate center of cylinder with diameter (Ød): 30 – 100mm Accuracy: ±0.15mm Protractor head: To set the blade at desired angle to an edge of a workpiece, and can be used to measure angles Range: 0-180° Accuracy: ±7min. Square head: To set the blade at 90° or 45° to an edge of […]

UNIVERSAL PROTRACTOR CODE – 2372 Parallax-free reading Made of stainless steel Optional accessory: clamp (code2372-CLAMP), suitable for height gages 1156, 1351 and 1250   Code Range Graduation Accuracy 2372-360 0 – 360° 5′ ±5′ Check the PDF   DIAL PROTRACTOR CODE – 2373 Made of stainless steel Optional accessory: clamp (code2372-CLAMP), suitable for height gages […]

PROTRACTOR CODE – 4780 Made of stainless steel Satin chrome plated scale With clamping screw   Code  Size (AxB) Range  Graduation Accuracy 4780-85 85x150mm 0 – 180° 1° ±0.3° Check the PDF   PROTRACTOR CODE – 4781 Made of stainless steel Satin chrome plated scale With clamping screw   Code  Size Range  Graduation Accuracy 4781-85 […]

DIGITAL PROTRACTOR CODE – 2171 Buttons: ON/OFF, HOLD (keep the reading), ZERO, ABS (absolute and incremental measurement) Fix the locking screw at 4 positions for different measuring ranges: 0°~225°, -225°~0°, -45°~180°, -180°~45° Remove the locking screw for 360° range With level vial Battery CR2032 Automatic power off   Code Size (L) Range Resolution Accuracy 2171-250 […]