Imada offers motorized peel testers in vertical or horizontal configurations. The motorized test stand, digital force gauge and peel fixture apply tension to a safety seals, tapes and laminates. Special attachments and fixtures facilitate 45°, 90°, 180°, ‘T’ and rotary peel tests.
Motorized peel testers offer speed control and highest degree of repeat ability with the ability to set a constant test speed and range of movement. All peel testers with digital force gauges have data output capability for analysis by optional data acquisition software.

45 Degree Peel Tester

MX2-110 Test Stand
ZT / DS2 Digital Force Gauge
P45-50N Fixture

mx2-110-z2-45peel1

Standard Features
45° Peel Tester Standard Features
  • 45° peel fixture Clearance: 10mm ~ 90mm
    (.4″ ~ 3.5″), Peel
    Length: approximately 1″
  • Wide speed range: 0.4 – 12 in/min speed is set digitally (optional speed ranges available)
  • Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
  • Selectable Manual, Increment, and Force Control (with Z Series
    gauges) modes
  • Easy-to-use program dial and menu screens control mode, speed, timer and cycles
  • MX2-110 Stroke: 9.4″ (240mm)
  • Max clearance 9″ (with extender 14″)
  • Force gauge units are selectable: Newton, lbf and kgf
  • Force gauge output: RS-232C, Digimatic and analog outputs

 

90 Degree Peel Tester

MX2-110 Test Stand
ZT / DS2 Digital Force Gauge
P90-200N Fixture

90-degree-peel-tester-zts

Standard Features
90° Peel Tester Standard Features
  • 90° peel fixture maximum sample length 155mm (6.1″), width 80mm (3.14″)
  • Wide speed range: 0.4 – 12 in/min speed is set digitally (other speed ranges available)
  • Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
  • Selectable Manual, Increment, and Force Control (with Z Series gauges) modes
  • Easy-to-use program dial and menu screens control mode, speed, timer and cycles
  • MX2-110 Stroke: 9.4″ (240mm)
  • Max clearance 9″ (with extender 14″)
  • Force gauge units are selectable: Newton, lbf and kgf
  • Force gauge output: RS-232C, Digimatic and analog outputs

 

T-Peel Tester

MX2-110 Test Stand
ZT/DS2 Digital Force Gauge
Gripping Attachments

mx2-110-tpeel1

Standard Features
T-Peel Tester Standard Features
  • Wide speed range: 0.4 – 12 in/min speed is set digitally (optional speed ranges available)
  • Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
  • Selectable Manual, Increment, and Force Control (with ZT Series gauges) modes
  • Easy-to-use program dial and menu screens control mode, speed, timer and cycles
  • MX2-110 Stroke: 9.4″ (240mm)
  • Max clearance 9″ (with extender 14″)
  • Force gauge units are selectable: Newton, lbf and kgf
  • Force gauge output: USB (ZT), RS-232C, Digimatic and analog outputs

 

Rotary Peel Tester

MX2-110 Test Stand
ZT/DS2 Digital Force Gauge
RP-1A Rotary Peel Fixture

mx2-110rotarypeel1

Standard Features
Rotary Peel Tester Standard Features
  • RP-1A rotary peel fixture: 1-1.125″ wide x 6″ dia.
  • Wide speed range: 0.4 – 12 in/min speed is set digitally (other speed ranges available)
  • Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
  • Selectable Manual, Increment, and Force Control (with ZT Series gauges) modes
  • Easy-to-use program dial and menu screens control mode, speed, timer and cycles
  • MX2-110 Stroke: 9.4″ (240mm)
  • Max clearance 9″ (with extender 14″)
  • Force gauge units are selectable: Newton, lbf and kgf
  • Force gauge output: USB (ZT), RS-232C, Digimatic and analog outputs

 

IPT-200-5N Embossed Carrier Tape Peel Tester

Model:IPT-200-5N
Capacity: 18ozf, 500 gf, 5N

ipt200

Standard Features
IPT-200-5N Embossed Carrier Tape Peel Tester Standard Features
  • 180° peel for embossed carrier tape
  • Speed (selectable): 120, 300, 500, 1000, 1500mm/min
  • Programmable high/low setpoints with color-coded LED
    indicators and output signal for quick go/no go testing
  • 1,000 Data memory for computer download
  • Stroke: 15.74″ (400mm)
  • ozf, gf, and N units are selectable
  • Real time and peak mode (selectable)
  • USB, RS-232C and Analog outputs
  • Overload capacity 150% of F.S.
  • Overload alarm and output signal

 

Specifications
Width of Sample 3.46″ (88mm) max.
Speed 120, 300, 500, 1000, 1500 mm/min (selectable)
Peeling Angle 165~180°
Stroke 15.74″ (400 mm)
Safety Features Emergency Switch, Overload Stop Function, Stroke Limit Switch
Capacity 18 ozf, 500 gf, 5N
Accuracy ±0.2% F.S., ±1 LSD
Units N, gf, ozf (selectable)
Display 4 digit LCD; Unit Mode; Overload LED; Comparator LEDs
Sampling Speed 1,000 times/sec Max.
Display Update 10 times/sec
Overload Capacity Approx. 150% F.S. (LED flashes and alarm sounds beyond110%)
Comparator Function Programmable high/low setpoints with color-coded indicators
Output USB, RS-232, Analog (-2 to +2 V F.S.)
Temp. 32° to 100°F (0° to 40°C)
Dimensions 27.95″L x 4.96″H x 11.81″D (710mm L x 126mm H x 300mm D)
Weight 24.2 lb (11 kg)
Power 115/230 VAC