Imada offers motorized peel testers in vertical or horizontal configurations. The motorized test stand, digital force gauge and peel fixture apply tension to a safety seals, tapes and laminates. Special attachments and fixtures facilitate 45°, 90°, 180°, ‘T’ and rotary peel tests.
Motorized peel testers offer speed control and highest degree of repeat ability with the ability to set a constant test speed and range of movement. All peel testers with digital force gauges have data output capability for analysis by optional data acquisition software.
45 Degree Peel Tester
MX2-110 Test Stand
ZT / DS2 Digital Force Gauge
P45-50N Fixture
Standard Features
45° Peel Tester Standard Features
- 45° peel fixture Clearance: 10mm ~ 90mm
(.4″ ~ 3.5″), Peel
Length: approximately 1″ - Wide speed range: 0.4 – 12 in/min speed is set digitally (optional speed ranges available)
- Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
- Selectable Manual, Increment, and Force Control (with Z Series
gauges) modes - Easy-to-use program dial and menu screens control mode, speed, timer and cycles
- MX2-110 Stroke: 9.4″ (240mm)
- Max clearance 9″ (with extender 14″)
- Force gauge units are selectable: Newton, lbf and kgf
- Force gauge output: RS-232C, Digimatic and analog outputs
90 Degree Peel Tester
MX2-110 Test Stand
ZT / DS2 Digital Force Gauge
P90-200N Fixture
Standard Features
90° Peel Tester Standard Features
- 90° peel fixture maximum sample length 155mm (6.1″), width 80mm (3.14″)
- Wide speed range: 0.4 – 12 in/min speed is set digitally (other speed ranges available)
- Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
- Selectable Manual, Increment, and Force Control (with Z Series gauges) modes
- Easy-to-use program dial and menu screens control mode, speed, timer and cycles
- MX2-110 Stroke: 9.4″ (240mm)
- Max clearance 9″ (with extender 14″)
- Force gauge units are selectable: Newton, lbf and kgf
- Force gauge output: RS-232C, Digimatic and analog outputs
T-Peel Tester
MX2-110 Test Stand
ZT/DS2 Digital Force Gauge
Gripping Attachments
Standard Features
T-Peel Tester Standard Features
- Wide speed range: 0.4 – 12 in/min speed is set digitally (optional speed ranges available)
- Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
- Selectable Manual, Increment, and Force Control (with ZT Series gauges) modes
- Easy-to-use program dial and menu screens control mode, speed, timer and cycles
- MX2-110 Stroke: 9.4″ (240mm)
- Max clearance 9″ (with extender 14″)
- Force gauge units are selectable: Newton, lbf and kgf
- Force gauge output: USB (ZT), RS-232C, Digimatic and analog outputs
Rotary Peel Tester
MX2-110 Test Stand
ZT/DS2 Digital Force Gauge
RP-1A Rotary Peel Fixture
Standard Features
Rotary Peel Tester Standard Features
- RP-1A rotary peel fixture: 1-1.125″ wide x 6″ dia.
- Wide speed range: 0.4 – 12 in/min speed is set digitally (other speed ranges available)
- Screw drive system and high performance brushless motor provides smooth and powerful operation over the entire speed range.
- Selectable Manual, Increment, and Force Control (with ZT Series gauges) modes
- Easy-to-use program dial and menu screens control mode, speed, timer and cycles
- MX2-110 Stroke: 9.4″ (240mm)
- Max clearance 9″ (with extender 14″)
- Force gauge units are selectable: Newton, lbf and kgf
- Force gauge output: USB (ZT), RS-232C, Digimatic and analog outputs
IPT-200-5N Embossed Carrier Tape Peel Tester
Model:IPT-200-5N
Capacity: 18ozf, 500 gf, 5N
Standard Features
IPT-200-5N Embossed Carrier Tape Peel Tester Standard Features
- 180° peel for embossed carrier tape
- Speed (selectable): 120, 300, 500, 1000, 1500mm/min
- Programmable high/low setpoints with color-coded LED
indicators and output signal for quick go/no go testing - 1,000 Data memory for computer download
- Stroke: 15.74″ (400mm)
- ozf, gf, and N units are selectable
- Real time and peak mode (selectable)
- USB, RS-232C and Analog outputs
- Overload capacity 150% of F.S.
- Overload alarm and output signal
Specifications
| Width of Sample | 3.46″ (88mm) max. |
| Speed | 120, 300, 500, 1000, 1500 mm/min (selectable) |
| Peeling Angle | 165~180° |
| Stroke | 15.74″ (400 mm) |
| Safety Features | Emergency Switch, Overload Stop Function, Stroke Limit Switch |
| Capacity | 18 ozf, 500 gf, 5N |
| Accuracy | ±0.2% F.S., ±1 LSD |
| Units | N, gf, ozf (selectable) |
| Display | 4 digit LCD; Unit Mode; Overload LED; Comparator LEDs |
| Sampling Speed | 1,000 times/sec Max. |
| Display Update | 10 times/sec |
| Overload Capacity | Approx. 150% F.S. (LED flashes and alarm sounds beyond110%) |
| Comparator Function | Programmable high/low setpoints with color-coded indicators |
| Output | USB, RS-232, Analog (-2 to +2 V F.S.) |
| Temp. | 32° to 100°F (0° to 40°C) |
| Dimensions | 27.95″L x 4.96″H x 11.81″D (710mm L x 126mm H x 300mm D) |
| Weight | 24.2 lb (11 kg) |
| Power | 115/230 VAC |