Bore Gauges Archives - Gokul Traders

Capable of ID (inside diameter) measurement close to the bottom of a hole.
Carbide contact point ensuring high durability and wear resistance.
Grip is large and hollow to reduce effect of body heat on high-accuracy measurements.
Alternative indicators may be used in place of those recommended*.
* Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
Optional extension rods can be attached for measuring deep holes. (For details, refer to page C-45.)
A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Washer	Probing depth
511-415	15-35mm	1.2mm	4N or less	6N or less	511-415	Not supplied	Not supplied	11 pcs.	1 pc.	150mm
511-416	35-60mm		4N or less	6N or less	511-416			6 pcs.	4 pcs.
511-417	50-150mm		5N or less	10N or less	511-417			11 pcs.	4 pcs.
511-425	15-35mm	1.2mm	4N or less	6N or less	511-415	204658 (Graduation: 0.01mm)	21DZA000	11 pcs.	1 pc.	150mm
511-426	35-60mm		4N or less	6N or less	511-416			6 pcs.	4 pcs.
511-427	50-150mm		5N or less	10N or less	511-417			11 pcs.	4 pcs.
511-435	15-35mm	1.2mm	4N or less	6N or less	511-415	210958-10 (Graduation: 0.001mm)	21DZA000	11 pcs.	1 pc.	150mm
511-436	35-60mm		4N or less	6N or less	511-416			6 pcs.	4 pcs.
511-437	50-150mm		5N or less	10N or less	511-417			11 pcs.	4 pcs.

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Washer	Probing depth
511-418	.6-1.4″	.047″	4N or less	6N or less	511-418	Not supplied	Not supplied	11 pcs.	1 pc.	6″
511-419	1.4-2.4″		4N or less	6N or less	511-419			6 pcs.	4 pcs.
511-420	2.0-6.0″		5N or less	10N or less	511-420			11 pcs.	4 pcs.
511-428	.6-1.4″	.047″	4N or less	6N or less	511-418	292258 (Graduation: .0005″)	21DZA000	11 pcs.	1 pc.	6″
511-429	1.4-2.4″		4N or less	6N or less	511-419			6 pcs.	4 pcs.
511-430	2.0-6.0″		5N or less	10N or less	511-420			11 pcs.	4 pcs.
511-438	.6-1.4″	.047″	4N or less	6N or less	511-418	292358-10 (Graduation: .0001″)	21DZA000	11 pcs.	1 pc.	6″
511-439	1.4-2.4″		4N or less	6N or less	511-419			6 pcs.	4 pcs.
511-440	2.0-6.0″		5N or less	10N or less	511-420			11 pcs.	4 pcs.

Notes:

1) A 10mm (.4″) sub-anvil is supplied with 511-415/425/435/418/428/438 and a 50mm (2″) sub-anvil is supplied with 511-417/427/437/420/430/440.
2) It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)

Contact Points

DIMENSIONS

Notes: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil							Interchangeable washer		Sub-Anvil
Bore gage (Main body)	Marked No.	Order No.	Indication of measuring size	L1	L22	R4	L14	Order No.	t	Order No.	L23	L19
511-415 511-418 ( ) Used 10mm/.4″ Sub-Anvil	1	21DZA376A	15mm(25mm)/.59″(.98″)	4.5mm/.18″	2.5 mm/ .1″	SR1 mm/SR.04″	2mm/.08″	212127	0.5mm/.02″	21DAA563	2.5mm/.1″	10mm/.4″
	2	21DZA376B	16mm(26mm)/.63″(1.02″)	5.5mm/.22″			3mm/.12″
	3	21DZA376C	17mm(27mm)/.67″(1.06″)	6.5mm/.26″			4mm/.16″
	4	21DZA376D	18mm(28mm)/.71″(1.10″)	7.5mm/.30″			5mm/.20″
	5	21DZA376E	19mm(29mm)/.75″(1.14″)	8.5mm/.33″			6mm/.24″
	6	21DZA376F	20mm(30mm)/.79″(1.18″)	9.5mm/.37″		SR1.5 mm/SR.06″	7mm/.28″
	7	21DZA376G	21mm(31mm)/.83″(1.22″)	10.5mm/.41″			8mm/.31″
	8	21DZA376H	22mm(32mm)/.87″(1.26″)	11.5mm/.45″			9mm/.35″
	9	21DZA376J	23mm(33mm)/.91″(1.30″)	12.5mm/.49″			10mm/.39″
	10	21DZA376L	24mm(34mm)/.94″(1.34″)	13.5mm/.53″			11mm/.43″
	11	21DZA376M	25mm(35mm)/.98″(1.38″)	14.5mm/.57″			12mm/.47″
511-416 511-419	1	21DZA404A	35mm/1.38″	17.5mm/.69″	7.5 mm/ .3″	SR1.5 mm/SR.06″	10mm/.39″	212127 212128 212129 212130	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″
	2	21DZA404B	40mm/1.57″	22.5mm/.89″			15mm/.59″
	3	21DZA404C	45mm/1.77″	27.5mm/1.08″			20mm/.79″
	4	21DZA404D	50mm/1.97″	32.5mm/1.28″			25mm/.98″
	5	21DZA404E	55mm/2.17″	37.5mm/1.48″			30mm/1.18″
	6	21DZA404F	60mm/2.36″	42.5mm/1.67″			35mm/1.38″
511-417 511-420 ( ) Used 50mm/2″ Sub-Anvil	1	21DZA404A	50mm(100mm)/1.97″(3.94″)	17.5mm/.69″	7.5 mm/ .3″	SR1.5 mm/SR.06″	10mm/.39″	212127 212128 212129 212130	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″	21DAA596	7.5mm/.3″	50mm/2″
	2	21DZA404B	55mm(105mm)/2.17″(4.13″)	22.5mm/.89″			15mm/.59″
	3	21DZA404C	60mm(110mm)/2.36″(4.33″)	27.5mm/1.08″			20mm/.79″
	4	21DZA404D	65mm(115mm)/2.56″(4.53″)	32.5mm/1.28″			25mm/.98″
	5	21DZA404E	70mm(120mm)/2.76″(4.72″)	37.5mm/1.48″			30mm/1.18″
	6	21DZA404F	75mm(125mm)/2.95″(4.92″)	42.5mm/1.67″			35mm/1.38″
	7	21DZA404G	80mm(130mm)/3.15″(5.12″)	47.5mm/1.87″			40mm/1.57″
	8	21DZA404H	85mm(135mm)/3.35″(5.31″)	52.5mm/2.07″			45mm/1.77″
	9	21DZA404J	90mm(140mm)/3.54″(5.51″)	57.5mm/2.26″			50mm/1.97″
	10	21DZA404L	95mm(145mm)/3.74″(5.71″)	62.5mm/2.46″			55mm/2.17″
	11	21DZA404M	100mm(150mm)/3.94″(5.91″)	67.5mm/2.66″			60mm/2.36″

Technical Data
Accuracy: Metric models 4µm
Inch models .00016″
Repeatability: Metric models 1µm
Inch models .00004″
Adjacent error:Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chapter F)
21DZA000: Dial protection cover

Recommended dial indicators (see Chapter F)
Metric models: 204658 (0.01mm)
2972T8 (0.01mm – One-revolution type)
210958-10 (0.001mm)
290058-10 (0.001mm – One-revolution type)
Inch models: 292258 (.0005″)
2977T8 (.0005″ – One-revolution type)
292358-10 (.0001″)
291058-10 (.0001″ – One-revolution type)

Recommended digimatic indicators (see Chapter F)
Metric models: 543-3108 (0.001mm)
Inch models: 543-3128 (0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.

Micrometer head is attached to the anvil for accurate dimensional setting.
Longer plunger stroke with no affect on accuracy.
Carbide is used for the contact point ensuring high durability and wear resistance.
This model reduces the influence of heat from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
Wide measuring range with sub-anvils.
Alternative indicators may be used in place of those recommended*.
* Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
Optional extension rods can be attached for measuring deep holes. (For details, refer to page C-45.)
A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.) details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set						Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Micrometer head	Sub-Anvil	Spanner	Probing depth
511-803	60-100mm	1.6mm	5N or less	10N or less	511-803	Not supplied	Not supplied	1 pc.	2 pcs.	3 pcs.	150mm
511-804	100-160mm		5N or less	10N or less	511-804				3 pcs.	2 pcs.	150mm
511-805	150-250mm		6N or less	15N or less	511-805				4 pcs.		250mm
511-806	250-400mm			15N or less	511-806				3 pcs.
511-807	400-600mm			20N or less	511-807				2 pcs.
511-808	600-800mm			20N or less	511-808				2 pcs.
511-823	60-100mm	1.6mm	5N or less	10N or less	511-803	210958-10 (Graduation: 0.001mm)	21DZA000	1 pc.	2 pcs.	3 pcs.	150mm
511-824	100-160mm		5N or less	10N or less	511-804				3 pcs.	2 pcs.	150mm
511-825	150-250mm		6N or less	15N or less	511-805				4 pcs.		250mm
511-826	250-400mm			15N or less	511-806				3 pcs.
511-827	400-600mm			20N or less	511-807				2 pcs.
511-828	600-800mm			20N or less	511-808				2 pcs.
511-813	60-100mm	1.6mm	5N or less	10N or less	511-803	204658 (Graduation: 0.01mm)	21DZA000	1 pc.	2 pcs.	3 pcs.	150mm
511-814	100-160mm		5N or less	10N or less	511-804				3 pcs.	2 pcs.	150mm
511-815	150-250mm		6N or less	15N or less	511-805				4 pcs.		250mm
511-816	250-400mm			15N or less	511-806				3 pcs.
511-817	400-600mm			20N or less	511-807				2 pcs.
511-818	600-800mm			20N or less	511-808				2 pcs.

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set						Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Micro meter head	Sub-Anvil	Spanner	Probing depth
511-833	2.4-4.0″	.063″	5N or less	10N or less	511-833	Not supplied	Not supplied	1 pc.	2 pcs.	3 pcs.	6″
511-834	4.0-6.4″		5N or less	10N or less	511-834				3 pcs.	2 pcs.	6″
511-835	6.0-10.0″		6N or less	15N or less	511-835				4 pcs.		10″
511-836	10.0-16.0″			15N or less	511-836				3 pcs.
511-837	16.0-24.0″			20N or less	511-837				2 pcs.
511-838	24.0-32.0″			20N or less	511-838				2 pcs.
511-853	2.4-4.0″	.063″	5N or less	10N or less	511-833	292358-10 (Graduation: .0001″)	21DZA000	1 pc.	2 pcs.	3 pcs.	4″
511-854	4.0-6.4″		5N or less	10N or less	511-834				3 pcs.	2 pcs.	6″
511-855	6.0-10.0″		6N or less	15N or less	511-835				4 pcs.
511-856	10.0-16.0″			15N or less	511-836				3 pcs.
511-857	16.0-24.0″			20N or less	511-837				2 pcs.		10″
511-858	24.0-32.0″			20N or less	511-838				2 pcs.		10″
511-843	2.4-4.0″	.063″	5N or less	10N or less	511-833	292258 (Graduation: .0005″)	21DZA000	1 pc.	2 pcs.	3 pcs.	4″
511-844	4.0-6.4″		5N or less	10N or less	511-834				3 pcs.	2 pcs.	6″
511-845	6.0-10.0″		6N or less	15N or less	511-835				4 pcs.
511-846	10.0-16.0″			15N or less	511-836				3 pcs.
511-847	16.0-24.0″			20N or less	511-837				2 pcs.		10″
511-848	24.0-32.0″			20N or less	511-838				2 pcs.		10″

Notes: 1) Storage boxes for 511-807/808/837/838 models are made of wood. The boxes of other models are made of plastic.
2) It is not permissible to expand measuring range using sub-anvils other than as supplied as standard accessories. (The measurement accuracy in such cases is not guaranteed.)

Contact Points

DIMENSIONS

Range	L15	R1	L18	R2	R3	L16	0D1	0D2
60 – 100mm/2.4″ – 4″	150	SR8	28.9	SR1.0	9	38	012.8	012
100 – 160mm/4″ – 6.4″	150	SR10	28.9	SR1.0	9	50	012.8	012
150 – 250mm/6″ – 10″	250		70.3	SR1.5	12	78	019.8	015
250 – 400mm/10″ – 16″			100.9		12	90
400 – 600mm/16″ – 24″			200.9		16	120
600 – 800mm/24″ – 32″			300.9		16	120

STANDARD ACCESSORIES

Metric

Bore gage (Main body)	Micrometer head			Sub-Anvil				Spanner
Bore gage (Main body)	Parts No.	Stroke	Screw size	Marked No.	Parts No.	L1	L19	Parts No.
511-803	21DZA267	10mm	M11x1	10mm	208892	15mm	10mm	301336(2 pcs.) 202863 (1 pcs.)
511-803	21DZA267	10mm	M11x1	20mm	208894	25mm	20mm	301336(2 pcs.) 202863 (1 pcs.)
511-804	21DZA268	13mm	M11x1	10mm	208892	15mm	10mm	301336(2 pcs.)
511-804	21DZA268	13mm	M11x1	20mm	208894(2 pcs.)	25mm	20mm	301336(2 pcs.)
511-805	21DZA268	13mm	M11x1	10mm	208892	15mm	10mm	301336 (2 pcs.)
				20mm	208894(2 pcs.)	25mm	20mm
				50mm	21DAA492	55mm	50mm
511-806	953118	25mm	M16x1	25mm	208926	35mm	25mm	200154(2 pcs.)
511-806	953118	25mm	M16x1	50mm	208928(2 pcs.)	60mm	50mm	200154(2 pcs.)
511-807	953120	50mm	M16x1	50mm	208928	60mm	50mm	200154(2 pcs.)
511-807	953120	50mm	M16x1	100mm	208932	110mm	100mm	200154(2 pcs.)
511-808	953120	50mm	M16x1	50mm	208928	60mm	50mm	200154(2 pcs.)
511-808	953120	50mm	M16x1	100mm	208932	110mm	100mm	200154(2 pcs.)

Inch

Bore gage (Main body)	Micrometer head			Sub-Anvil				Spanner
Bore gage (Main body)	Parts No.	Stroke	Screw size	Marked No.	Parts No.	L1	L19	Parts No.
511-833	21DZA272	.4″	M11x1	.4″	208893	.6″	.4″	301336(2 pcs.) 202863 (1 pcs.)
511-833	21DZA272	.4″	M11x1	.8″	208895	1.0″	.8″	301336(2 pcs.) 202863 (1 pcs.)
511-834	21DZA273	.5″	M11x1	.4″	208893	.6″	.4″	301336(2 pcs.)
511-834	21DZA273	.5″	M11x1	.8″	208895(2 pcs.)	1.0″	.8″	301336(2 pcs.)
511-835	21DZA273	.5″	M11x1	.4″	208893	.6″	.4″	301336 (2 pcs.)
				.8″	208895(2 pcs.)	1.0″	.8″
				2″	21DAA493	2.2″	2″
511-836	21DZA275	1.0″	M16x1	1″	208927	1.4″	1″	200154(2 pcs.)
511-836	21DZA275	1.0″	M16x1	2″	208929(2 pcs.)	2.4″	2″	200154(2 pcs.)
511-837	902313	2.0″	M16x1	2″	208929	2.4″	2″	200154(2 pcs.)
511-837	902313	2.0″	M16x1	4″	208933	4.4″	4″	200154(2 pcs.)
511-838	902313	2.0″	M16x1	2″	208929	2.4″	2″	200154(2 pcs.)
511-838	902313	2.0″	M16x1	4″	208933	4.4″	4″	200154(2 pcs.)

Technical Data
Accuracy: Metric models 2µm
Inch models .00008″
Repeatability: Metric models 0.5µm
Inch models .00002″
Adjacent error: Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chaptern F)
21DZA000: Dial protection cover
Recommended dial indicators (see Chapter F)
Metric models: 2046S8 (0.01mm)
2972T8 (0.01mm – One-revolution type)
2109S8-10 (0.001mm)
2900S8-10 (0.001mm – One-revolution type)
Inch models: 2922S8 (.0005″)
2977T8 (.0005″ – One-revolution type)
2923S8-10 (.0001″)
2910S8-10 (.0001″ – One-revolution type)

Recommended digimatic indicators (see Chapter F)
Metric models: 543-3108 (ID-C112GXB: 0.001mm)
Inch models: 543-3128 (ID-C112GEXB: 0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.

Compact and lightweight due to the short length below the grip.
Longer plunger stroke with no affect on accuracy.
Carbide contact point ensuring high durability and wear resistance.
This model reduces the influence of heat from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
Alternative indicators may be used in plathose recommended*.
* Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner	Probing depth
511-761	18-35mm	1.2mm	4N or less	6N or less	511-761	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	50mm
511-762	35-60mm	1.2mm	4N or less	6N or less	511-762			6 pcs.	4 pcs.	Not supplied	Not supplied
511-763	50-150mm	1.6mm	5N or less	10N or less	511-763			11 pcs.		1 pc.
511-764	100-160mm	1.6mm	5N or less	10N or less	511-764			13 pcs.		Not supplied
511-771	18-35mm	1.2mm	4N or less	6N or less	511-761	21O958-1O (Graduation: 0.001mm)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	50mm
511-772	35-60mm	1.2mm	4N or less	6N or less	511-762			6 pcs.	4 pcs.	Not supplied	Not supplied
511-773	50-150mm	1.6mm	5N or less	10N or less	511-763			11 pcs.		1 pc.
511-774	100-160mm	1.6mm	5N or less	10N or less	511-764			13 pcs.		Not supplied
511-766	18-35mm	1.2mm	4N or less	6N or less	511-761	2O4658 (Graduation: 0.01mm)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	50mm
511-767	35-60mm	1.2mm	4N or less	6N or less	511-762			6 pcs.	4 pcs.	Not supplied	Not supplied
511-768	50-150mm	1.6mm	5N or less	10N or less	511-763			11 pcs.		1 pc.
511-769	100-160mm	1.6mm	5N or less	10N or less	511-764			13 pcs.		Not supplied

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner	Probing depth
511-781	.7-1.4″	.047″	4N or less	6N or less	511-781	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	2″
511-782	1.4-2.5″	.047″	4N or less	6N or less	511-782			6 pcs.	4 pcs.	Not supplied	Not supplied
511-783	2.0-6.0″	.063″	5N or less	10N or less	511-783			11 pcs.		1 pc.
511-784	4.0-6.5″	.063″	5N or less	10N or less	511-784			13 pcs.		Not supplied
511-791	.7-1.4″	.047″	4N or less	6N or less	511-781	292358-1O (Graduation: .0001″)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	2″
511-792	1.4-2.5″	.047″	4N or less	6N or less	511-782			6 pcs.	4 pcs.	Not supplied	Not supplied
511-793	2.0-6.0″	.063″	5N or less	10N or less	511-783			11 pcs.		1 pc.
511-794	4.0-6.5″	.063″	5N or less	10N or less	511-784			13 pcs.		Not supplied
511-786	.7-1.4″	.047″	4N or less	6N or less	511-781	292258 (Graduation: .0005″)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	2″
511-787	1.4-2.5″	.047″	4N or less	6N or less	511-782			6 pcs.	4 pcs.	Not supplied	Not supplied
511-788	2.0-6.0″	.063″	5N or less	10N or less	511-783			11 pcs.		1 pc.
511-789	4.0-6.5″	.063″	5N or less	10N or less	511-784			13 pcs.		Not supplied

Notes: 1) A 50mm sub-anvil is supplied with 511-763.
2) A 2″ sub-anvil is supplied with 511-783.
3) It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils.
(The measurement accuracy in such cases is not guaranteed.)

DIMENSIONS

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable washer		Spanner
Bore gage (Main body)	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t	Parts No.
511-761 511-781	1	21DZA213A	18mm/.71″	5.5mm/.22″	2.5mm/.10″	205623 205624	0.5mm/.02″ 1.0mm/.04″	102148
	2	21DZA213B	20mm/.79″	7.5mm/.30″	4.5mm/.18″
	3	21DZA213C	22mm/.87″	9.5mm/.37″	6.5mm/.26″
	4	21DZA213D	24mm/.94″	11.5mm/.45″	8.5mm/.33″
	5	21DZA213E	26mm/1.02″	13.5mm/.53″	10.5mm/.41″
	6	21DZA213F	28mm/1.10″	15.5mm/.61″	12.5mm/.49″
	7	21DZA213G	30mm/1.18″	17.5mm/.69″	14.5mm/.57″
	8	21DZA213H	32mm/1.26″	19.5mm/.77″	16.5mm/.65″
	9	21DZA213J	34mm/1.34″	21.5mm/.85″	18.5mm/.73″

DIMENSIONS

Notes: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple subanvils.
(The measurement accuracy in such cases is not guaranteed.)

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable washer		Sub-Anvil
Bore gage (Main body)	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t	Parts No.
511-762 511-782	1	21DZA232A	35mm/1.38″	15mm/.59″	5.5mm/.22″
	2	21DZA232B	40mm/1.57″	20mm/.79″	10.5mm/.41″
	3	21DZA232C	45mm/1.77″	25mm/.98″	15.5mm/.61″
	4	21DZA232D	50mm/1.97″	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	55mm/2.17″	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	60mm/2.36″	40mm/1.57″	30.5mm/1.20″
511-763 511-783 ( ) Used 50mm/2″ Sub-Anvil	1	21DZA232A	50mm (100mm)/1.97″ (3.94″)	15mm/.59″	5.5mm/.22″			102178 (50mm/2″)
	2	21DZA232B	55mm (105mm)/2.17″ (4.13″)	20mm/.79″	10.5mm/.41″
	3	21DZA232C	60mm (110mm)/2.36″ (4.33″)	25mm/.98″	15.5mm/.61″
	4	21DZA232D	65mm (115mm)/2.55″ (4.53″)	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	70mm (120mm)/2.74″ (4.72″)	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	75mm (125mm)/2.93″ (4.92″)	40mm/1.57″	30.5mm/1.20″
	7	21DZA232G	80mm (130mm)/3.12″ (5.12″)	45mm/1.77″”	35.5mm/1.40″
	8	21DZA232H	85mm (135mm)/3.31″ (5.31″)	50mm/1.97″”	40.5mm/1.59″	205457 205458 205459 205460	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″
	9	21DZA232J	90mm (140mm)/3.50″ (5.51″)	55mm/2.17″	45.5mm/1.79″
	10	21DZA232L	95mm (145mm)/3.69″ (5.71″)	60mm/2.36″	50.5mm/1.99″
	11	21DZA232M	100mm (150mm)/3.88″ (5.91″)	65mm/2.56″	55.5mm/2.19″
511-764 511-784	1	21DZA232A	100mm/3.94″	15mm/.59″	5.5mm/.22″
	2	21DZA232B	105mm/4.13″	20mm/.79″	10.5mm/.41″
	3	21DZA232C	110mm/4.33″	25mm/.98″	15.5mm/.61″
	4	21DZA232D	115mm/4.53″	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	120mm/4.72″	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	125mm/4.92″	40mm/1.57″	30.5mm/1.20″
	7	21DZA232G	130mm/5.12″	45mm/1.77″	35.5mm/1.40″
	8	21DZA232H	135mm/5.31″	50mm/1.97″	40.5mm/1.59″
	9	21DZA232J	140mm/5.51″	55mm/2.17″	45.5mm/1.79″
	10	21DZA232L	145mm/5.71″	60mm/2.36″	50.5mm/1.99″
	11	21DZA232M	150mm/5.91″	65mm/2.56″	55.5mm/2.19″
	12	21DZA232N	155mm/6.10″	70mm/2.76″	60.5mm/2.38″
	13	21DZA232P	160mm/6.30″	75mm/2.95″	65.5mm/2.58″

Technical Data
Accuracy: Metric models 2µm
Inch models .00008″
Repeatability: Metric models 0.5µm
Inch models .00002″
Adjacent error: Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chapter F)
21DZA000: Dial protection cover

Recommended dial indicators (see Chapter F)
Metric models: 2046SB (0.01mm)
2972TB (0.01mm – One-revolution type)
2109SB-10 (0.001mm)
2900SB-10 (0.001mm – One-revolution type)
Inch models: 2922SB (.0005″)
2977TB (.0005″ – One-revolution type)
2923SB-10 (.0001″)
2910SB-10 (.0001″ – One-revolution type)

Recommended digimatic indicators (see Chapter F)
Metric models: 543-310B (ID-C112GXB, 0.001mm)
Inch models: 543-312B (ID-C112GEXB, 0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.

Contact Points

Longer plunger stroke with no affect on accuracy.
Carbide is used for the contact point ensuring high durability and wear resistance.
This model reduces the influence of heat from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
Alternative indicators may be used in place of those recommended*.
* Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.

Optional extension rods can be attached for measuring deep holes. (For details, refer to page C-45.)
A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47).

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner	Probing depth
511-701	18-35mm	1.2mm	4N or less	6N or less	511-701	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	100mm
511-702	35-60mm	1.2mm	4N or less	6N or less	511-702			6 pcs.	4 pcs.	Not supplied	Not supplied	150mm
511-703	50-150mm	1.6mm	5N or less	10N or less	511-703			11 pcs.		1 pc.
511-704	100-160mm		5N or less	10N or less	511-704			13 pcs.		Not supplied
511-705	160-250mm		6N or less	15N or less	511-705			6 pcs.	7 pcs.	Not supplied		250mm
511-706	250-400mm		6N or less	15N or less	511-706			5 pcs.	7 pcs.	1 pc.		250mm
511-721	18-35mm	1.2mm	4N or less	6N or less	511-701	210958-10 (Graduation: 0.001mm)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	100mm
511-722	35-60mm	1.2mm	4N or less	6N or less	511-702			6 pcs.	4 pcs.	Not supplied	Not supplied	150mm
511-723	50-150mm	1.6mm	5N or less	10N or less	511-703			11 pcs.		1 pc.
511-724	100-160mm		5N or less	10N or less	511-704			13 pcs.		Not supplied
511-725	160-250mm		6N or less	15N or less	511-705			6 pcs.	7 pcs.	Not supplied		250mm
511-726	250-400mm		6N or less	15N or less	511-706			5 pcs.	7 pcs.	1 pc.		250mm
511-711	18-35mm	1.2mm	4N or less	6N or less	511-701	204658 (Graduation: 0.01mm)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	100mm
511-712	35-60mm	1.2mm	4N or less	6N or less	511-702			6 pcs.	4 pcs.	Not supplied	Not supplied	150mm
511-713	50-150mm	1.6mm	5N or less	10N or less	511-703			11 pcs.		1 pc.
511-714	100-160mm		5N or less	10N or less	511-704			13 pcs.		Not supplied
511-715	160-250mm		6N or less	15N or less	511-705			6 pcs.	7 pcs.	Not supplied		250mm
511-716	250-400mm		6N or less	15N or less	511-706			5 pcs.	7 pcs.	1 pc.		250mm
511-921	18-150mm	–	–	–	511-701 511-702 511-703	204658	21DZA000	–	–	–	–	–
511-922						210958-10
511-925-10						543-3108

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner	Probing
511-731	.7-1.4″	.047″	4N or less	6N or less	511-731	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	4″
511-732	1.4-2.5″	.047″	4N or less	6N or less	511-732			6 pcs.	4 pcs.	Not supplied	Not supplied	6″
511-733	2.0-6.0″	.063″	5N or less	10N or less	511-733			11 pcs.		1 pc.
511-734	4.0-6.5″		5N or less	10N or less	511-734			13 pcs.		Not supplied
511-735	6.5-10.0″		6N or less	15N or less	511-735			6 pcs.	7 pcs.	Not supplied		10″
511-736	10.0-16.0″		6N or less	15N or less	511-736			5 pcs.	7 pcs.	1 pc.		10″
511-751	.7-1.4″	.047″	4N or less	6N or less	511-731	292358-10 (Graduation: .0001″)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	4″
511-752	1.4-2.5″	.047″	4N or less	6N or less	511-732			6 pcs.	4 pcs.	Not supplied	Not supplied	6″
511-753	2.0-6.0″	.063″	5N or less	10N or less	511-733			11 pcs.		1 pc.
511-754	4.0-6.5″		5N or less	10N or less	511-734			13 pcs.		Not supplied
511-755	6.5-10.0″		6N or less	15N or less	511-735			6 pcs.	7 pcs.	Not supplied		10″
511-756	10.0-16.0″		6N or less	15N or less	511-736			5 pcs.	7 pcs.	1 pc.		10″
511-741	.7-1.4″	.047″	4N or less	6N or less	511-731	292258 (Graduation: .0005″)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	4″
511-742	1.4-2.5″	.047″	4N or less	6N or less	511-732			6 pcs.	4 pcs.	Not supplied	Not supplied	6″
511-743	2.0-6.0″	.063″	5N or less	10N or less	511-733			11 pcs.		1 pc.
511-744	4.0-6.5″		5N or less	10N or less	511-734			13 pcs.		Not supplied
511-745	6.5-10.0″		6N or less	15N or less	511-735			6 pcs.	7 pcs.	Not supplied		10″
511-746	10.0-16.0″		6N or less	15N or less	511-736			5 pcs.	7 pcs.	1 pc.		10″
511-931	.7-6.0″	–	–	–	511-731 511-732 511-733	292258	21DZA000	–	–	–	–	–
511-932						292358-10
511-935-10						543-3128

Notes:
1) A 50mm sub-anvil is supplied with 511-703, and a 75mm sub-anvil is supplied with 511-706.
2) A 2″ sub-anvil is supplied with 511-733, and a 3″ sub-anvil is supplied with 511-736.
3) It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)

Contact Points

DIMENSIONS

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable washer		Spanner
Bore gage (Main body)	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t	Parts No.
511-701 511-731	1	21DZA213A	18mm/.71″	5.5mm/2.17″	2.5mm/.10″	205623 205624	0.5mm/.02″ 1.0mm/.04″	102148
	2	21DZA2138	20mm/.79″	7.5mm/2.95″	4.5mm/.18″
	3	21DZA213C	22mm/.87″	9.5mm/3.74″	6.5mm/.26″
	4	21DZA213D	24mm/.94″	11.5mm/4.53″	8.5mm/.33″
	5	21DZA213E	26mm/1.02″	13.5mm/5.31″	10.5mm/.41″
	6	21DZA213F	28mm/1.10″	15.5mm/6.10″	12.5mm/.49″
	7	21DZA213G	30mm/1.18″	17.5mm/6.89″	14.5mm/.57″
	8	21DZA213H	32mm/1.26″	19.5mm/7.68″	16.5mm/.65″
	9	21DZA213J	34mm/1.34″	21.5mm/8.46″	18.5mm/.73″

Technical Data
Accuracy: Metric models 2µm
Inch models .00008″
Repeatability: Metric models 0.5µm
Inch models .00002″
Adjacent error: Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chapter F)
21DZA000: Dial protection cover

Recommended dial indicators (see Chapter F)
Metric models: 2046S8 (0.01mm)
2972T8 (0.01mm – One revolution type)
2109S8-10 (0.001mm)
2900S8-10 (0.001mm – One-revolution type)
Inch models: 2922S8 (.0005″)
2977T8 (.0005″- One-revolution type)
2923S8-10 (.0001″)
2910S8-10 (.0001″ – One-revolution type)

Recommended digimatic indicators (see Chapter F)
Metric models: 543-3108 (ID-C112GXB: 0.001mm)
Inch models: 543-3128 (ID-C112GEXB: 0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water- proof types, cannot be used.

Alternative indicators may be used in place of those recommended*.
- Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to page C-47)

SPECIFICATIONS

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Probing depth
511-209	6-10mm	0.Smm	2N or less	—	511-209	Not supplied	Not supplied	9 pcs.	Not supplied	S0mm
511-201	10-18.Smm	0.6mm	2N or less	6N or less	511-201	Not supplied	Not supplied	9 pcs.	1 pc.	100mm
511-210	6-10mm	0.Smm	2N or less	—	511-209	210958-10 (Graduation: 0.001mm)	21DZA000	9 pcs.	Not supplied	S0mm
511-203	10-18.Smm	0.6mm	2N or less	6N or less	511-201	210958-10 (Graduation: 0.001mm)	21DZA000	9 pcs.	1 pc.	100mm
511-211	6-10mm	0.Smm	2N or less	—	511-209	204658 (Graduation: 0.01mm)	21DZA000	9 pcs.	Not supplied	S0mm
511-204	10-18.Smm	0.6mm	2N or less	6N or less	511-201	204658 (Graduation: 0.01mm)	21DZA000	9 pcs.	1 pcs.	100mm

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
Order No.	Range	Stroke of contact point	Measuring force	Guide force	Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Probing depth
511-214	.24-.4″	.020″	2N or less	—	511-214	Not supplied	Not supplied	9 pcs.	Not supplied	2″
511-205	.4-.74″	.024″	2N or less	6N or less	511-205	Not supplied	Not supplied	9 pcs.	1 pc.	4″
511-212	.24-.4″	.020″	2N or less	—	511-214	292358-10 (Graduation: .0001″)	21DZA000	9 pcs.	Not supplied	2″
511-206	.4-.74″	.024″	2N or less	6N or less	511-205	292358-10 (Graduation: .0001″)	21DZA000	9 pcs.	1 pc.	4″
511-213	.24-.4″	.020″	2N or less	—	511-214	292258 (Graduation: .000S”)	21DZA000	9 pcs.	Not supplied	2″
511-207	.4-.74″	.024″	2N or less	6N or less	511-205	292258 (Graduation: .000S”)	21DZA000	9 pcs.	1 pc.	4″

DIMENSIONS

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable Washer	Spanner
Bore gage (Main body)	Marked No.	Parts No.	Indication of measuring size	L1	L13	Parts No.	Parts No.
511-209 511-214	1	952168	6.0mm/.24″	4.7mm/.19″	1.2mm/.05″	Not supplied	206709
	2	952169	6.5mm/.26″	5.3mm/.21″	1.7mm/.07″
	3	952170	7.0mm/.28″	5.8mm/.23″	2.2mm/.09″
	4	952414	7.5mm/.30″	6.3mm/.25″	2.7mm/.11″
	5	952415	8.0mm/.32″	6.8mm/.27″	3.2mm/.13″
	6	952416	8.5mm/.34″	7.3mm/.29″	3.7mm/.15″
	7	952417	9.0mm/.36″	7.8mm/.31″	4.2mm/.17″
	8	952418	9.5mm/.38″	8.3mm/.33″	4.7mm/.19″
	9	952419	10.0mm/.40″	8.8mm/.35″	5.2mm/.21″

Bore gage (Main body)	Anvil					Interchangeable Washer	Spanner
Bore gage (Main body)	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	Parts No.
511-201* 511-205	1	204356	10mm/.40″	3.8mm/.15″	2mm/.08″	204355	204354
	2	204357	11mm/.44″	4.8mm/.19″	3mm/.12″
	3	204358	12mm/.48″	5.8mm/.23″	4mm/.16″
	4	204359	13mm/.52″	6.8mm/.27″	5mm/.20″
	5	204360	14mm/.56″	7.8mm/.31″	6mm/.24″
	6	204361	15mm/.60″	8.8mm/.35″	7mm/.28″
	7	204362	16mm/.64″	9.8mm/.39″	8mm/.32″
	8	204363	17mm/.68″	10.8mm/.43″	9mm/.36″
	9	204364	18mm/.72″	11.8mm/.46″	10mm/.40″

* Equipped with an anvil fixing plate.

Close-up view of anvils and contact points

Technical Data
Accuracy: Metric models: Sµm
Inch models: .0002″
Repeatability: Metric modes: 2µm
Inch models: .00008″
Adjacent error: Metric modes: 2µm
Inch models: .00008″

Optional Accessories
– : Dial indicator (See Chapter F)
21DZA000: Dial protection cover

Recommended digimatic indicators (see Chapter F)
Metric models: 204658 (0.01mm)
2972T8 (0.01mm – One-revolution type)
210958-10 (0.001mm)
290058-10 (0.001mm – One-revolution type)
Inch models: 292258 (.000S”)
2977T8 (.000S” – One-revolution type)
292358-10 (.0001″)
291058-10 (.0001″ – One-revolution type)

Recommended digimatic indicators (see Chapter F)
Metric models: 543-3108 (ID-C112GXB: 0.001mm)
Inch models: 543-3128 (ID-C112GEXB: 0.001mm/.0000S”)
* Indicators equipped with rubber bellows, such as water- proof types, cannot be used.