Bore Gauges Archives - Gokul Traders

L C : 0.01mm
Accuracy As per BGIPL standard
Split Ball type Design
Supplied with 4 interchangeable Measuring heads. (4‐4.6 ,4.5‐5.1,5‐5.6,5.5‐6.1mm )

TYPE	READING	RANGE
K439	0.01 mm	4‐6 mm

L C : 0.01mm
Accuracy As per BGIPL standard.
2 point type Design
Supplied with 9 interchangeable anvils (extension) in step of 0.5 mm from 6‐10 mm

TYPE	READING	RANGE
K539	0.01 mm	6‐10 mm

Universal Gauge (extension compatible version) standard features:

Range 30-250mm internal / 0-215mm external 15mm anvil travel
Constant measuring pressure
Digital or mechanical readout
150mm and 500mm extensions available. Can be screwed together in multiples (up to maximum 3m recommended)
Measuring table and supports available for conversion to bench gauge for the measurement of small components
Covers approx 90% of all applications

Set Content – Standard Version

Code No.	Description	Range – Internal (mm)	Range – Internal (inch)	Range – External (mm)	Range – External (inch)
TGUDEMO2	Set with box
TGU1000	Universal Gauge – supplied boxed. Compatible with extensions	30-250	1.2-10.030	0-215	0.8-50

Universal Gauge(slide guideway version) standard features:

Range 30-335mm internal / 0-300mm external 15mm anvil travel
Slide guideway for rapid measuring contact alignment
Constant measuring pressure
Digital or mechanical readout
Measuring table and supports available for conversion to bench gauge for the measurement of small components
Covers approx 90% of all applications

Code No.	Description	Range – Internal (mm)	Range – Internal (inch)	Range – External (mm)	Range – External (inch)
TGU1000G	Universal Gauge – supplied boxed. Not Compatible with Extensions	30-335	1.2-13.20	0-300	0-11.80
TGUGSET01	Slide Guideway version-Set
TGUGSET01-BT	Slide Guideway version-Set (with Bluetooth)
TGU1000G-BT	Universal Gauge – supplied boxed (with Bluetooth). Not Compatible with Extensions	30-335	1.2-13.20	0-300	0-11.80

Irregular Spacing

Available between 16-300mm diameter to measure between odd spaced lobes.

Gun Barrel Head

Measurement of smooth bore and rifled bore gun barrels.
Major and minor diameters measured deep in to bores.

Right Angled Adaptor

Blind Bore

Standard between 2-6mm and 12.5-300mm. Between 6-12.5mm on request.

Slot Width (Large)Slot widths from 6-100mm.

Slot Width (Small)

Slot widths from 2-6mm.

Operated by a pneumatic actuator powered by a 3 bar compressed air supply – either from a compressor or a workshop air-line. The measurement data is collected by a capacities probe fitted just behind, and in constant contact with the measuring head. This direct contact ensures high-quality transducer-type accuracy, even at great depths. Measurements are taken by pressing a foot switch connected to the airline and the data is then passed automatically via cable back down the bore to the digital readout at the operator end.