Dial Depth Gauge Archives - Gokul Traders

Optimal for hole, narrow groove and step measurement.

Metric

Order No.	Range	Graduation	Accuracy	Stroke	Measuring force					Contact point*1	Extension rod*2	Indicator*3 (dial indicator)
Order No.	Range	Graduation	Accuracy	Stroke	Measuring force	W	T	Flatness	Mounting position of a dial indicator	Contact point*1	Extension rod*2	Indicator*3 (dial indicator)
7210	0 – 10mm	0.01mm	±15μm	10mm	1.4N	40mm	16mm	5μm	1	Provided with a needle point (No.137413)	—	2902SB for Depth Gage
7211	0 – 200mm					63.5mm				Provided with a carbide- tipped ball point (No.21JAA224)	5 pcs. (10, 20, 30, 30, 100mm)
7212	0 – 200mm					101.6mm					5 pcs. (10, 20, 30, 30, 100mm)
7213	0 – 210mm		±30μm	30mm	2.5N	63.5mm				Provided with a carbide- tipped ball point (No.21JAA225)	3 pcs. (30, 60, 90mm)	2952SB for Depth Gage
7214	0 – 210mm		±30μm	30mm	2.5N	101.6mm					3 pcs. (30, 60, 90mm)	2952SB for Depth Gage
7220	0 – 200mm		±15μm	10mm	1.4N	100mm	18mm		2	Provided with a carbide- tipped ball point (No.21JAA224)	5 pcs. (10, 20, 30, 30, 100mm)	2902SB for Depth Gage
7221	0 – 200mm					150mm	18mm		3		5 pcs. (10, 20, 30, 30, 100mm)
7222	0 – 10mm					ø16mm			1	Provided with a needle point (No.137413)	—
7223						ø25mm				Provided with a carbide- tipped ball point (No.21JAA224: 17mm) (No.21JAA226: 22mm)
7224						ø40mm
7231	0 – 200mm			5mm		63.5mm	16mm				5 pcs. (10, 20, 30, 30, 100mm)	1162T for Depth Gage (Back plunger type)

Inch

Order No.	Range	Graduation	Accuracy	Stroke	Measuring force					Contact point*1	Extension rod*2	Indicator*3 (dial indicator)
Order No.	Range	Graduation	Accuracy	Stroke	Measuring force	W	T	Flatness	Mounting position of a dial indicator	Contact point*1	Extension rod*2	Indicator*3 (dial indicator)
7217S	0 – 8”	.001”	±.002”	1”	2.5N	63.5mm	16mm	.0002″	1	Carbide ball point (No.21JZA242)	3 pcs. (1”, 2”, 4”)	2904SB for Depth Gage
7218S				1”	2.5N	101.6mm				Carbide ball point (No.21JZA242)	3 pcs. (1”, 2”, 4”)	2904SB for Depth Gage
7237T				.2”	1.4N	63.5mm				Provided with a carbide- tipped ball point (No.21JZA242: 17.8mm) (No.21JZA243: 22.9mm)	4 pcs. (.5”, 1”, 2”, 4”)	1168T for Depth Gage (Back plunger type)
7238T				.2”	1.4N	101.6mm					4 pcs. (.5”, 1”, 2”, 4”)	1168T for Depth Gage (Back plunger type)

DIMENSIONS

Note:

*1

Caution should be exercised when exchanging a contact point of a Depth Gage (Dial/Digimatic Indicator)

If a different size contact point is mounted, displacement of the contact point from the base contact surface will be changed and as a result, measurement range may not be
A contact point cannot be mounted to a Depth Gage, if its diameter is too large for the hole diameter of the
Parallelism adjustment with the bottom face of the base is required when mounting a flat contact point such as the flat/needle or carbide-tipped contact

*2

Caution on should be exercised when using an extension rod

If the total length of the extension rod exceeds 110mm (4.5″) use the instrument in a vertical position (contact point downward).
Use a master gage (such as Gauge blocks) to perform zero-setting when the extension rod is mounted. (Master gage is an optional accessory.)

*3

Indicators

Indicators for a Depth Gage is used for the Depth When the indicator is exchanged and extension rod is connected longer, the contact-point may incline significantly.
Code No.543-400B / 543-402B for Depth Gage has a measuring force less than 1.5N.

MARAMETER 75-P30 – DEPTH GAGE

MARAMETER 75P-30 INDICATING DEPTH GAGE

Rectangular, flat base and radiused contact point
Supplied with contact point for measuring depths from the base as a reference
Contact points for other depths are available upon request

Depth gage

Technical data

Order no.	Product type	Measuring range inches	Measuring bridge width inch	Beam width	Length of beam	Graduation value inch	Length of fixed measuring contact
2051088	75P-30	0 – .150″	0.56 inch	14 mm	64 mm	.0005″	0.13 inch

MARAMETER 75P-30M INDICATING DEPTH GAGE

Rectangular, flat base and radiused contact point
Supplied with contact point for measuring depths from the base as a reference
Contact points for other depths are available upon request

Depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Graduation value mm	Length of fixed measuring contact
2051089	75P-30M	0 – 4	0.56 inch	14 mm	64 mm	0.01 mm	3 mm

MARAMETER 75P-55M

Single and multi-purpose bases with choice of comparative or direct measurement indicators
Collet mounting allows for interchanging indicators and bases to meet a wide range of requirements
Wide range of contact points available to cover any depth measurement
Setting masters available with anvil ground to specified depth (accuracy ±2.5µm/± .0001″)

Depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge diameter mm	Beam width	Length of beam	Graduation value mm
2051093	75P-50M	2,50		19 mm	50 mm	0.01 mm
2051095	75P-51M	2,50		19 mm	76 mm	0.01 mm
2051097	75P-52M	2,50		19 mm	102 mm	0.01 mm
2051099	75P-53M	2,50		19 mm	152 mm	0.01 mm
2051101	75P-54M	2,50		19 mm	203 mm	0.01 mm
2051103	75P-55M	2,50	19 mm			0.01 mm
2051105	75P-56M	2,50	32 mm			0.01 mm

MARAMETER 75P-35 – DEPTH GAGE

MARAMETER 75P-35M

Depth gages have three interchangeable contact points, allowing inspection of depths to 76 mm / 3“
Check depths against a setting

Depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Graduation value mm	Length of fixed measuring contact
2051091	75P-35M	0 – 75	0.56 inch	14 mm	64 mm	0.01 mm	3 mm

MARAMETER 75P-35

Depth gages have three interchangeable contact points, allowing inspection of depths to 76 mm / 3“
Check depths against a setting

Technical Data

Order no.	Product type	Measuring range inches	Measuring bridge width inch	Beam width	Length of beam	Graduation value inch	Length of fixed measuring contact
2051090	75P-35	0 – 3″	0.56 inch	14 mm	64 mm	.001″	0.13 inch

MARAMETER DEPTH GAGE 75B-1

Available with dial indicator (75B-1 Models) or Maxμm®III and μMaxμm®II digital electronic indicators (EMD-75B and XLI-75B Models)
89 x 102 mm / 3.50 x 4“ hardened, ground work surface provides excellent reference surface
Four #10-32 tapped holes provided for mounting part location fixturing
Indicator vertically adjustable over 32 mm / 1.25“
Two contact points provided, 6 mm / .25“ and 32 mm / 1.25“ to check features up to 50 mm / 2“ deep

Marameter depth gage

Technical Data

Order no.	Product type	Measuring range inches	Measuring bridge width inch	Beam width	Length of beam	Graduation value inch	Measuring depth mm
2051077	75B-1	0 – 1″	3.5 inch	89 mm	102 mm	.001″	25 mm

MARAMETER DEPTH GAGE 75B-1M

Available with dial indicator (75B-1 Models) or Maxμm®III and μMaxμm®II digital electronic indicators (EMD-75B and XLI-75B Models)
89 x 102 mm / 3.50 x 4“ hardened, ground work surface provides excellent reference surface
Four #10-32 tapped holes provided for mounting part location fixturing
Indicator vertically adjustable over 32 mm / 1.25“
Two contact points provided, 6 mm / .25“ and 32 mm / 1.25“ to check features up to 50 mm / 2“ deep

Marameter depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Graduation value mm	Measuring depth mm
2051078	75B-1M	0 – 25	3.5 inch	89 mm	102 mm	0.01 mm	25 mm

MARAMETER DEPTH GAGE(XLI-75B-2)

Available with dial indicator (75B-1 Models) or Maxμm®III and μMaxμm®II digital electronic indicators (EMD-75B and XLI-75B Models)
89 x 102 mm / 3.50 x 4“ hardened, ground work surface provides excellent reference surface
Four #10-32 tapped holes provided for mounting part location fixturing
Indicator vertically adjustable over 32 mm / 1.25“
Two contact points provided, 6 mm / .25“ and 32 mm / 1.25“ to check features up to 50 mm / 2“ deep

Marameter depth gage

Technical Data

Order no.	Product type	Measuring range inches	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Measuring depth mm
2051888	EMD-75B-1			3.5 inch	89 mm	102 mm
2051889	EMD-75B-1D			3.5 inch	89 mm	102 mm
2057552	(XLI-75B-1)	0 – 1″	0 – 25	3.5 inch	89 mm	102 mm	50 mm
2057553	(XLI-75B-2)	0 – .5″	0 – 12,5				38 mm

MARAMETER 65P-40 INDICATING DEPTH GAGE WITH NEEDLE CONTACT AND V-SHAPED BASE

V-shaped base and needle contact
Movement is Push-Down style

Indicating depth gage

Technical Data

Order no.	Product type	Measuring range inches	Graduation value inch
2051075	65P-40	0 – .075″	.0005″

MARAMETER 65P-40M INDICATING DEPTH GAGE WITH NEEDLE CONTACT AND V-SHAPED BASE

V-shaped base and needle contact
Movement is Push-Down style

Indicating depth gage

Technical Data

Order no.	Product type	Measuring range mm	Length of beam	Graduation value mm
2051076	65P-40M	0 – 2	64 mm	0.01 mm

Large measuring bridge hardened and chrome plated surface
Plan grinded Measuring surface
Holder for dial indicators with Ø 8 mm shank

Technical data

Order no.	Product type	Beam width	Length of beam	Mounting hole for indicator
4494010	837	16 mm	80 mm	8 mm
4494011	837	16 mm	100 mm	8 mm
4494012	837	20 mm	150 mm	8 mm

FEATURES:

Every gauge carries a calibration certificate giving actual values
Suitable for quick and easy measurements of depths.
Base with 80 mm length: hardened and ground to a high degree of flatness
Supplied with a set of extension rods
Supplied with Tungsten Carbide contact point for longer life

dial-depth-gauge_01

dial-depth-gauge_02

dial-depth-gauge_03

Metric

Bezel Dia.	Type	Reading	Range	Graduation
56mm	K158/0	0.1mm	0-200mm	10-0
56mm	K158/3	0.01mm	0-200mm	100-0

Inch

Bezel Dia.	Type	Reading	Range	Graduation
56mm	K158/1	0.001″	0.8″	100-0

Digital

Bezel Dia.	Type	Reading	Range
56mm	K158/D	0.001 mm/0.00005″	0-200mm

Check the PDF