Dial Gauges Archives - Gokul Traders

MILLIMESS MAXΜM III DIGITAL PROBE

Probe can maxum transducers are available as replacement parts – refer to part price list for part numbers and pricing
Maxum III remote indicating units are sold without digital transducer
Any digital transducer may be used with a Maxum III probe remote indicating unit
For alternate cable lengths, extension cables or special indicator options – call Mahr’s Technical Assistance Group

Probe

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force
2033091	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033092	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033093	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033094	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033095	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033096	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033097	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033098	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N

MILLIMESS MAXΜM III DIGITAL PROBE

Maxum transducers are available as replacement parts – refer to part price list for part numbers and pricing
Maxum III remote indicating units are sold without digital transducer
Any digital transducer may be used with a Maxum III remote indicating unit
For alternate cable lengths, extension cables or special indicator options – call Mahr’s Technical Assistance Group

Probe

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force
2033091	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033092	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033093	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033094	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033095	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033096	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033097	Maxµm III	± 1,00	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N
2033098	Maxµm III	± 1,99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N

Large, high contrast digital, analog and fan display for better readability while testing flatness and concentricity as well as for searching the reversal point in bores
Interchangeable dials
Inductive absolute measuring system
Metal cast housing with robust buttons

Technical data

Order no.	Product type	Measuring range mm	Standard	IP protection category
2033001	Maxµm III	Depending on probe type	Factory standard	IP 54
2033011	Maxµm III	Depending on probe type	Factory standard	IP 54
2033021	Maxµm III	Depending on probe type	Factory standard	IP 54

Functions

RESET (set display to zero)
mm/inch
Reversal of counting direction
RANGE (switch the measuring range and resolution)
ABS (reference to the electrical zero point)
TOL (enter tolerance limit values)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
HOLD (storage of measured values)

MILLIMESS MAXΜM III INDUCTIVE DIGITAL COMPARATOR

Large, high contrast digital, analog and fan display for better readability while testing flatness and concentricity as well as for searching the reversal point in bores
Interchangeable dials
Inductive absolute measuring system
Metal cast housing with robust buttons

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Range of analog display mm	Range of analog display inches	IP protection category
2033101	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033102	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033103	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033104	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033105	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033106	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033107	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033108	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54

Functions

RESET (set display to zero)
mm/inch
Reversal of counting direction
RANGE (switch the measuring range and resolution)
ABS (reference to the electrical zero point)
TOL (enter tolerance limit values)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
HOLD (storage of measured values)

MILLIMESS MAXΜM III INDUCTIVE DIGITAL COMPARATOR

Large, high contrast digital, analog and fan display for better readability while testing flatness and concentricity as well as for searching the reversal point in bores
Interchangeable dials
Inductive absolute measuring system
Metal cast housing with robust buttons

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Range of analog display mm	Range of analog display inches	IP protection category
2033111	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033112	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033113	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033114	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033115	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033116	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033117	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033118	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033119	Maxµm III		± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N			IP 54

Functions

RESET (set display to zero)
mm/inch
Reversal of counting direction
RANGE (switch the measuring range and resolution)
ABS (reference to the electrical zero point)
TOL (enter tolerance limit values)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
HOLD (storage of measured values)

MILLIMESS MAXΜM III INDUCTIVE DIGITAL COMPARATOR

Large, high contrast digital, analog and fan display for better readability while testing flatness and concentricity as well as for searching the reversal point in bores
Interchangeable dials
Inductive absolute measuring system
Metal cast housing with robust buttons

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Range of analog display mm	Range of analog display inches	IP protection category
2033121	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033122	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033123	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033124	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033125	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033126	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54
2033127	Maxµm III	±1	± .040″	-0.199 mm	0.199 mm	-0.02 inch	0.02 inch	0.001 mm / 0.001 mm / 0.005 mm	0 inch / 0 inch / 0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 5 / ± 25 / ± 50	± .005″ / ± .025″ / ± .05″	IP 54
2033128	Maxµm III	±1.99	± .100″					0.001 mm / 0.005 mm	0 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	± 25 / ± 50	± .025″ / ± .05″	IP 54

Functions

RESET (set display to zero)
mm/inch
Reversal of counting direction
RANGE (switch the measuring range and resolution)
ABS (reference to the electrical zero point)
TOL (enter tolerance limit values)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
HOLD (storage of measured values)

MILLIMESS ΜMAXΜM II INDUCTIVE DIGITAL COMPARATOR

Inductive absolute measuring system
Large, high contrast display with numerical and scale display
Control and display unit rotatable through 270°
Zero point setting is retained even after switching off the dial indicator

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Height of digits	IP protection category
2034101	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54
2034103	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54
2034105	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54
2034107	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54

Functions

ON/OFF
PRESET (for entering a numerical value)
RESET (set display to zero)
Selectable resolution
Reversal of counting direction
<0> (tolerance GO / NO GO display mode)
mm/inch

MILLIMESS ΜMAXΜM II INDUCTIVE DIGITAL COMPARATOR

Inductive absolute measuring system
Large, high contrast display with numerical and scale display
Control and display unit rotatable through 270°
Zero point setting is retained even after switching off the dial indicator

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Height of digits	IP protection category
2034201	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54
2034203	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54
2034205	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54
2034207	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
ABS (display can be set to zero without losing reference to preset)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
Factor (adjustable)
HOLD (storage of measured values)

MILLIMESS ΜMAXΜM II INDUCTIVE DIGITAL COMPARATOR

Inductive absolute measuring system
Large, high contrast display with numerical and scale display
Control and display unit rotatable through 270°
Zero point setting is retained even after switching off the dial indicator

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Height of digits	IP protection category
2034401	µMaxµm II	±1	± .040″	-0.5 mm	0.5 mm	-0.02 inch	0.02 inch	0 mm / 0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm / 0.02 mm	0 inch / 0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch / 0.001 inch	Factory standard	0.8 N	1.1 N	8 mm	IP 54

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
ABS (display can be set to zero without losing reference to preset)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
Factor (adjustable)
HOLD (storage of measured values)

High contrast LCD
Analog display with 4 mm pointer ensures better visual recognition, ideal when checking concentricity or flatness as well as searching for the reversal point when measuring bores
Operating and display unit (bezel) can be rotated through 280°
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Linearized inductive absolute measuring system
Measuring force spring is interchangeable
Lower stop is adjustable

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Height of digits	Range of analog display mm	Range of analog display inches	IP protection category
4346100	2001	± 0.9	± .035″	-0.4 mm	0.4 mm	-0.015 inch	0.015 inch	0.001 mm / 0.001 mm / 0 mm	0 inch / 0 inch / 0 inch	Factory standard	0.7 N	0.9 N	6.5 mm	± 0,030 / ± 0,015 / ± 0,006	± .0015″ / ± .0006″ / ± .0003”	IP 54
4346910	2001	± 0.9	± .035″	-0.4 mm	0.4 mm	-0.015 inch	0.015 inch	0.001 mm / 0.001 mm / 0 mm	0 inch / 0 inch / 0 inch	Factory standard	0.7 N	0.9 N	6.5 mm	± 0,030 / ± 0,015 / ± 0,006	± .0015″ / ± .0006″ / ± .0003”	IP 54
4346911	2001	± 0.9	± .035″	-0.4 mm	0.4 mm	-0.015 inch	0.015 inch	0.001 mm / 0.001 mm / 0 mm	0 inch / 0 inch / 0 inch	Factory standard	0.7 N	0.9 N	6.5 mm	± 0,030 / ± 0,015 / ± 0,006	± .0015″ / ± .0006″ / ± .0003”	IP 54

Functions

ON/OFF
RESET (set display to zero)
0 (set the analog display to zero)
PRESET (for entering a numerical value)
mm/inch
Reversal of counting direction
RANGE (switch the measuring range and resolution)
ABS (reference to the electrical zero point)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
TOL (enter tolerance limit values)
Factor (adjustable)
Remote controlled via interface (optoRS232/USB)

High contrast LCD
Analog display with 4 mm pointer ensures better visual recognition, ideal when checking concentricity or flatness as well as searching for the reversal point when measuring bores
Operating and display unit (bezel) can be rotated through 280°
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Linearized inductive absolute measuring system
Measuring force spring is interchangeable
Lower stop is adjustable

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Measuring range 1 _beginning_ mm	Measuring range 1 _end mm	Measuring range 1 _beginning_inch	Measuring range 1 _end inch	Resolution	Resolution	Standard	Minimum measuring force	Maximum measuring force	Height of digits	Range of analog display mm	Range of analog display inches	IP protection category
4346000	2000	± 0.9	± .035″	-0.4 mm	0.4 mm	-0.015 inch	0.015 inch	0.001 mm / 0.001 mm / 0 mm	0 inch / 0 inch / 0 inch	Factory standard	0.7 N	0.9 N	6.5 mm	± 0,030 / ± 0,015 / ± 0,006	± .0015″ / ± .0006″ / ± .0003”	IP 54
4346900	2000	± 0.9	± .035″	-0.4 mm	0.4 mm	-0.015 inch	0.015 inch	0.001 mm / 0.001 mm / 0 mm	0 inch / 0 inch / 0 inch	Factory standard	0.7 N	0.9 N	6.5 mm	± 0,030 / ± 0,015 / ± 0,006	± .0015″ / ± .0006″ / ± .0003”	IP 54

Functions

ON/OFF
RESET (set display to zero)
0 (set the analog display to zero)
PRESET (for entering a numerical value)
mm/inch
Reversal of counting direction
RANGE (switch the measuring range and resolution)
ABS (display can be set to zero without losing reference to preset)

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Self contained movement, which is quick and easy to remove and replace
Box type protective housing
Constant measuring force
Adjustable limit contacts made from high grade precious metal
Limit contacts are particularly well protected against vibration and mechanical overload

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color	IP protection category	Maximum switching capacity	Maximum switching voltage	Maximum switching current	Switching accuracy with non-inductive load of 10 mA/24 V
4342100	1150 N	±1.5	0.05 mm	15-0-15	35 µm	60 µm	25 µm	17 µm	17 µm	Factory standard	1.5 N	50 mm	white		240 mW	24 V	100 mA	7 µm
4342105	1150 NT	±1.5	0.05 mm	15-0-15	35 µm	60 µm	25 µm	17 µm	17 µm	Factory standard	1.5 N	50 mm	white	IP 54	240 mW	24 V	100 mA	7 µm

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Self contained movement, which is quick and easy to remove and replace
Box type protective housing
Constant measuring force
Adjustable limit contacts made from high grade precious metal
Limit contacts are particularly well protected against vibration and mechanical overload

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color	IP protection category	Maximum switching capacity	Maximum switching voltage	Maximum switching current	Switching accuracy with non-inductive load of 10 mA/24 V
4343100	1110 N	±0.25	0.01 mm	25-0-25	6.5 µm	12 µm	5 µm	3.5 µm	3.5 µm	Factory standard	2 N	50 mm	white		240 mW	24 V	100 mA	1.5 µm
4343105	1110 NT	±0.25	0.01 mm	25-0-25	6.5 µm	12 µm	5 µm	3.5 µm	3.5 µm	Factory standard	2 N	50 mm	white	IP 54	240 mW	24 V	100 mA	1.5 µm

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Error limit Ge in inches (text)	Error limit Gges in inches (text)	Error limit Gt in inches (text)	Standard	Measuring force	Scale diameter	Dial color	IP protection category
4335900	1002 Z	± .0010″	0 inch	.001″-0-.001″	.00002″	.00003″	.000014″	Factory standard	1 N	50 mm	white
4335905	1002 ZT	± .0010″	0 inch	.001″-0-.001″	.00002″	.00003″	.000014″	Factory standard	1 N	50 mm	white	IP 54
4334900	1003 Z	± .0020″	0 inch	.002″-0-.002″	.00005″	.00006″	.000035″	Factory standard	1 N	50 mm	white
4334905	1003 ZT	± .0020″	0 inch	.002″-0-.002″	.00005″	.00006″	.000035″	Factory standard	1 N	50 mm	white	IP 54
4333900	1004 Z	± .0050″	0 inch	.005″-0-.005″	.0001″	.00012″	.00005″	Factory standard	1 N	50 mm	white
4333905	1004 ZT	± .0050″	0 inch	.005″-0-.005″	.0001″	.00012″	.00005″	Factory standard	1 N	50 mm	white	IP 54
4332900	1010 Z	± .0100″	0.001 inch	.01″-0-.01″	.00035″	.0004″	.00025″	Factory standard	1 N	50 mm	white
4332905	1010 ZT	± .0100″	0.001 inch	.01″-0-.01″	.00035″	.0004″	.00025″	Factory standard	1 N	50 mm	white	IP 54

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color	IP protection category
4332000	1010	±0.25	0.01 mm	25-0-25	7 µm	8 µm	4 µm	2 µm	2 µm	Factory standard	1 N	50 mm	white
4332005	1010 T	±0.25	0.01 mm	25-0-25	7 µm	8 µm	4 µm	2 µm	2 µm	Factory standard	1 N	50 mm	white	IP 54
4330000	1050	±1.5	0.05 mm	15-0-15	35 µm	40 µm	24 µm	10 µm	10 µm	Factory standard	1 N	50 mm	white
4330005	1050 T	±1.5	0.05 mm	15-0-15	35 µm	40 µm	24 µm	10 µm	10 µm	Factory standard	1 N	50 mm	white