Dial Gauge Indicators Archives - Page 7 of 12

High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Immediate measurements due to the Reference System
Lifter protection cap on the measuring spindle
Mounting shank and measuring spindle are both made of hardened stainless steel

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Graduation value mm	Graduation value inch	Range of analog display mm	Range of analog display inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337660	1087 R	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05	.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″	± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2	± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”	0.004 mm	0.001 mm	Factory standard	0.65 – 0.9	IP 42	8.5 mm
4337661	1087 R	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05	.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″	± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2	± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”	0.004 mm	0.001 mm	Factory standard	0.65 – 1.15	IP 42	8.5 mm
4337666	1087 R	50 mm	2″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05	.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″	± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2	± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”	0.007 mm	0.001 mm	Factory standard	1.25 – 2.7	IP 42	8.5 mm
4337670	1087 ZR	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05	.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″	± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2	± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”	0.004 mm	0.001 mm	Factory standard	0.65 – 0.9	IP 42	8.5 mm
4337671	1087 ZR	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05	.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″	± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2	± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”	0.004 mm	0.001 mm	Factory standard	0.65 – 1.15	IP 42	8.5 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 RI DIGITAL INDICATOR

Integrated wireless transmitter
High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337624	1086 Ri	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 0.9	IP 42	11 mm
4337625	1086 Ri	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 1.15	IP 42	11 mm
4337626	1086 Ri	50 mm	2″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.007 mm	0.001 mm	Factory standard	1.25 – 2.7	IP 42	11 mm
4337627	1086 Ri	100 mm	4″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.008 mm	0.001 mm	Factory standard	1.8 – 3.5	IP 42	11 mm
4337628	1086 Ri	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0 – 0	IP 42	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 RI DIGITAL INDICATOR

Integrated wireless transmitter
High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337134	1086 Ri	12.5 mm	.5″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	0.65 – 0.9	IP 42	11 mm
4337135	1086 Ri	25 mm	1″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	0.65 – 1.15	IP 42	11 mm
4337136	1086 Ri	50 mm	2″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	1.25 – 2.7	IP 42	11 mm
4337137	1086 Ri	100 mm	4″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	1.6 – 3.5	IP 42	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 WRI DIGITAL INDICATOR

Integrated wireless transmitter
High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337142	1086 WRi	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 1.4	IP 54	11 mm
4337143	1086 WRi	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	1 – 2.25	IP 54	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 WRI DIGITAL INDICATOR

Integrated wireless transmitter
High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337147	1086 WRi	12.5 mm	.5″	0.01 mm	.0005″	0.02 mm	0.02 mm	Factory standard	0.65 – 1.4	IP 54	11 mm
4337148	1086 WRi	25 mm	1″	0.01 mm	.0005″	0.02 mm	0.02 mm	Factory standard	1 – 2.25	IP 54	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 ZR DIGITAL INDICATOR

High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Lifter protection cap on the measuring spindle
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical Data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337620	1086 R	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 0.9	IP 42	11 mm
4337621	1086 R	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 1.15	IP 42	11 mm
4337622	1086 R	50 mm	2″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.007 mm	0.001 mm	Factory standard	1.25 – 2.7	IP 42	3.5 mm
4337623	1086 R	100 mm	4″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.008 mm	0.001 mm	Factory standard	1.8 – 3.5	IP 42	11 mm
4337650	1086 ZR	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 0.65	IP 42	1.15 mm
4337651	1086 ZR	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.9 – 1.15	IP 42	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 R DIGITAL INDICATOR

High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Lifter protection cap on the measuring spindle
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337130	1086 R	12.5 mm	.5″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	0.65 – 0.9	IP 42	11 mm
4337131	1086 R	25 mm	1″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	0.65 – 1.15	IP 42	11 mm
4337132	1086 R	50 mm	2″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	1.25 – 2.7	IP 42	11 mm
4337133	1086 R	100 mm	4″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	1.6 – 3.5	IP 42	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 WR – DIGITAL INDICATOR, IP 54

MARCATOR 1086 WR DIGITAL INDICATOR

High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Protection cap on the end of measuring spindle
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337640	1086 WR	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	0.65 – 1.4	IP 54	11 mm
4337641	1086 WR	25 mm	1″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0.004 mm	0.001 mm	Factory standard	1 – 2.25	IP 54	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

MARCATOR 1086 WR DIGITAL INDICATOR

High contrast LCD
Operating and display unit (bezel) can be rotated through 280°
Protection cap on the end of measuring spindle
Mounting shank and measuring spindle are both made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337145	1086 WR	12.5 mm	.5″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	0.65 – 1.4	IP 54	11 mm
4337146	1086 WR	25 mm	1″	0.01 mm	.0005″	0.02 mm	0.01 mm	Factory standard	1 – 2.25	IP 54	11 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
TOL (enter tolerance limit values)
<0> (tolerance GO / NO GO display mode)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)

High contrast LCD
Hermetically sealed protective measuring spindle cap
Mounting shank and measuring spindle are both made of hardened stainless steel

Technical Data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Error limit (mm)	Standard	Measuring force (N)	IP protection category	Height of digits
4336010	1075 R	12.5 mm	.5″	0.01 mm	.0005″	0.02 mm	Factory standard	0.5 – 1	IP 52	12 mm
4336020	1075 R	12.5 mm	.5″	0.005 mm	.0001″	0.015 mm	Factory standard	0.5 – 1	IP 52	12 mm
4336030	1075 R	12.5 mm	.5″	0.001 mm	.00005″	0.005 mm	Factory standard	0.5 – 1	IP 52	12 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
Reversal of counting direction
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)
LOCK function (key lock)
AUTO-ON / OFF

MARTEST 802 EW DIGITAL 3D TOUCH PROBE

Excellent readability thanks to combined display:
– bar graph for dynamic path information – digital display for exact readings

Can be controlled independently of a machine tool
Large working range in all axes (X, Y, Z) prevents damage to the stylus by contacting errors
Compact metal housing and long probe arm
Shockproof movement

Technical data

Order no.	Product type	Working areas, X-, Y-, Z-axis	Display ranges	Repeatability at zero point, unidirectional	Standard	IP protection category
4304300	802 EW	-2 to 4 mm	+/-2 mm	± 0,005 mm	Factory standard	IP 65

Functions

ON/OFF
Auto OFF after 2 hours

MARTEST 802 NW MECHANICAL 3D TOUCH PROBE

Large, high contrast dial face
Can be controlled independently of a machine tool
Large working range in all axes (X, Y, Z) prevents damage to the stylus by contacting errors
Compact metal housing and long probe arm
High accuracy and linearity
Shockproof and waterproof, ideal for the use on a machine with a tool changer

Technical Data

Order no.	Product type	Working areas, X-, Y-, Z-axis	Graduation value mm	Display ranges	Repeatability at zero point, unidirectional	Standard	IP protection category
4304311	802 NW	6,6 mm	0.01 mm	+/-1mm	± 0,01mm	Factory standard	IP 67

Inductive measuring system
Battery life approx. 2 years
Operating unit is protected against coolants and lubricants, protection class IP65
Combined analog and digital display
Operating and display unit (bezel) can be rotated through 360°
Satin chrome finished housing with 3 dovetail guideways
Shockproof
Movement bearings are jeweled
Automatic matching to sensing direction
Anti-magnetic
Double lever supported in ball bearings
Overload protection provided by slip clutch

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Resolution mm/inch	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	IP protection category
4305120	800 EW	± 0.4	± .015″	0.001 / .00005″	10 µm	13 µm	3 µm	5 µm	3 µm	Factory standard	0.13 N	IP 65
4306120	800 EWL	± 0.25	± .010″	0.001 / .00005″	10 µm	13 µm	5 µm	5 µm	3 µm	Factory standard	0.07 N	IP 65

Functions

ON/OFF
RESET (set display to zero)
mm/inch
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity

MARTEST – TEST INDICATOR, HORIZONTAL MODEL, MM

MARTEST 800 H TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4303200	800 H	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.25 N	27.5 mm	yellow

MARTEST – TEST INDICATOR, HORIZONTAL MODEL, INCH

MARTEST 801 H TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
2015324	801 H	± .015″	.0005″	15-0-15	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.25 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
4303950	801 H	± .015″	.0005″	15-0-15	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.25 N	1.1″	green

MARTEST – TEST INDICATOR, VERTICAL MODEL, MM

MARTEST 800 VGM TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4302250	800 VGM	± 0.1	0.002 mm	100-0-100	0.2 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	DIN 2270	0.25 N	38 mm	yellow

MARTEST 800 V TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4302200	800 V	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.2 N	27.5 mm	yellow

MARTEST – TEST INDICATOR, STANDARD MODEL, MM

MARTEST – TEST INDICATOR, STANDARD MODEL, 0.01 MM

MARTEST 800 SR TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical Data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4301200	800 SA	± 0.25	0.01 mm	25-0-25	0.5 mm	5 µm	8 µm	3 µm	5 µm	3 µm	Factory standard	0.1 N	27.5 mm	yellow
4301250	800 SGA	± 0.25	0.01 mm	25-0-25	0.5 mm	5 µm	8 µm	3 µm	5 µm	3 µm	Factory standard	0.1 N	38 mm	yellow
4305200	800 S	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.15 N	27.5 mm	yellow
4307200	800 SG	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.15 N	38 mm	yellow
4307250	800 SR	± 0.8	0.01 mm	40-0-40	0.8 mm	10 µm	14 µm	4 µm	5 µm	3 µm	Factory standard	0.15 N	38 mm	yellow

MARTEST 800 SGL TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical Data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4301300	800 SGB	± 0.5	0.01 mm	50-0-50	1 mm	10 µm	13 µm	4 µm	5 µm	3 µm	Factory standard	0.07 N	38 mm	yellow
4306200	800 SL	± 0.25	0.01 mm	25-0-25	0.5 mm	10 µm	13 µm	5 µm	5 µm	3 µm	Factory standard	0.07 N	27.5 mm	yellow
4306250	800 SGL	± 0.25	0.01 mm	25-0-25	0.5 mm	10 µm	13 µm	5 µm	5 µm	3 µm	Factory standard	0.07 N	38 mm	yellow

MARTEST – TEST INDICATOR, FOR HIGH-PRECISION MEASUREMENTS

MARTEST 800 SGE TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4308220	800 SGE	± 0.07	0.001 mm	70-0-70	0.14 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	Factory standard	0.2 N	38 mm	yellow

MARTEST 800 SRM TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4308150	800 SM	± 0.1	0.002 mm	100-0-100	0.2 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	DIN 2270	0.15 N	27.5 mm	yellow
4308200	800 SGM	± 0.1	0.002 mm	100-0-100	0.2 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	DIN 2270	0.15 N	38 mm	yellow
4308250	800 SRM	± 0.2	0.002 mm	100-0-100	0.2 mm	3 µm	5 µm	3 µm	2 µm	1.5 µm	Factory standard	0.15 N	38 mm	yellow

MARTEST – TEST INDICATOR, STANDARD MODEL, INCH

MARTEST – TEST INDICATOR, STANDARD MODEL

MARTEST 801 S TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Graduation value inch	Graduation value mm	Type of dial face	Range per rev. in mm	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
4305950	801 S		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.1″	green
4305960	801 S1		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
4307950	801 SG		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.1″	green
4307960	801 SR		± .030″	.0005″		15-0-15		.03″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
4307970	801 SGI	± 0.3	± .015″	.0005″	0.01 mm	15-0-15	0.6 mm	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
2015311	801 SGI	± 0.3	± .015″	.0005″	0.01 mm	15-0-15	0.6 mm	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015316	801 S		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
2015317	801 S1		± .015″	.001″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015318	801 SG		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015350	801 SR		± .030″	.0005″		15-0-15		.03″	.0004″	.0005″	.00016″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199

MARTEST 801 SL TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
4306950	801 SL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.1″	green
4306960	801 SGL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.5″	green
2015319	801 SL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
2015320	801 SGL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.5″	green	holding bar HB-2157 / clamp CP-2199

MARTEST 801 SM TEST INDICATORL

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
4308960	801 SM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.1″	green
4308970	801 SGM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green
4308980	801 SRM	± .008″	.0001”	4-0-4	.008″	.00012″	.0002″	.00012″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green
4308985	801 SGE	± .004″	.00005″	4-0-4	.008″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
2015321	801 SM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
2015322	801 SGM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015323	801 SGE	± .004″	.00005″	4-0-4	.008″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015351	801 SRM	± .008″	.0001”	4-0-4	.008″	.00012″	.0002″	.00012″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199