• Battery life up to 3 years
• Max. measuring speed 1,5 m/s (60”/s)
• MarConnect Data output: choose either
  – USB
  – OPTO RS232C
  – Digimatic
• High contrast liquid crystal display with 12 mm sized digits
• Sturdy heavy-duty base, easy to handle
• Hardened and lapped contact surface which produce both a smooth and even movement
• Slide and beam made of hardened stainless steel
• Hand crank for positioning and measuring
• Fine adjustment
• Locking screw
• Interchangeable scriber point, carbide tipped

Technical Data

Functions

• RESET (set display to zero)
• mm/inch
• ABS (switch between relative and absolute measurement)
• Lock/Unlock
• PRESET (for entering a numerical value)
• DATA (data transmission via connection cable)
• AUTO-ON / OFF

DIGIMAR 814 N HEIGHT MEASURING AND SCRIBING INSTRUMENT

• High accuracy
• The incremental inductive measuring system
• Measuring head with a ball bush guide
• Resistance-free measuring system
• Large, easy to read digital display
• Measuring and display unit is incorporated in the measuring head
• Data transmission via Opto RS232 C interface
• Digital preset
• Zero setting in any position
• MAX, MIN and MAX-MIN functions
• Enter tolerance limit for 1 characteristic
• Switch between mm/inch
• Easy to operate due to the hand crank on the side of the measuring head
• Constant measuring force; acting upwards or downwards as required
• Measuring head can be locked in position, ideal for scribing tasks
• With fine adjustment
• Power source independent due to being battery operated
• Universal application due to a broad range of accessories

Technical Data

Functions

• ON/OFF
• RESET (set display to zero)
• mm/inch
• PRESET (for entering a numerical value)
• MAX/MIN memory for searching the reversal point
• TIR (MAX-MIN) for testing flatness and concentricity
• TOL (enter tolerance limit values)
• Selectable resolution
• DATA (data transmission)

DIGIMAR 814 G HEIGHT MEASURING AND SCRIBING INSTRUMENT

• High accuracy
• Incremental inductive measuring system
• Measuring head with a ball bush guide
• Resistance free measuring system
• Large, easy to read digital display
• Measuring and display unit are incorporated in the measuring head
• Data transmission via Opto RS232 C interface
• Digital preset
• Zero setting in any position
• MAX, MIN and MAX-MIN functions
• Enter tolerance limit for 1 characteristic
• Switch between mm/inch
• Easy to operate due to the hand crank on the side of the measuring head
• Constant measuring force; acting upwards or downwards as required
• Measuring head can be locked in position, ideal for scribing tasks
• With fine adjustment
• Power source independent due to being battery operated
• Universal application due to broad range of accessories

Technical Data

Functions

• ON/OFF
• RESET (set display to zero)
• mm/inch
• PRESET (for entering a numerical value)
• MAX/MIN memory for searching the reversal point
• TIR (MAX-MIN) for testing flatness and concentricity
• TOL (enter tolerance limit values)
• Selectable resolution
• DATA (data transmission)

• ABS and INC measurement modes allow efficient operation.
• Rigid structure makes instrument suitable for use in severe work environments.
• The +/- measurement function widens the application range.
• Allows integration into statistical process control and measurement systems. Refer to page A-3.
• Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
• Battery life is 5,000 hours under normal
• Carbide-tipped scriber (No.900173 for 570-227 and 244, and No. 905200 for Nos. 570-230 and 248) is provided as a standard accessory. (Standard accessory: scriber cramp No. 901338 for Nos. 570-227 and 244, and No. 05GZA033 for Nos. 570-230 and 248)
• When a dial indicator or test indicator is used with 570-227, the dedicated holding bar (953639, overall length 50mm) is recommended for use. However, instrumental error may be larger because the measurement point is further from the beam.
• For precision Black Granite Surface Plates, refer to page E-51.

SPECIFICATIONS

Metric

* Excluding quantizing error

Inch/Metric

* Excluding quantizing error

DIMENSIONS

Functions
Zero-setting
+/- directional measurement
Data hold
Data output
Presetting
inch/mm reading (inch/mm models)
Preset value memory
Origin restoration
Low battery voltage alert
Counting value composition error alert

Optional accessories
For details, refer to page D-39.
Connecting cables for IT/DP/MUX
905338: SPC cable with data button (1m)
905409: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380F: SPC cable for USB-ITN-F (2m)
Connecting cables for U-WAVE-T
02AZD790F: SPC cable for U-WAVE with data button (160mm)
02AZE140F: SPC cable for footswitch

• Allows smooth elevation by the slider adjustment wheel, which is the same as the
  well-established double-column structure height gage.
• Large slider-clamp lever ensures positive and accurate clamping action.
• High durability and high accuracy are ensured by an improved column design (35x15mm).
  
• Character height of the LCD display is 10mm.
• Ergonomic and stylish base fits comfortably  in the hand.
• Due to the built-in ABSOLUTE scale function, origin setting is not required each time power is turned ON.
• Allows integration into statistical process  control and measurement systems.
  Refer to page A-3.
• Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
  Battery life is 20,000 hours under normal use• For precision Black Granite Surface Plates, refer to page E-51.

SPECIFICATIONS
Metric

* Excluding quantizing error

Inch/Metric

* Excluding quantizing error

DIMENSIONS

( ): No. 570-304

Functions

Origin-setting:
Any convenient reference surface, such as a surface plate, etc., can be stored as the absolute origin point.

Absolute measurement:
After power is turned ON, measurement can be started without zero-setting if origin-setting was previously performed. Absolute origin position can be changed by ORIGIN button.

Incremental measurement:
Allows origin setting at any arbitrary position. In this case, the origin point is not stored after turning off the power.

Data hold
Display value can be held.

Data output:
Allows integration into statistical process control and measurement systems. (Refer to page A-3.)

Low-voltage alert:
Low-voltage alert: If the battery voltage becomes low, a “B” appears in the display to alert the user before measurement is no longer possible so that the battery can be changed in good time.

Standard accessories
For 570-302, 304
No.07GZA000 Scriber
No.05GZA033 Scriber clamp
For 570-312 and 570-313, 570-314
No.900258 Scriber
No.901385 Scriber clamp

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX
905338: SPC cable with data button (1m) 905409: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380F: SPC cable for USB-ITN-F (2m)
Connecting cables for U-WAVE-T
02AZD790F: SPC cable for U-WAVE with data button (160mm)
02AZE140F: SPC cable for footswitch