• GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red.
• An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable.
• With Mitutoyo’s ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not be lost when the power is turned off. Also, reliability has been increased due to the elimination of over-speed errors.
  Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18.
• Easy-to-read large LCD readout with the character height of 8.5mm.
• External power supply type: battery change is not necessary. Power can also be supplied via the AC adapter supplied as a standard accessory.
• The resolution can be switched between 0.001mm /0.01mm (or .001” /.0005”/.0001” /.00005”).
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

SPECIFICATIONS
Metric

* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No suffix is required for JIS/100V
**Quantizing error of ±1 count is excluded.

Inch/Metric

*  To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No suffix is required for JIS/100V
**Quantizing  error of ±1 count is excluded.

DIMENSIONS

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.

Technical Data
Resolution: 0.01mm/0.001mm or .00005”/.0001”/.0005
”/.001”/0.001mm/0.01mm
Display: 6-digit LCD, sign, and analog bar with 2-color
backlight
Scale type: ABSOLUTE electrostatic linear encoder
Max. response speed: Unlimited
Measuring force: 1.8N or less (25.4mm models)
2.3N or less (50.8mm models)
Spindle orientation: Between the spindle pointing vertically
downward to the spindle horizontal
Stem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)
Power supply: 9V DC (via AC adaptor) 06AEG302
Lifting lever: 137693
* To denote your AC power cable add the following
suffixes to the order No.: A for UL/CSA, D for CEE, DC
for CCC, E for BS, K for KC, No suffix is required for
JIS/100V

Functions
Preset, Zeroset, GO/±NG judgment, Max/Min value hold,
Runout measurement, Resolution switching,
Counting direction switching, Power ON/OFF, Data output,
inch/mm conversion (inch/mm models)
Alarm: Counting value composition error, Overflow
error, Tolerance limit setting error
Optional Accessories
• Lifting cable: No.540774 (stroke 25.4mm)
• Auxiliary spindle spring:
No.02ACA571 (25.4mm/1” models)*
No.02ACA773 (50.8mm/2” models)*
• Lug-on-center back:
No.101040 (ISO/JIS type)
No.101306 (ASME/ANSI/AGD type)
* Required when orienting the indicator upside down.
• SPC cable:
No.936937 (1m)
No.965014 (2m)
• USB Input Tool Direct (2m) : No.06ADV380F
• Connecting Cables for U-WAVE-T (160mm) :
No.02AZD790D
For footswitch: No.02AZE140D
Refer to page F-60 for details.
• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators *
• Interchangeable backs for Series 2 models*
• Measuring stands
* 4 Refer to pages F-46 to F-49 for details.
* 5 Refer to page F-50 for details.
Application
Difference/Runout measurement
Example: Indicator travel from points A to D
Difference (or Total Runout) is displayed as A. Dimensions B (maximum value) and C (minimum value) can be recalled from memory with a simple key sequence.

• This new-generation digital indicator offers the excellent accuracy and functionality expected
  from the top class of indicator.
• Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution, remote control
  functionality via a handheld controller (or an RS-232C interface) and easy runout measurements
  with the well-established analog bar display.
• Functionality meets the needs of diverse measurement applications.

• With the optional remote controller, operations such as zero-setting and presetting can be made without touching the indicator body, thereby avoiding disturbance to the set-up.
• An advanced, remote control system can be implemented with the built-in RS-232 interface and a PC.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

SPECIFICATIONS
Metric

* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No suffix is required for JIS/100V
** Quantizing error of ±1 count is excluded.

Inch/Metric

* To denote your AC power cable add the following suffixes to  the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No suffix is required for JIS/100V

DIMENSIONS

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.
( ): for 30.4mm model

Technical Data
Display: 7-digit LCD, sign, and analog bar with 2-color backlight
Power supply: 6V DC (via AC adaptor) 06AEG180
* To denote your AC power cable add the following suffixes to the
order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC,
No suffix is required for JIS/100V
Positional detection method: Photoelectric-type reflection linear encoder
Maximum response speed: 1000mm/sec
Measuring force: 2.0N or less (30.4mm/1.2″type)
2.5N or less (60.9mm/2.4″type)
Spindle orientation: Between the spindle pointing vertically
downward to the spindle horizontal
Standard contact point: 901312 (ISO/JIS type)
21BZB005 (ANSI/AGD type)
Lifting lever: No.137693

Functions
Zero set, Preset, GO/±NG judgement
Max/Min value hold, Runout measurement
Resolution switching
Counting direction switching
Data output, Data hold, Function lock
inch/mm conversion (inch/mm models)
Alarm: Over speed error, Setting error, Overflow error

Optional accessories
• Lifting
Lifting knob : No.21EZA101
Lifting cable : No.540774 (stroke 30 mm)
• Lug-on-center back:
No.101040 (ISO/JIS type)
No.101306 (ASME/ANSI/AGD type)
• Remote controller : No.21EZA099
• RS-232 Connecting cable (2m) : No.21EAA131
• SPC Cable:
No.936937 (1m)
No.965014 (2m)
• USB Input Tool Direct (2m) : No.06ADV380D
• Connecting Cables for U-WAVE-T (160mm) :
No.02AZD790D
For footswitch : No.02AZE140D
Refer to page F-60 for details.
• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators (Refer to pages F-46 to F-49 for details.)
• Granite comparator stand: 215-156-10
• Comparator stand: 215-505-10

• General purpose indicator with the measuring range of 25.4mm/ 1”.
• Cost-effective and user-friendly type which is equipped with the basic functions necessary.
• The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.  Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18.
• Battery life of 20,000 hours in continuous use has been achieved.
• Easy-to-read large LCD readout with the character height of 8mm.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

SPECIFICATIONS
Metric

Inch/Metric

*Quantizing error of ±1 count is excluded
*Flat back only

DIMENSIONS

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.

Technical Data
Accuracy: Refer to the list of specifications (Excluding quantizing error of ±1 count)
Resolution: 0.01mm, .0005″/0.01mm
Display: 5-digit and sign
Scale type: ABSOLUTE electrostatic linear encoder
Max. response speed: Unlimited (Measurement by scanning cannot be performed)
Measuring force: Refer to the list of specifications
Stem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)
Standard contact point: 901312 (ISO/JIS type)
21BZB005 (ANSI/AGD type)
Battery: SR44 (1 pc.), 938882 for initial
operational checks (standard accessory)
Battery life: Approx. 20,000 hours of continuous use
Dust/Water protection level: IP42
Lifting lever: 137693

Function
Origin-set (Zeroset), Counting direction switching,
Power ON/OFF, Data output,
inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessories
• Spindle lifting cable (stroke: 10mm) : No.540774
• SPC Cable:
No.905338 (1m)
No.905409 (2m)
• USB Input Tool Direct (2m) : No.06ADV380F
• Connecting Cables for U-WAVE-T (160mm):
No.02AZD790F
For footswitch : No.02AZE140F
Refer to page F-60 for details.
• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators (Refer to pages F-46 to F-49 for details.)
• Measuring stands (Refer to page F-79 to F-85 for details.)

• Enables a tolerance judgment to be output to external equipment for a measurement result against user-defined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts.
• Output is enabled by directly connecting to external devices (sequencers, etc., for which a logical invert is available if required). The measurement and judgment results are displayed on the LCD. The judgment result is also indicated by 2 LEDs.
• A peak-detection function is equipped for measuring and judging peak values, such as runout.
• Measurements are absolute (ABS system) relative to an origin point*1 as set by the user, which holds indefinitely so does not require resetting at every power-on.
• Provided with a 4m cable.
• External power required is 5 – 24VDC.
• Dust-water protection level: Conforms to IP54.
  *1 Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18.

SPECIFICATIONS
Metric

Inch/Metric

Notes:
1) LCD readout does not rotate.
2) Max./min. holding: sample rate is 100 readings/sec; max. rate of change of reading is 100μm/sec.
3) Products with an Order No. suffixed “B” have a flat back
4) Standard contact point: 901312 (ISO/JIS type), 21BZB005 (ANSI/AGD type)
*2 Quantizing error of ±1 count is excluded.

DIMENSIONS

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.

Functions
Signal output (–NG/OK/+NG, N-ch open drain, logical invert is available), Remote control (peak start preset/zero-set),Preset, Zeroset, GO/±NG judgment (3 pairs of ABS, INC memory function) Max/Min/Runout value holding, Measurement direction switching, Power ON/OFF, inch/mm conversion (inch/mm models), Resolution switching, Scaling function f(x)=Ax, Key lock, Calibration mode (Signal output in Digimatic code format).
Alarm: Counting value composition error, Overflow error, Tolerance limit setting error
Optional accessories
• Lifting* 3
Lifting lever No.21EZA198 (ISO/JIS/DIN Type),
No.21EZA199 (ASME/ANSI/ AGD Type)
Lifting knob No.21EZA105 (ISO/JIS/DIN Type),
No.21EZA150 (ASME/ANSI/ AGD Type)
Lifting cable No.540774
• Digimatic power unit: 21EZA345
Note: To denote your AC power cable add the following
suffixes to the order No.: A for UL/CSA, D for
CEE, DC for CCC, E for KC. No suffix is required
for JIS/100VAC.
Used in the calibration mode when executing
automatic inspection using i-Checker.
In such a case, please purchase connecting cable
21EAA194 (1m), or 21EAA190 (2m).
• Contact points for Mitutoyo’s dial indicators.*
• Interchangeable backs for Series 2 models. Dust-water
protection is not guaranteed. Use the waterproof types
of Series 2 for plain backs if required.*5
• Measuring stands (Refer to page F-75 to F-80 for details.
*3 Dust-water protection is not guaranteed.
*4 Refer to pages F-46 to F-49 for details.
*5 Refer to page F-50 for details.

Output signals and LCD display

* Logical invert is available.

I/O Specifications

Note: Measurement data cannot be output.

• Calculation function operates on spindle displacement.
• Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the conversion tables previously needed for those applications where fixtures are typically used.
• Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value.
• Simple operation of many functions with five buttons and status icons.
• Wide LCD and new analog bar graph are now standard on all models.
• Sampling can be performed fifty times per second for accurate detection of maximum, minimum and run-out values.

SPECIFICATIONS
Metric

* Flat back only
Inch/Metric

* Flat back only
Note: All instruments in this series are of the flat back type.
The back is interchangeable with the standard backs for Series 2.
Refer to page F-55 for details of the optional backs.
*1 Does not include quantizing error (±1 count). Valid for resolution set to 0.001mm/’.00005″ and coefficients A=1, B=0 and C=0.
*2 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide
only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 10 months.
*3 Applies for a spindle orientation between the spindle pointing vertically downward to the spindle horizontal.
*4 The resolution can be selected from one of 12 steps (Refer to table right).

DIMENSIONS

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.

Fixture examples

Examples of measuring various features 

* The spindle position at which the ORIGIN is set. This is when the contact point is touching either the reference plane or the calibrated artefact, as shown.
** The ‘Err30’ message shown in the display is extinguished when the spindle is moved into the measurement range.
*** The value of d is chosen to suit the radius range to be measured, the stroke of the indicator and the best spindle position for the ORIGIN. Note that the value of x’ should not be allowed  to approach zero as this is a highly non-linear region of the equation and measurement accuracy will deteriorate rapidly. A spreadsheet simulation will aid selection of the best value of d for particular r, L and R values.
Notes
1. Fixtures suited to individual workpieces can be made to order.
2. Measuring accuracy is subject to fixture accuracy and workpiece form accuracy.

Functions

Calculation function f (x’) = Ax’ + B + Cx’
(x’ = x + offset)
Peak detection function (Max/Min)
Runout value Hold function (difference between max.
and min. value motion)
Peak detection sampling rate (Switchable)
10 times/sec. (FAST Mode OFF)
50 times/sec. (FAST Mode ON)
Zeroset function (INC system)
Preset function (ABS system)
Tolerance judgement function (P1, P2, P3, and INC can be stored)
Analog bar resolution selectable function
Key lock function
Display hold function (when external device is connected)
Data output function
External PC setting input function (330°)
Low battery/voltage alarm display
Error alarm display
Resolution switching function*

Resolution (mm)

Resolution (inch)

*5: Since the calculation resolution is one micrometer
(0.001mm), using sub-micrometer resolution settings
may result in the 4th-place digit being unreliable,
particularly when B is set to a very low value
and C =0. It does not change at all with certain
combinations of calculation coefficient (for example,
A = 1, B = C =0). The 3rd-place digit representing
micrometers (if displayed) is always reliable.

Optional Accessories

• Lifting
Lifting lever:
No.21EZA198 (ISO/JIS/DIN Type),
No.21EZA199 (ASME/ANSI/ AGD Type)
Lifting knob:
No.21EZA105 (ISO/JIS/DIN Type),
No.21EZA150 (ASME/ANSI/ AGD Type)
Lifting cable : No. 540774
• SPC Cable:
No.905338 (1m)
No.905409 (2m)
• USB Input Tool Direct (2m) : No.06ADV380F
• Connecting Cables for U-WAVE-T (160mm) :
No.02AZD790F
For footswitch : No.02AZE140F
Refer to page F-60 for details.
• Digimatic Mini-Processor DP-1VR : 264-504
• Parameter setup kit : No.21EZA313
Note: Parameter setting software (can be downloaded  freely from Mitutoyo website) is also required.
• Contact points for Mitutoyo’s dial indicators (Refer to pages F-51 to F-54 for details.)
• Measuring stands (Refer to page F-79 to F-85 for details.)