Lever Dial Gauges-Indicators Archives

Jeweled bearings assure higher sensitivity and accuracy. Pocket Type Dial Test Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT).
Reversible measuring direction (Clutch type).
Two holding bars are supplied. (Full sets only.)
Fully adjustable bezel/dial face.
Stylus is adjustable within 220°.
Bezel is sealed with on O-ring to keep out water and oil.

SPECIFICATIONS

DIMENSIONS

There are two types of Mitutoyo Dial Test Indicator: The non-clutch type (without a clutch lever) and the clutch type (with a two-position clutch lever)

In the non-clutch type, although the contact point may move either in the upward or downward direction, the pointer always rotates clockwise. In the clutch type, if the clutch lever is set in one position the contact point moves in the upward direction and the pointer rotates clockwise. Conversely, if the lever is set in the other position the contact point moves in the downward direction and the pointer rotates counterclockwise.

Set Configuration: Metric

Set Configuration: Inch

Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

SPECIFICATIONS

DIMENSIONS

Set Configuration: Metric

Set Configuration: Inch

Optional Accessories
––––––: Swivel clamps (See page F-63.)
––––––: Holding bars (See page F-63.)
––––––: Stems (See page F-63.)
102824: Stylus, ø1mm ball contact (carbide)
102825: Stylus, ø2mm ball contact (carbide)
102826: Stylus, ø3mm ball contact (carbide)

Specially designed for easy viewing of dial.

The dial face obliquely faces upward, allowing users to read the graduations from the user’s side. It is convenient when probing on the side of a large workpiece and the workbench is high.

Using the universal holder allows easy hole centering. The dial face always faces upward when the indicator is rotated, which makes reading easy.

SPECIFICATIONS

DIMENSIONS

Set Configuration: Metric

Set Configuration: Inch

Optional Accessories
––––––: Swivel clamps (See page F-63.)
––––––: Holding bars (See page F-63.)
––––––: Stems (See page F-63.)
––––––: Styli (See page F-63.)

Designed to probe surfaces that cannot be reached with a normal dial gauge. Useful both for alignment and for measurement purposes.
Mitutoyo’s proprietary new design permits smooth pointer operation.
Strong frame provides excellent rigidity and durability.
Non-magnetic pointer and contact point permit reliable operation even in magnetic environments.
Clear and concise wide dial face allows excellent visibility.
The surface of the crystal is hard-coated for excellent scratch resistance.
Flat crystal makes graduations easy to read. Moreover, the O-ring sealing method used for the bezel prevents water or oil penetration. (Note that this type is NOT waterproof.)
Six types are available: horizontal, horizontal (20° tilted face) vertical, parallel, universal, and pocket, allowing users to select the model most suited to their needs. · Horizontal: Standard · Horizontal (20° Tilted Face): Dial face inclined 20°, compared with the vertical type, allows easy reading. · Vertical: Best suited for centering holes under the spindle of a machine tool. · Parallel: The scale can be read from the front, with the stylus pivoting in a plane parallel to that of the dial face. · Universal: The direction of the probe movement can be freely changed. · Pocket: Compact type.
Dial test indicators with a ruby contact point are available in the horizontal (standard) type.
Benefits of ruby contact points: · Several times more resistant to wear than carbide. · Can be used on electrical discharge machines without special precautions.

Feature icons

Inductive measuring system
Battery life approx. 2 years
Operating unit is protected against coolants and lubricants, protection class IP65
Combined analog and digital display
Operating and display unit (bezel) can be rotated through 360°
Satin chrome finished housing with 3 dovetail guideways
Shockproof
Movement bearings are jeweled
Automatic matching to sensing direction
Anti-magnetic
Double lever supported in ball bearings
Overload protection provided by slip clutch

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Resolution mm/inch	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	IP protection category
4305120	800 EW	± 0.4	± .015″	0.001 / .00005″	10 µm	13 µm	3 µm	5 µm	3 µm	Factory standard	0.13 N	IP 65
4306120	800 EWL	± 0.25	± .010″	0.001 / .00005″	10 µm	13 µm	5 µm	5 µm	3 µm	Factory standard	0.07 N	IP 65

Functions

ON/OFF
RESET (set display to zero)
mm/inch
MAX/MIN memory for searching the reversal point
TIR (MAX-MIN) for testing flatness and concentricity

MARTEST – TEST INDICATOR, HORIZONTAL MODEL, MM

MARTEST 800 H TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4303200	800 H	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.25 N	27.5 mm	yellow

MARTEST – TEST INDICATOR, HORIZONTAL MODEL, INCH

MARTEST 801 H TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
2015324	801 H	± .015″	.0005″	15-0-15	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.25 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
4303950	801 H	± .015″	.0005″	15-0-15	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.25 N	1.1″	green

MARTEST – TEST INDICATOR, VERTICAL MODEL, MM

MARTEST 800 VGM TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4302250	800 VGM	± 0.1	0.002 mm	100-0-100	0.2 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	DIN 2270	0.25 N	38 mm	yellow

MARTEST 800 V TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4302200	800 V	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.2 N	27.5 mm	yellow

MARTEST – TEST INDICATOR, STANDARD MODEL, MM

MARTEST – TEST INDICATOR, STANDARD MODEL, 0.01 MM

MARTEST 800 SR TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical Data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4301200	800 SA	± 0.25	0.01 mm	25-0-25	0.5 mm	5 µm	8 µm	3 µm	5 µm	3 µm	Factory standard	0.1 N	27.5 mm	yellow
4301250	800 SGA	± 0.25	0.01 mm	25-0-25	0.5 mm	5 µm	8 µm	3 µm	5 µm	3 µm	Factory standard	0.1 N	38 mm	yellow
4305200	800 S	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.15 N	27.5 mm	yellow
4307200	800 SG	± 0.4	0.01 mm	40-0-40	0.8 mm	10 µm	13 µm	3 µm	5 µm	3 µm	DIN 2270	0.15 N	38 mm	yellow
4307250	800 SR	± 0.8	0.01 mm	40-0-40	0.8 mm	10 µm	14 µm	4 µm	5 µm	3 µm	Factory standard	0.15 N	38 mm	yellow

MARTEST 800 SGL TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical Data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4301300	800 SGB	± 0.5	0.01 mm	50-0-50	1 mm	10 µm	13 µm	4 µm	5 µm	3 µm	Factory standard	0.07 N	38 mm	yellow
4306200	800 SL	± 0.25	0.01 mm	25-0-25	0.5 mm	10 µm	13 µm	5 µm	5 µm	3 µm	Factory standard	0.07 N	27.5 mm	yellow
4306250	800 SGL	± 0.25	0.01 mm	25-0-25	0.5 mm	10 µm	13 µm	5 µm	5 µm	3 µm	Factory standard	0.07 N	38 mm	yellow

MARTEST – TEST INDICATOR, FOR HIGH-PRECISION MEASUREMENTS

MARTEST 800 SGE TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4308220	800 SGE	± 0.07	0.001 mm	70-0-70	0.14 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	Factory standard	0.2 N	38 mm	yellow

MARTEST 800 SRM TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Range per rev. in mm	Span of error fe (µm)	Total span of error fges (µm)	Hysteresis fu (µm)	Partial measuring range ft (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4308150	800 SM	± 0.1	0.002 mm	100-0-100	0.2 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	DIN 2270	0.15 N	27.5 mm	yellow
4308200	800 SGM	± 0.1	0.002 mm	100-0-100	0.2 mm	3 µm	4 µm	2 µm	2 µm	1.5 µm	DIN 2270	0.15 N	38 mm	yellow
4308250	800 SRM	± 0.2	0.002 mm	100-0-100	0.2 mm	3 µm	5 µm	3 µm	2 µm	1.5 µm	Factory standard	0.15 N	38 mm	yellow

MARTEST – TEST INDICATOR, STANDARD MODEL, INCH

MARTEST – TEST INDICATOR, STANDARD MODEL

MARTEST 801 S TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range mm	Measuring range inch	Graduation value inch	Graduation value mm	Type of dial face	Range per rev. in mm	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
4305950	801 S		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.1″	green
4305960	801 S1		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
4307950	801 SG		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.1″	green
4307960	801 SR		± .030″	.0005″		15-0-15		.03″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
4307970	801 SGI	± 0.3	± .015″	.0005″	0.01 mm	15-0-15	0.6 mm	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
2015311	801 SGI	± 0.3	± .015″	.0005″	0.01 mm	15-0-15	0.6 mm	.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015316	801 S		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
2015317	801 S1		± .015″	.001″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015318	801 SG		± .015″	.0005″		15-0-15		.03″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015350	801 SR		± .030″	.0005″		15-0-15		.03″	.0004″	.0005″	.00016″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199

MARTEST 801 SL TEST INDICATOR

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
4306950	801 SL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.1″	green
4306960	801 SGL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.5″	green
2015319	801 SL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
2015320	801 SGL	± .010″	.0005″	10-0-10	.02″	.0004″	.0005″	.0002″	.0002″	.0001″	Factory standard	0.07 N	1.5″	green	holding bar HB-2157 / clamp CP-2199

MARTEST 801 SM TEST INDICATORL

High-contrast dial face, sealed with O-ring
Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
Matt chrome plated protective casing with three integrated dovetail guide rails
Shockproof measuring mechanism
Anti-magnetic model
Automatic adjustment to the contacting direction ensures infallible readings
Ball bearing mounted double lever
Friction clutch overload protection
Stylus with carbide ball

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Pointer rotation (inches)	Deviation range fe (inches)	Total deviation range fges (inches)	Measuring value hysteresis fu (inches)	Partial measuring range ft (inches)	Repeatability fw (inches)	Standard	Measuring force	Scale diameter (inches)	Dial color	Set included
4308960	801 SM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.1″	green
4308970	801 SGM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green
4308980	801 SRM	± .008″	.0001”	4-0-4	.008″	.00012″	.0002″	.00012″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green
4308985	801 SGE	± .004″	.00005″	4-0-4	.008″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green
2015321	801 SM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.1″	green	holding bar HB-2157 / clamp CP-2199
2015322	801 SGM	± .004″	.0001”	4-0-4	.008″	.00012″	.00016″	.00008″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015323	801 SGE	± .004″	.00005″	4-0-4	.008″	.0004″	.0005″	.00012″	.0002″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199
2015351	801 SRM	± .008″	.0001”	4-0-4	.008″	.00012″	.0002″	.00012″	.00008″	.0001″	Factory standard	0.15 N	1.5″	green	holding bar HB-2157 / clamp CP-2199