Micrometers Archives - Page 6 of 21

Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.

Two-directional ratchet stop.
For ID and OD (except for 0 – 25mm) measurement, a master gage is required for adjusting the reference point.

SPECIFICATIONS

Metric

Order No.	Range Outside	Range Inside	Graduation	Accuracy	Flange
Rotating spindle
146-121	0 – 25mm	1.6 – 26.5mm	0.01mm	±10µm	06.35mm
146-122	0 – 25mm	1.6 – 26.5mm			012.7mm
146-123	25 – 50mm	26.5 – 51.5mm
146-124	50 – 75mm	51.5 – 76.5mm
146-125	75 – 100mm	76.5 – 101.5mm

Inch

Order No.	Range Outside	Range Inside	Graduation	Accuracy	Flange
Rotating spindle					0.25″
146-131	0 – 1″	.055″ – 1.05″	.001″	±.0004″	0.25″
146-132	0 – 1″	.055″ – 1.05″			0.5″
146-133	1″ – 2″	1.05″ – 2.05″
146-134	2″ – 3″	2.05″ – 3.05″
146-135	3″ – 4″	3.05″ – 4.05″

Metric

Order No.	Range Outside	Range Inside	Graduation	Accuracy	Flange
Non-rotating spindle
146-221	0 – 25mm	1.6 – 26.5mm	0.01mm	±10µm	06.35mm
146-222	0 – 25mm	1.6 – 26.5mm			012.7mm
146-223	25 – 50mm	26.5 – 51.5mm
146-224	50 – 75mm	51.5 – 76.5mm
146-225	75 – 100mm	76.5 – 101.5mm

Inch

Order No.	Range Outside	Range Inside	Graduation	Accuracy	Flange
Non-rotating spindle					0.25″
146-231	0 – 1″	.055″ – 1.05″	.001″	±.0004″	0.25″
146-232	0 – 1″	.055″ – 1.05″			0.5″
146-233	1″ – 2″	1.05″ – 2.05″
146-234	2″ – 3″	2.05″ – 3.05″
146-235	3″ – 4″	3.05″ – 4.05″

DIMENSIONS

Technical data
Parallelism: 10μm/.0004”
Standard accessories: Spanner (301336), 1 pc

Suited to the measurement of massproduced parts.
Various types of indicator can be selected according to the measurement application.
Measuring faces: Carbide

SPECIFICATIONS

Metric

Order No.	Range	Anvil movement	Measuring force*	Mass
523-141	0 – 25mm	2mm	5 – 10N	710g
523-142	25 – 50mm			810g
523-143	50 – 75mm			920g
523-144	75 – 100mm			1050g

Inch

Order No.	Range	Anvil movement	Measuring force*	Mass
523-151	0 – 1″	.078″	5 – 10N	710g
523-152	1″ – 2″			810g
523-153	2″ – 3″			920g
523-154	3″ – 4″			1050g

* Measured at the position where the anvil is retracted by 1mm from the free position without installing the indicator.

DIMENSIONS

Range	b	d
0 – 25mm	25	31
25 – 50mm	35	56
50 – 75mm	47	81
75 – 100mm	60	106

Accuracy
Flatness: 0.3µm/.000012″
Parallelism: 0.6µm/.000024″ for models up to 50mm/2″
1µm/.00004″ for models over 50mm/2″
Repeatability of indication: 0.4µm/.00002″

Typical Indicators used with gage
ID-C (0.001mm)/ 543-3908
LGF-L (0.0001mm)/ 542-181 & Counter 542-015

ABS Digimatic Indicator

Linear Gage and counter

Suited to the measurement of massproduced parts.
Designed for measurement using a stand: realizes stable measurement.
Greatly improved accuracy: indication error and graduation of 1μm.
Water-proof to protection level IP54.
Hard-coated crystal: enhanced oil and scratch resistance.
Indicator scale is large and easy-to-read.
Easily settable adjustable limit markers for GO/±NG testing.
Equipped with an elevating workpiece stop as standard.
Measuring faces: Carbide

SPECIFICATIONS
Metric

Order No.	Range	Dial graduation	Measuring force	Mass
523-121	0 – 25mm	0.001mm	5 – 10N	740g
523-122	25 – 50mm			840g
523-123	50 – 75mm			950g
523-124	75 – 100mm			1080g

Inch

Order No.	Range	Dial graduation	Measuring force	Mass
523-131	0 – 1″	.00005″	5 – 10N	740g
523-132	1″ – 2″			840g
523-133	2″ – 3″			950g
523-134	3″ – 4″			1080g

DIMENSIONS

Range	b	d
0 – 25mm	25	31
25 – 50mm	35	56
50 – 75mm	47	81
75 – 100mm	60	106

Technical Data

Indicator
Indicating range: ±0.06mm/±.0023″
Repeatability of indication: 0.4µm/.00002″
Dial indication accuracy: 1µm/.00005″
Flatness: 0.3µm/.000012″
Parallelism: 0.6µm/.000024″ for models up to 50mm/2″
measuring range
1µm/.00004″ for models over 50mm/2″
measuring range

Suited to the measurement of low-volume manufactured parts.
Easy to use when operating one-handed due to retractable anvil.
In the 25mm measuring range, the model lineup offers a choice of left or right positioning of the anvil-retraction button.
Greatly improved accuracy: indication error and graduation of 1μm.
Water-proof to protection level IP54.
Hard-coated crystal: enhanced oil and scratch resistance.
Indicator scale is large and easy-to-read.
The zero position and adjustable limit markers, for GO/±NG testing, are easily set.
Measuring faces: Carbide

SPECIFICATIONS

Metric

Order No.	Range	Indicating range	Graduation	Dial graduation	Measuring force	Anvil retraction button	Mass
510-121	0 – 25mm	±0.06mm	0.001mm	0.001mm	5 – 10N	Right side	520g
510-141	0 – 25mm					Left side	530g
510-122	25 – 50mm						670g
510-123	50 – 75mm						820g
510-124	75 – 100mm						970g

Inch

Order No.	Range	Indicating range	Graduation	Dial graduation	Measuring force	Anvil retraction button	Mass
510-131	0 – 1″	±.0023″	.0001″	.00005″	5 – 10N	Right side	520g
510-151	0 – 1″					Left side	530g
510-132	1″ – 2″						670g
510-133	2″ – 3″						820g
510-134	3″ – 4″						970g

DIMENSIONS

Technical Data
Flatness: 0.3μm/.000012”
Parallelism: 0.6μm/ .000024” for models up to 50mm/ 2”
1μm/ .00004” for models over 50mm/ 2”
Accuracy: ±2μm
Spindle feed error: 3μm/ .00015”
Dispersion of indication: 0.4μm/ .00002”
Dial indication accuracy: 1μm/ .00005”
Standard accessories: Reference bar, 1 pc (except for measuring range 0-25mm (0-1″) models) Spanner (200154), 1 pc

Workpiece stop (optional)
Realizes more stable measurement.
Three types are available to suit workpieces of different sizes.

Range	A	B
Workpiece stop A 04AZA124	016	23
Workpiece stop B 04AZA125	014	20.5
Workpiece stop C 04AZA126	014	15

Range

Workpiece stop A

04AZA124

016

Workpiece stop B

04AZA125

014

20.5

Workpiece stop C

04AZA126

014

Order No 510-121, 510-141, 510-131, 510-151

	Dmin	Dmax	C
Workpiece stop A	N/A	N/A	N/A
Workpiece stop B	4	16	5.0
Workpiece stop C	15	25	10.5

510-122 and 510-132

	Dmin	Dmax	C
Workpiece stop A	25	37	15.5
Workpiece stop B	30	42	18.0
Workpiece stop C	41	50	23.5

510-123 and 510-133

	Dmin	Dmax	C
Workpiece stop A	50	61	27.5
Workpiece stop B	54	66	30.0
Workpiece stop C	65	75	35.5

510-124 and 510-134

	Dmin	Dmax	C
Workpiece stop A	75	87	40.5
Workpiece stop B	80	92	43.0
Workpiece stop C	91	100	48.2

Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits.
Measuring faces: Carbide

SPECIFICATIONS

Metric

Order No.	Range	Graduation	Accuracy	Flatness	Parallelism
113-102	0 – 25mm	0.01mm	±3µm	0.6µm	3µm
113-103	25 – 50mm	0.01mm	±3µm	0.6µm	3µm

Technical Data
Standard accessories: Reference bar, 1 pc (except for measuring range 0-25mm (0-1″) models) Spanner (200877), 1 pc

Measures tubing thickness, shoulder edge distance, rivet head height, etc., with interchangeable anvils (flat anvil, rod anvil, V-anvil).
IP65 water/dust protection (series 317).
Equipped with Ratchet Stop for constant measuring force.

SPECIFICATIONS

Metric

Order No.	Range	Resolution	Accuracy*
Digimatic (LCD)
317-251-30	0 – 25mm	0.001mm	±4µm
317-252-30	25 – 50mm	0.001mm	±4µm

* Excluding quantizing error

Inch/Metric

Order No.	Range	Resolution	Accuracy*
Digimatic (LCD)
317-351-30	0 – 1″	.00005″/ 0.001mm	±.0002″
317-352-30	1″ – 2″	.00005″/ 0.001mm	±.0002″

* Excluding quantizing error

Metric

Order No.	Range	Graduation	Accuracy
Analog
117-101	0 – 25mm	0.01mm	±4µm
117-102	25 – 50mm	0.01mm	±4µm

Inch

Order No.	Range	Graduation	Accuracy
Analog
117-107	0 – 1″	.0001″	±.0002″
117-108	1″ – 2″	.0001″	±.0002″

DIMENSIONS

IP Codes (series 317)
Level 6: Dust-proof.
No ingress of dust allowed.
Level 5: Protected against water jets.
Water projected in jets against the enclosure
from any direction shall have no harmful effects.
Technical data

Flatness: Spindle face 0.6μm
Anvil face 2μm
Parallelism: 3μm

Battery for series 317
SR44 (1 pc), 938882, for initial operational checks
(standard accessory)
Battery life: Approx. 2.4 years under normal use
(for series 317)
Length standard: Electromagnetic rotary sensor
(for series 317)
Standard accessories: Reference bar, 1 pc
(except for measuring range 0-25mm (0-1″) models)
Spanner (200877), 1pc (for series 117-XXX)
Spanner (301336), 1 pc (for series 317-XXX)

Optional accessories
Connecting cables (series 317)
1m: 05CZA662
2m: 05CZA663
USB Input Tool Direct
USB-ITN-B (2m): 06ADV380B
Connecting cables for U-WAVE-T
02AZD790B 160mm
For foot switch: 02AZE140B
Refer to page B-68 for details.

Accessories

Order No.	Item
201216	Flat anvil (standard accessory)
201217	Rod anvil (standard accessory for 117-101/ 117-107/317-251-30/317-351-30)
201379	Rod anvil (standard accessory for 117-102/ 117-108/317-252-30/317-352-30)
201218	V-anvil (optional)
950758	Base for 25mm (optional)

Measures the height of crimp contacts.
Equipped with Ratchet Stop for constant measuring force.
IP65 water/dust protection (digital model).
Model 342-451 is the Quickmike type, which provides a speedy spindle feed of 10mm per thimble rotation, which enables widely differently sized features to be measured quickly.

SPECIFICATIONS

Metric

Order No.	Range	Resolution	Accuracy*
Digimatic (LCD)
342-271-30	0 – 20mm	0.001mm	±3µm
Quickmike (LCD)
342-451	0 – 15mm	0.001mm	±3µm

* Excluding quantizing error

Inch/Metric

Order No.	Range	Resolution	Accuracy*
Digimatic (LCD)
342-371-30	0 – .8″	.00005″/ 0.001mm	±.00015″

* Excluding quantizing error

Metric

Order No.	Range	Graduation	Accuracy
Mechanical counter model
142-402	0 – 25mm	0.01mm	±3µm
142-403	0 – 25mm	0.001mm	±3µm

Metric

Order No.	Range	Graduation	Accuracy
Analog
112-401	0 – 25mm	0.01mm	±3µm

DIMENSIONS

IP Codes (series 342-271-30, 342-371-30)
Level 6: Dust-proof.
No ingress of dust allowed.
Level 5: Protected against water jets.
Water projected in jets against the enclosure
from any direction shall have no harmful effects.

Battery for series 342
SR44 (1 pc), 938882, for initial operational checks
(standard accessory)
Battery life: Approx. 2.4 years under normal use
(for series 342-271-30/342-371-30)
Approx. 3 years under normal use
(for series 342-451)
Length standard: Electromagnetic rotary sensor
(for series 342-271-30/342-371-30)
Electrostatic capacity absolute sensor
(for series 342-451)
Standard accessories:
Spanner (301336), 1 pc (except for series 342-451)

Optional accessories
Connecting cables (digital model)
1m: 05CZA662
2m: 05CZA663
USB Input Tool Direct
USB-ITN-B (2m): 06ADV380B
Connecting cables for U-WAVE-T (digital model)
02AZD790B (160mm)
For foot switch: 02AZE140B
Connecting cables (Quickmike type)
1m: 937387
2m: 965013

USB Input Tool Direct
USB-ITN-E (2m): 06ADV380E
Connecting cables for U-WAVE-T (Quickmike type)
02AZD790E 160mm
For foot switch: 02AZE140E
Refer to page B-68 for details.

Designed for measuring wire thickness.
Measurable wire dia.: 10mm or less
Measuring faces: Carbide
Equipped with Ratchet Stop for constant measuring force.

SPECIFICATIONS

Metric

Order No.	Range	Graduation	Accuracy
147-401	0 – 10mm	0.01mm	±3µm

Inch

Order No.	Range	Graduation	Accuracy
147-402	0 – .4″	.0001″	±.00015″

DIMENSIONS

Technical Data
Flatness: 0.6μm/.000024”
Parallelism: 1.3μm/.00005”

Standard accessories: Spanner (200168), 1 pc
Spanner (202863), 1pc

Measures hub thickness and shoulders inside a bore.
Measuring faces: Carbide
Equipped with Ratchet Stop for constant measuring force.

SPECIFICATIONS

Metric

Order No.	Range	Graduation	Accuracy
147-301	0 – 25mm	0.01mm	±2µm
147-302	25 – 50mm
147-303	50 – 75mm
147-304	75 – 100mm		±3µm

Inch

Order No.	Range	Graduation	Accuracy
147-351	0 – 1″	.001″	±.0001″
147-352	1″ – 2″
147-353	2″ – 3″
147-354	3″ – 4″		±.00015″

DIMENSIONS

Technical data
Flatness: 0.6μm/.000024”
Parallelism: (2+R/100)μm, R = max. range (mm)
[.00008”+.00004’(R/4)]” R = max. range (mm)
*fraction rounded up
Standard accessories: Reference bar, 1 pc
(except for measuring range 0-25mm (0-1″) models)
Spanner (301336), 1 pc

Measures the width, height, and depth of can seams.

SPECIFICATIONS

Metric

Order No.	Range	Graduation	Accuracy	Remarks
147-103	0 – 13mm	0.01mm	±3µm	for steel cans
147-105				for aluminum cans
147-202				for spray cans

Inch

Order No.	Range	Graduation	Accuracy	Remarks
147-104	0 – .5″	.001″	±.00015″	for steel cans
147-106				for aluminum cans
147-201				for spray cans

DIMENSIONS

Technical Data