Offset Calipers Archives

Specially designed to measure hole Centerto-Center and Edge-to-Center distances.
Provided with jaws on the back of the slider, measurements can be read easily from above.

A digital model is IP67 Absolute type. (Refer to page D-8 for Absolute function.)
Direct reading of pitch measurements is available due to the offset value setting function.
Allows integration into statistical process control and measurement systems for models with measurement data output connector.Refer to page A-3.
Dedicated calibration inspection tools are available.

SPECIFICATIONS

Metric Edge-to-center distance type

Order No.	Range	Accuracy
573-118-10	10.1 – 200mm	±0.10mm
573-119-10	10.1 – 300mm	±0.15mm

Metric Center-to-center distance type

Order No.	Range	Accuracy
573-116-10	10.1 – 200mm	±0.10mm
573-117-10	10.1 – 300mm	±0.15mm

DIMENSIONS

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electrostatic capacity linear encoder Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory) Battery life: Approx. 3.5 years under normal use

Optional accessories
For details, refer to page D-39. 959143: Data hold unit Connecting cables for IT/DP/MUX
959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380C: SPC cable for USB-ITN-C (2m)
Connecting cables for U-WAVE-T
02AZD790C: SPC cable for U-WAVE with data button(160mm)
02AZE140C: SPC cable for footswitch
05FAJ735: Centerline caliper inspection gage

Specially designed for hole Center-to-Center measurements on the same, or offset, planes.
Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)
Direct reading of pitch measurements is available due to the offset-value setting function.
Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

SPECIFICATIONS

Metric Digital model

Order No.	Range	Accuracy
573-605	10.1 – 160mm	±0.03mm
573-615*	10.1 – 160mm	±0.03mm
573-606	10.1 – 210mm	±0.03mm
573-616*	10.1 – 210mm	±0.03mm
573-608	10.1 – 310mm	±0.04mm
573-618*	10.1 – 310mm	±0.04mm

* Without thumb roller

Inch/Metric Digital model

Order No.	Range	Accuracy
573-705	.404 – 6.4″	±.0015″
573-706	.404 – 8.4″	±.0015″
573-708	.404 – 12.4″	±.0015″

Metric Analog model

Order No.	Range	Accuracy
536-105	10.1 – 150mm	±0.05mm
536-106	10.1 – 200mm	±0.05mm
536-107	10.1 – 300mm	±0.08mm

DIMENSIONS

Range	W	t
10 – 150mm	75	3
10 – 200mm	75	3
10 – 300mm	100	3.8

Range	W	t
10 – 160mm/.4 – 6.4”	75	3.5
10 – 210mm/.4 – 8.4”	75	3.5
10 – 310mm/.4 – 12.4”	100	3.8

Technical Data
Accuracy: Refer to the list of specifications.
(excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005″/0.01mm Graduation**: 0.05mm
Display*: LCD
Scale type*: ABSOLUTE electromagnetic induction linear encoder
Max. response speed*: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life*:Approx. 3 years under normal use (1 year: 310mm model)
Dust/Water protection level*: IP67 (IEC 60529)***
* Digital models ** Analog models *** This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories for Digital Models
For details, refer to page D-39. 959143: Data hold unit Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct

06ADV380A: SPC cable for USB-ITN-A (2m)

Connecting cables for U-WAVE-T

02AZD790A: SPC cable for U-WAVE with data button (160mm)

02AZE140A: SPC cable for footswitch

05FAJ735: Centerline caliper inspection gage

The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.
Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)
Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

SPECIFICATIONS

Metric Digital model

Order No.	Range	Accuracy
573-601	0 – 150mm	±0.02mm
573-611*	0 – 150mm	±0.02mm
573-602	0 – 200mm	±0.02mm
573-612*	0 – 200mm	±0.02mm
573-604	0 – 300mm	±0.03mm
573-614*	0 – 300mm	±0.03mm

* Without thumb roller

Inch/Metric Digital model

Order No.	Range	Accuracy
573-701	0 – 6″	±.001″
573-702	0 – 8″	±.001″
573-704	0 – 12″	±.0015″

Metric Analog model

Order No.	Range	Accuracy
536-101	0 – 150mm	±0.05mm
536-102	0 – 200mm	±0.05mm
536-103	0 – 300mm	±0.08mm

DIMENSIONS

Order No.	Model	Range	D	G	J	N	W
573-601	Digital model	0 – 150mm	40	10	30	10	95
573-602		0 – 200mm	50	10	38.5	10	95
573-604		0 – 300mm	64	15	51	15	135
536-101	Analog model	0 – 150mm	40	10	30	10	95
536-102		0 – 200mm	50	10	38.5	10	95
536-103		0 – 300mm	64	15	51	15	135

Technical Data
Accuracy: Refer to the list of specifications.
(excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005″/0.01mm Graduation**: 0.05mm
Display*: LCD
Scale type*: ABSOLUTE electromagnetic induction linear encoder
Max. response speed*: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life*: Approx. 3 years under normal use (1 year: 300mm model)
Dust/Water protection level*: IP67 (IEC 60529)***
* Digital models
** Analog models
*** This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories for Digital Model
For details, refer to page D-39.
959143: Data hold unit Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch