Plunger Dial Indicators Archives

Peak hold type Special dial Indicator gauge

A mechanism holds the pointer and the spindle at the position of maximum depression and hence displays the maximum value.
* Clearance of peak hold: push the nut in the direction of the arrow indicated in the dimensional drawing below.

DIMENSIONS

SPECIFICATIONS
Metric

Order No.		Graduation	Range (range/rev)	Accuracy				Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	Overall	Retrace	1/10 Rev	1 Rev	Repeat- ability	Dial reading	Measuring force
2046S-80	2046SB-80	0.01mm	10mm (1mm)	15µm	—	5µm	10µm	—	±0-100	5.0N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

FEATURES
Metric

Adjustable hand dial indicators

The hand position can be adjusted independently of the position of the spindle by rotating the top knob.

DIMENSIONS

* Contact points, other than dedicated types, cannot be installed.
* The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. For this reason, if you need to install an optional contact point with an outside diameter smaller than 7mm, use a washer (with outside diameter of at least 7mm, inside diameter of 3mm, and thickness of approx. 0.5mm) placed between the contact point and the spindle.

SPECIFICATIONS
Metric

Order No.		Graduation	Range (range/rev)	Accuracy				Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	Overall	Retrace	1/10 Rev	1 Rev	Repeat- ability	Dial reading	Measuring force
2048S-10	2048SB-10	0.01mm	10mm (1mm)	15µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

Order No.		Graduation	Range (range/rev)	Accuracy		Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	First 1 Rev / 2.5 Rev / 10 Rev	Retrace	Repeat- ability	Dial reading	Measuring force
2915S-10	2915SB-10	.001”	.5” (.1”)	±.001” / ±.001” / ±.001	.0002	±.0002	±0-100	1.8N or less
2918S-10	2918SB-10	.001”	.5” (.1”)	±.001” / ±.001” / ±.001	.0002	±.0002	0-50-0	1.8N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

FEATURES

Metric

Inch

Dial indicators with a large-diameter dial face for easy reading.
Models with longer measuring ranges are also available.
All types are supplied with limit markers and a bezel clamp as standard.
Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
The bezel clamp and lifting lever (optional)*1 can be attached to either the right or left side. These parts can be easily installed and removed without tools.
*1: Can be attached only to Code No. 3046S, 3047S, 3050S, 3109S-10 and 4046S.

DIMENSIONS

Order No.	A	B	C	D	E	F	G	H	I
3046S	61.2	75.5	78	17.7	21	15.9	20.6	71	9
3047S	61.2	75.5	78	17.7	21	15.9	20.6	71	9
3050S	52.6	94	78	17.7	21	25.9	29.1	71	9
3052S-19*	72.9	104.3	78	17.7	21	25.9	39.4	71	9
3058S-19*	81.9	142.3	78	17.7	21	43.9	59.4	71	9
3060S-19*	120.9	202.3	78	17.7	21	73.9	89.4	71	9
3062S-19*	141.9	243.3	78	17.7	21	94.9	109.4	71	9
3109S-10	61.2	79	78	17.7	21	25.9	14.1	71	9
4046S	61.2	84	92	21.5	21	18.9	19.1	71	9

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.
* The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. For this reason, if you need to install an optional contact point with an outside diameter smaller than 7mm, use a washer (with outside diameter of at least 7mm, inside diameter of 3mm, and thickness of approx. 0.5mm) placed between the contact point and the spindle.

Order No.	A	B	C	D	E	F	G	H	I
3414S	52.6	73.4	78	17.7	19	12.6	21.8	71	9
3415S	52.6	73.4	78	17.7	19	12.6	21.8	71	9
3416S	52.6	86.1	78	17.7	19	12.6	34.5	71	9
3417S	52.6	86.1	78	17.7	19	12.6	34.5	71	9
3424S-19*	84	149.3	78	17.7	19	50.6	59.7	71	9
3426S-19*	123	198.1	78	17.7	19	73.9	85.2	71	9
3428S-19*	144	244.5	78	17.7	19	94.9	110.6	71	9
3803S-10	61.2	59.7	78	17.7	19	12.6	8.1	71	9
3802S-10	61.2	59.7	78	17.7	19	12.6	8.1	71	9
3052S-11*	72.9	102.4	78	17.7	19	25.9	37.5	71	9
3058S-11*	81.9	147.1	78	17.7	19	50.6	57.5	71	9
4887S-19*	123	198.1	92	21.5	19	66.9	85.2	71	9

SPECIFICATIONS
Metric

Order No.		Graduation	Range (range/rev)	Accuracy				Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	Overall	Retrace	1/10 Rev	1 Rev	Repeat- ability	Dial reading	Measuring force
3046S	3046SB	0.01mm	10mm (1mm)	15µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less
3047S	3047SB	0.01mm	10mm (1mm)	15µm	3µm	5µm	10µm	3µm	0-50-0	1.4N or less
3050S	3050SB	0.01mm	20mm (1mm)	20µm	5µm	8µm	15µm	4µm	±0-100	2.0N or less
3052S-19	3052SB-19	0.01mm	30mm (1mm)	25µm	7µm	10µm	15µm	5µm	±0-100	2.5N or less
3058S-19	3058SB-19	0.01mm	50mm (1mm)	30µm	8µm	10µm	15µm	5µm	±0-100	3.0N or less
3060S-19*	3060SB-19*	0.01mm	80mm (1mm)	45µm	9µm	12µm	20µm	5µm	±0-100	3.0N or less
3062S-19*	3062SB-19*	0.01mm	100mm (1mm)	50µm	9µm	12µm	20µm	5µm	±0-100	3.2N or less
3109S-10	3109SB-10	0.001mm	1mm (0.2mm)	5µm	2µm	2µm	4µm	0.5µm	0-100-0	1.5N or less
4046S	4046SB	0.01mm	10mm (1mm)	15µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less

*1 Use in a vertical position (contact point downward) for the long stroke model.
*2 Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

Order No.		Graduation	Range (range/rev)	Accuracy		Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	First 1 Rev / 2.5 Rev / 10 Rev	Retrace	Repeat- ability	Dial reading	Measuring force
3414S	3414SB	.001”	.5” (.1”)	±.001” / ±.001” / ±.001”	.0002”	±.0002”	±0-100	1.8N or less
3415S	3415SB	.001”	.5” (.1”)	±.001” / ±.001” / ±.001”	.0002”	±.0002”	0-50-0	1.8N or less
3416S	3416SB	.001”	1” (.1”)	±.001” / ±.001” / ±.002”	.0002”	±.0002”	±0-100	1.8N or less
3417S	3417SB	.001”	1” (.1”)	±.001” / ±.001” / ±.002”	.0002”	±.0002”	0-50-0	1.8N or less
3424S-19	3424SB-19	.001”	2” (.1”)	±.001” / ±.001” / ±.002” / ±.003” (20Rev)	.00033”	±.0002”	±0-100	3.0N or less
3426S-19*	3426SB-19*	.001”	3” (.1”)	±.001” / ±.001” / ±.002” / ±.003” (20Rev) / ±.005” (Over 20Rev)	.00033”	±.0002”	±0-100	3.0N or less
3428S-19*	3428SB-19*	.001”	4” (.1”)	±.001” / ±.001” / ±.002” / ±.003” (20Rev) / ±.005” (Over 20Rev)	.00033”	±.0002”	±0-100	3.2N or less
3802S-10	3802SB-10	.0001”	.025” (.01”)	±.0001” / ±.0001” / —	.0001”	±.00003”	0-10	2.0N or less
3803S-10	3803SB-10	.0001”	.025” (.01”)	±.0001” / ±.0001” / —	.0001”	±.00003”	0-5-0	2.0N or less
4887S-19*	4887SB-19*	.001”	3” (.1”)	±.001” / ±.001” / ±.002” / ±.003” (20Rev) / ±.005” (Over 20Rev)	.00033”	±.0002	±0-100	3.0N or less

FEATURES
Metric

Inch

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact.
This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions.
The dead zone in red indicates “accuracy not guaranteed” .
One revolution type Back plunger dial gages are also available. (Refer to pages F-49 to F-50 for details.)

SPECIFICATIONS
Metric

Order No.		Graduation	Range (range/rev)	Accuracy				Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	Overall	Retrace	1/10 Rev	1 Rev	Repeat- ability	Dial reading	Measuring force
1929S	1929SB	0.01mm	1mm (1.4mm)	11µm	4µm	7µm	—	3µm	50-0-50	1.4N or less
1929S-62	1929SB-62	0.01mm	1mm (1.4mm)	11µm	4µm	7µm	—	3µm	50-0-50	1.4N or less
1900S-10	1900SB-10	0.001mm	0.1mm (0.14mm)	5µm	2µm	2.5µm	—	1µm	50-0-50	1.5N or less
1900S-72	1900SB-72	0.001mm	0.1mm (0.14mm)	5µm	2µm	2.5µm	—	1µm	50-0-50	1.5N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

Order No.		Graduation	Range (range/rev)	Accuracy		Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	First 1 Rev / 2.5 Rev / 10 Rev	Retrace	Repeat- ability	Dial reading	Measuring force
1909S-62	1909SB-62	.0005”	.04” (.056”)	±.0005” / — / —	.00016”	±.0001”	20-0-20	1.4N or less
1910S-72	1910SB-72	.0001”	.006” (.008”)	±.0001” / — / —	.0001”	±.00003”	3-0-3	1.5N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

FEATURES
Metric

Inch

DIMENSIONS

Order No.	A	B	C	D	E	F	G	H	I
1909S-62	32.5	41.7	40	14.5	19	12.8	8.9	38	6.6
1910S-72	32.5	40.8	40	14.5	19	12.8	8	38	6.6

Order No.	A	B	C	D	E	F	G	H	I
1929S	32.5	47.5	40	14.5	20	13.8	13.7	38	6.6
1929S-62	32.5	47.5	40	14.5	20	13.8	13.7	38	6.6
1900S-10	32.5	53.5	40	14.5	20	16.8	16.7	38	6.6
1900S-72	32.5	53.5	40	14.5	20	16.8	16.7	38	6.6

Compact dial indicators with bezel diameters of ø40mm for restricted-space applications in gaging jigs.

SPECIFICATIONS
Metric

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

FEATURES
Metric

Inch

DIMENSIONS

Compact dial indicators with bezel diameters of ø31 or ø36mm for restricted-space applications in gaging jigs.

DIMENSIONS

Order No.	A	B	C	D	E	F	G	H	I
1911T-10	15.5	42	31	12.9	19.2	15	11.5	30	5.9
1913T-10	15.5	39.5	31	12.9	19.2	15	9	30	5.9
1003T	18	40.3	36	13	15	9.5	12.8	32	6
1921T-10	15.5	40	31	12.9	19.2	15	9.5	30	6.8
1923T-10	15.5	38.3	31	12.9	19.2	15	7.8	30	6.8
1925T-10	15.5	37.5	31	12.9	19.2	15	7	30	6.8

Notes
1) Limit hands, bezel clamps and lifting levers cannot be installed.
2) The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. For this reason, if you need to install an optional contact point with an outside diameter smaller than 7mm, use a washer (with outside diameter of at least 7mm, inside diameter of 3mm, and thickness of approx. 0.5mm) placed between the contact point and the spindle.

SPECIFICATIONS
Metric

Order No.		Graduation	Range (range/rev)	Accuracy				Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	Overall	Retrace	1/10 Rev	1 Rev	Repeat- ability	Dial reading	Measuring force
1911T-10	1911TB-10	0.01mm	2.5mm (1mm)	12µm	4µm	8µm	10µm	3µm	0-50-0	1.8N or less
1913T-10	1913TB-10	0.002mm	0.5mm (0.2mm)	6µm	2.5µm	2.5µm	5µm	1µm	0-100-0	1.8N or less
1003T	1003TB	0.01mm	4mm (1mm)	13µm	4µm	8µm	11µm	3µm	0-50-0	1.4N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

Order No.		Graduation	Range (range/rev)	Accuracy		Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	First 1 Rev / 2.5 Rev / 10 Rev	Retrace	Repeat- ability	Dial reading	Measuring force
1921T-10	1921TB-10	.001”	.1” (.04”)	±.001” / ±.001” / —	.0002”	±.0002”	0-20-0	1.8N or less
1923T-10	1923TB-10	.0005”	.05” (.02”)	±.0005” / ±.005” / —	.00016”	±.0001”	0-10-0	1.8N or less
1925T-10	1925TB-10	.0001”	.025” (.01”)	±.0002” / ±.0002” / —	.0001”	±.00003”	0-5-0	1.8N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.