• 13 roughness parameters
• With probe position indicator
• Connected with printer via bluetooth (code ISR-C100-PRINTER)
• Can display roughness values, profile, and curve
• Memory of maximum 100 results
• Automatic power off

Download PDF

• Unit: μm, μin
• Automatic power off

Download PDF

• 21 roughness parameters
• Connected with printer via bluetooth
• Display roughness values, profile and curve
• Memory of maximum 100 results
• Automatic power off

Download PDF

• Roughness tester can be operated by mobile phone (only android system) or computer
• Data can be output to Excel by connecting with computer via bluetooth or USB cable
• Support bluetooth printer
• 22 roughness parameters
• Meet ISO, DIN, ANSI, JIS standards
• Display roughness values, profile and curve
• Memory of maximum 100 data and waveform
• Built-in lithium battery, working time more than 50 hours
• Automatic power off

Download PDF

• Mobile and stationary measuring instrument.
• Roughness and waviness measurements.
• Traversing lengths up to 26 mm.
• Over 50 R, W and P surface parameters.
• Automatic choice of cut-off and traversing length in accordance with international standards.
• Dynamic calibration function.
• Cable and the Bluetooth connection between the drive unit and evaluation instrument (4 m).
• Magnetic probe holder (breakaway probe) BFW 250.
• Motorized probe zero setting (max. 7.5 mm).

Technical Data

Applications

Machine building

• • Bearings, shafts, racks, valves

Automotive industry

• • • Steering, brake system, gearbox, crankshaft, camshaft, cylinder head, cylinder block, turbocharger

                                   Steel industry

• • • • Measurement of sheet metal surfaces
      • Measurement of the roller surface

                    Medicine

    • • Surface roughness measurement for hip and knee endoprostheses
      • 
        Aerospace
        
        • Turbine components

Accessories

Measuring stand

• ST-D, ST-F, and ST-G
• Holder on measuring stand

Other accessories

• CT 120 XY table, parallel vise, V-block
• Assorted probe arms for the BFW probe system

Shipment

• MarSurf M 400 evaluation instrument
• MarSurf SD 26 drive unit including BFW 250 probe system
• Standard probe arm (6852403)
• 1 roll of thermal paper
• Wide-range power supply unit with 3 adapters
• 2 USB cables (for connecting to the PC and the M 400)
• Operating instructions
• With a Case

• Bright, illuminated color display
• Automatic selection of filter and traversing length conforming to standards
• Integrated thermal graphics printer with high print quality
• Log printed by pressing a button
• Data transfer of results and profiles via USB interface to your PC
• Evaluation of most common parameters as well as characteristic curves, parameter lists (e.g. material ratio curve)
• Printing of R profile (ISO/ASME/JIS), P profile (motif), material ratio curve, measuring record
• Measuring units (μm/μinch) and standards (ISO/Jis/asme/motif) are selectable
• Tolerance monitoring
• Integrated memory for results of up to 40000 measurements and 30 profiles
• Setting of asymmetric intersection lines for peak count calculation
• Individual sampling lengths and short cutoff can be selected
• Key pad lock and/or password protection for instrument settings
• Built in rechargeable battery with power management
• Integrated roughness standard for the standard pick-up PHT 6-350
• Dynamic calibration function
• Date and/or time of measurement
• MarSurf PS1/M300 Explorer Software for recording measurements

Technical Data

• First portable roughness measuring unit with the option of wireless (Bluetooth) connection between the evaluation unit and drive unit
• Easy to use, with high-resolution color display and menu-driven user guidance
• Integrated standard in the drive unit
• Large measuring range – 350 µm
• Automatic profile detection and corresponding selection of filter and traversing length conforming to standards
• Integrated memory for results of up to 40,000 measurements and 30 profiles
• 16 languages (including 3 Asian languages)
• Integrated thermal graphics printer with high print quality
• Log printed by pressing a button or automatically
• Data transfer of results and profiles via USB interface to your PC
• Evaluation of most common parameters as well as characteristic curves, parameter lists (e.g. material ratio curve)
• Integrated memory for results and profiles
• Tolerance monitoring
• Printing of R profile (ISO/ASME/JIS), P profile (MOTIF), material ratio curve, measuring record
• The setting of asymmetric intersection lines for peak count calculation
• Measuring units (μm/μin) and standards (ISO/JIS/ASME/MOTIF) are selectable
• Individual sampling lengths and short cutoff can be selected
• Lock for instrument settings
• Built-in rechargeable battery with power management
• AC adapter with interchangeable international plug adapters
• Date and time of measurement
• Suitable for use with the stationary measuring station
• For use with PHT probe range
• MarSurf PS1/M300 Explorer Software for recording measurements

Technical data

• Durable cast aluminum housing to provide years of accurate and reliable surface finish gaging
• Can be used to measure any one of four, selectable, parameters: Ra, Ry, Rmax, Rz
• Review any of the parameters after the measurement is complete
• Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/0.030“
• Operates in any position – horizontal, vertical, and upside down
• Four switchable probe positions – axial (folded) or at 90°, 180° or 270°
• Even difficult to reach surfaces such as inside and outside diameters are accessible
• MarConnect data output for easy SPC processing that is compatible with the most common data processing systems
• Easy to read LCD readout presents the measured roughness value, in micro inches or micrometers, within half a second after the surface is traversed
• Out of range (high or low) and ‘low battery’ signals are displayed
• Improved digital calibration process eliminates scandrivers and potentiometers to simplify and enhance the calibration process
• Improved battery life with standard 9V battery

Technical Data

Applications

• Pocket-sized, economically priced, completely portable instrument
• Performs traceable surface roughness measurements on a wide variety of surfaces
• Can be used confidently in production, on the shop floor and in the laboratory

• Attachment for interrupted surface measurement
  No.178-034
  Best suited for measurement of the flat surface of a workpiece that has partial indentations and steps and that is hard to set the drive unit. Combination use with the magnet type specimen holder (Option: No.12AAA910) further improves the ease of operation.

• Attachment for measuring inside bores and holes
  No.178-035
  Greatly facilitates measurement of internal wall surfaces of, for example, cylinder-block bores.
  • Applicable diameter: ø75 to 95mm
  • Accessible depth: 30 to 135mm

Digimatic mini-processor
It is possible to process Digimatic data output from the Surftest SJ series with the DP-1VR. This compact, hand-held device can provide printouts of measurement data and various statistical analyses results such as histograms, D-charts, and X bar R control charts.

• Digimatic mini-processor DP-1VR No.264-504
• Digimatic connecting cable
  Connecting cable 1m: No.936937
  Connecting cable 2m: No.965014
  Note: The symbol ʻµmʼ is not printable, but measurement results can still be printed out without setting the measurement unit.

Introduction of the specified communication program for Surftest SJ-210/310/410 series, 500, SV-2100

System environments supporting the operation

• OS: Windows XP-SP3, Windows Vista, Windows 7 , Windows 8

• Spreadsheet software: Microsoft Excel 2000, Microsoft Excel 2007, Microsoft Excel 2002, Microsoft Excel 2010, Microsoft Excel 2003, Microsoft Excel 2013.

Optional USB cable is required.

• USB communication cable for SJ-210: No.12AAL068
• USB communication cable for SJ-310/410*: No.12AAD510
• USB communication cable for SJ-500/SV-2100*: No.12AAH490
  *Equivalent to Type AB for the communication between the device and host

Input tool for measurement data input units
Using this tool, measurement data from the Surftest SJ series can be instantly imported into commercially-available spreadsheet software through a USB or PS-2 keyboard socket on a PC. Refer to the Catalog (No.4279) for more details

• Input tool
  ・USB keyboard signal conversion model
  IT-012U: No.264-012-10
  USB-ITN-D (Direct type): No.06ADV380D
• Digimatic connecting cable
  Connecting cable 1m: No.936937
  Connecting cable 2m: No.965014

* Refer to pages A-7 to A-9 for details of U-WAVE.
* Refer to pages A-5 to A-6 for details of the input tool

Setting attachments*

Improves measurement efficiency by allowing the setup of multiple workpieces of the same type and the positioning of hard-to-access features of a workpiece.
*Not available for the transverse tracing drive unit

• Attachment for the measurement of cylinder shaft direction
  No.178-033
  The V-width is adjustable to the cylinder diameter, facilitating axial measurement of a wide range of cylinder diameters.
  • Applicable diameter: ø5 to 150mm
  

Printer for SJ-210
Assessed profiles and calculation results and curves can be printed out by connecting the SJ-210-dedicated printer, which is palm sized (W×D×H: 93×125×70mm) and can run on an internal battery.

• Power supply can be selected. (AC adapter or battery pack)
• Printable items: Measurement conditions, calculation results, assessed profile, bearing area curve (BAC), amplitude distribution curve (ADC), GO/NG judgment
• Printer for SJ-210
  (Provided with the connecting cable and printer paper (×6 packs))
  No.178-421
• Printer paper
  Standard type (x5 packs): No.270732
  High-durability type (x5 packs): No.12AAA876

Surface Roughness / Contour Analysis Software FORMTRACEPAK
Measurement data from the SJ-210/310/410 series can be imported into FORMTRACEPAK running on a desktop type surface roughness tester via an optional memory card to perform a more advanced analysis if required.

Detector

• Standard detectors

*Tip radius /Tip angles

• Small hole detectors

*Tip radius /Tip angles

• Extra small hole detectors

*Tip radius /Tip angles

• Gear-tooth surface detectors

*Tip radius /Tip angles

• Deep groove detectors

*Tip radius /Tip angles

Optional Accessories for Drive Units

• Nosepiece for flat surfaces

No.12AAA217 *Standard accessory for the standard/retractable drive unit of the SJ-310 series
*Not available for the transverse tracing drive unit

• V-type adapter

No.12AAE644 *Transverse tracing type standard accessory.
*Dedicated to the transverse tracing drive unit.

• Extension rod (50mm)

No.12AAA210 *Not available for the transverse tracing drive unit

• Adapter for flat surface No.12AAA219
  *Not available for the transverse tracing drive unit

• Magnetic stand adapter
  No.12AAA221 (Shaft diameter of the mounting section: ø8mm)
  No.12AAA220 (Shaft diameter of the mounting section: ø9.5mm)

• Nosepiece for cylindrical surfaces
  No.12AAA218
  *Standard accessory for the standard/retractable drive unit of the SJ-310 series
  *Not available for the transverse tracing drive unit

• Point-contact adapter
  No.12AAE643
  *Transverse tracing type standard accessory.
  *Dedicated to the transverse tracing drive unit

• Extension cable (1m)(Note: Only one rod can be used.)
  No.12BAA303
  *For the connection between the calculation display unit and drive unit

• Support feet set
  No.12AAA216
  *Standard accessory for the standard/retractable drive unit of the SJ-310 series
  *Not available for the transverse tracing drive unit *Adjustment range is 28mm from bottom face.
  
• Height gage adapter
  Note:Dedicated to the height gage whose scriber mounting dimensions are 9 ×9 mm