• Specially designed for standard size gauge blocks over 125mm which have two coupling holes on the body: coupling of two long gauge blocks and attachment of jaws is possible.
• These accessories can also be used for CERA blocks.

SPECIFICATIONS

* Only 1 pc is supplied for each Order No. However, half round jaw, plain jaw, and tram point are supplied in a pair. (2 pcs).

Connector A

Used for directly coupling  two long gauge blocks.

Connectors B and C

Used for clamping jaws to the ends of one or more long gauge blocks in conjunction with adapters (619036). The length is highly adjustable to accommodate the variable length of a stack of regular gauge blocks that would be wrung to one of the long gauge blocks to achieve the required gaging size.

Connector D

Used for attaching a long gauge block directly to the base.

Connector E

Used for attaching a long gauge block to the base over a stack of regular gauge blocks wrung between the base and long gauge block. The length is highly adjustable to accommodate  the variable length of the stack.

Base

Flatness tolerance of the finished surface 0.5µm
Flatness tolerance of the bottom surface 1µm

Plain jaw

Flatness tolerance of the finished surface 1µm

Half round jaw

Flatness tolerance of the finished surface 0.5µm

Scriber point

Flatness tolerance of the finished surface 0.5µm

Assortment of accessories for gauge blocks
For inside and outside measurement inspection of 300 to 1000  mm (every 100mm) gauge blocks, select the appropriate combination of a rectangular gauge block and an accessory.

*1 Provided with adapters  (2 pcs)
*2 2 pcs/set

Setting a dial test indicator to a long-gauge- block stack attached to the base with a D-type connector

• Individual steel gauge made of alloy steel
• Meet ISO3650
• Individual steel gauge supplied with manufacturer inspection certificate

Check the PDF