• Long jaw Vernier Caliper for measuring hard-to-reach workpiece features.
• Inside and outside measurements can be read directly from the upper and lower vernier scales.

SPECIFICATIONS

Metric with inside measurement vernier scale

Order No.	Range*	Accuracy	Graduation	Remarks
534-113	0 (10.1) – 300mm	±0.04mm	0.02mm	with fine adjustment
534-114	0 (20.1) – 500mm	±0.06mm
534-115	0 (20.1) – 750mm	±0.08mm
534-116	0 (20.1) – 1000mm	±0.10mm

* ( ): Minimum dimension in inside measurement

Inch with inside measurement vernier scale

Order No.	Range*	Accuracy	Graduation	Remarks
534-117	0 (.304”) – 12″	±.002″	.001”	with fine adjustment
534-118	0 (.804”) – 20″	±.003″
534-119	0 (.804”) – 30″	±.004″
534-120	0 (.804”) – 40″

* ( ): Minimum dimension in inside measurement

DIMENSIONS

• The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get-at workpiece features.
• Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

SPECIFICATIONS

Metric Digital model

Order No.	Range	Accuracy
573-601	0 – 150mm	±0.02mm
573-611*	0 – 150mm	±0.02mm
573-602	0 – 200mm	±0.02mm
573-612*	0 – 200mm	±0.02mm
573-604	0 – 300mm	±0.03mm
573-614*	0 – 300mm	±0.03mm

* Without thumb roller

Inch/Metric Digital model

Order No.	Range	Accuracy
573-701	0 – 6″	±.001″
573-702	0 – 8″	±.001″
573-704	0 – 12″	±.0015″

Metric Analog model

Order No.	Range	Accuracy
536-101	0 – 150mm	±0.05mm
536-102	0 – 200mm	±0.05mm
536-103	0 – 300mm	±0.08mm

DIMENSIONS

Order No.	Model	Range	D	G	J	N	W
573-601	Digital model	0 – 150mm	40	10	30	10	95
573-602		0 – 200mm	50	10	38.5	10	95
573-604		0 – 300mm	64	15	51	15	135
536-101	Analog model	0 – 150mm	40	10	30	10	95
536-102		0 – 200mm	50	10	38.5	10	95
536-103		0 – 300mm	64	15	51	15	135

Technical Data
Accuracy: Refer to the list of specifications.
(excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005″/0.01mm Graduation**: 0.05mm
Display*:    LCD
Scale type*: ABSOLUTE electromagnetic induction linear encoder
Max. response speed*: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life*: Approx. 3 years under normal use (1 year: 300mm model)
Dust/Water protection level*: IP67 (IEC 60529)***
* Digital models
** Analog models
*** This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories for Digital Model
For details, refer to page D-39.
959143: Data hold unit Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch

• Long jaws for measuring hard-to-reach workpiece features.
• Inside and outside measurements can be read directly from the upper and lower vernier scales.

SPECIFICATIONS

Metric with inside measurement vernier scale

Order No.	Range*	Accuracy	Graduation	Remarks
534-109	0 (10.1) – 300mm	±0.07mm	0.05mm	without fine adjustment
534-110	0 (20.1) – 500mm	±0.13mm

* ( ): Minimum dimension in inside measurement

Metric/Inch with metric/inch double scale

Order No.	Range*	Accuracy	Graduation	Remarks
534-101	0 (10.1) – 300mm	±0.07mm	0.05mm/ 1/128”	+10mm/.394” to reading in inside measurement without fine adjustment
534-105		±0.04mm	0.02mm/.001”
534-102	0 (20.1) – 500mm	±0.13mm	0.05mm/ 1/128”	+20mm/.787” to reading in inside measurement without fine adjustment
534-106		±0.06mm	0.02mm/.001”
534-103	0 (20.1) – 750mm	±0.16mm	0.05mm/ 1/128”
534-107		±0.08mm	0.02mm/.001”
534-104	0 (20.1) – 1000mm	±0.20mm	0.05mm/ 1/128”
534-108		±0.10mm	0.02mm/.001”

* ( ): Minimum dimension in inside measurement

• IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.)
• The range of applications can be expanded by using interchangeable jaws (optional).
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.
• Provided with preset function for setting a desired starting point, which allows direct readout of offset measurement.

SPECIFICATIONS

Metric

Order No.	Range	Accuracy
552-181-10	0 – 450mm	±0.04mm
552-182-10	0 – 600mm
552-183-10	0 – 1000mm	±0.05mm
552-184-10	0 – 1500mm	±0.09mm
552-185-10	0 – 2000mm	±0.12mm

Inch/Metric

Order No.	Range	Accuracy
552-191-10	0 – 18″	±.002″
552-192-10	0 – 24″
552-193-10	0 – 40″
552-194-10	0 – 60″	±.004″
552-195-10	0 – 80″	±.005″

Optional accessories
Interchangeable jaws

SPECIFICATIONS
Standard Type

Order No.	Components	a	b
07CZA056	Right (07CAA044), Left (07CAA045)	28mm (1.1″)	30mm (1.2″)

* 1 set

Inside Point Type

Order No.	Components	a	b
07CZA058	07CZA041 x 2pcs.	25mm	50mm
07CZA059	07CZA048 x 2pcs.	1″	2″

Scriber Type

Order No.	Components	a	b
07CZA055	Right (07CZA042), Left (07CZA043)	8mm	30mm
07CZA061	Right (07CZA042), Left (07CZA049)	031″	1.2″

Surface Plate Type

Order No.	a	b
07CZA044	90mm (3.5″)	28mm (1.1″)

Centerline Type

Order No.	Components	a	b
07CZA057	07CZA039 x 2pcs.	30mm	30mm
07CZA060	07CZA047 x 2pcs.	1.2″	1.2″

Note: Entering the appropriate offset value enables the display to indicate the correct measurement value inscribed on the jaws, which should be installed so that this inscription is visible from the display side of the caliper.
Scriber for height gages
Order No. 07GZA000

Type	Applicable calipers	Range	Accuracy whenattached to the caliper
Standard type	552-181-10 (552-191-10)	0 – 450mm ( 0-18”)	±0.06mm ( ±.0025”)
	552-182-10 (552-192-10)	0 – 600mm ( 0-24”)
	552-183-10 (552-193-10)	0 – 1000mm ( 0-40”)	±0.07mm ( ±.0030”)
	552-184-10 (552-194-10)	0 – 1500mm ( 0-60”)	±0.11mm( ±.0045”)
	552-185-10 (552-195-10)	0 – 2000mm ( 0-80”)	±0.14mm ( ±.0055”)
Inside point type	552-181-10 (552-191-10)	Inside: 50.1-500mm ( 2.004-20”)	±0.09mm( ±.0035”)
		Outside: 0 – 450mm ( 0-18”)
	552-182-10 (552-192-10)	Inside: 50.1-650mm ( 2.004-26”)
		Outside: 0 – 600mm( 0-24”)
	552-183-10 (552-193-10)	Inside: 50.1-1050mm ( 2.004-42”)	±0.10mm ( ±.0040”)
		Outside: 0 – 1000mm ( 0-40”)
	552-184-10 (552-194-10)	Inside: 50.1-1550mm ( 2.004-62”)	±0.14mm ( ±.0055”)
		Outside: 0 – 1500mm ( 0-60”)
	552-185-10 (552-195-10)	Inside: 50.1-2050mm( 2.004-82”)	±0.17mm ( ±.0070”)
		Outside: 0 – 2000mm( 0-80”)
Centerline type	552-181-10 (552-191-10)	30.1 – 480mm ( 1.204-19.2”)	±0.08mm ( ±.0030”)
	552-182-10 (552-192-10)	30.1 – 630mm ( 1.204-25.2”)
	552-183-10 (552-193-10)	30.1 – 1030mmm ( 1.204-41.2”)	±0.09mm ( ±.0035”)
	552-184-10 (552-194-10)	30.1 – 1530mm ( 1.204-61.2”)	±0.13mm( ±.0055”)
	552-185-10 (552-195-10)	30.1 – 2030mm ( 1.204-81.2”)	±0.16mm ( ±.0065”)
Scriber type	552-181-10 (552-191-10)	30 – 480mm ( 1.2-19.2”)	±0.10mm ( ±.0040”)
	552-182-10 (552-192-10)	30 – 630mm ( 1.2-25.2”)
	552-183-10 (552-193-10)	30 – 1030mm ( 1.2-41.2”)	±0.11mm ( ±.0045”)
	552-184-10 (552-194-10)	30 – 1530mm ( 1.2-61.2”)	±0.15mm ( ±.0060”)
	552-185-10 (552-195-10)	30 – 2030mm ( 1.2-81.2”)	±0.18mm ( ±.0070”)
Surface plate	552-181-10 (552-191-10)	0 – 450mm ( 0-17.7”)	±0.10mm( ±.0040”)
	552-182-10 (552-192-10)	0 – 600mm ( 0-23.7”)
type
	552-183-10 (552-193-10)	0 – 1000mm ( 0-39.4”)	±0.11mm ( ±.0045”)
+
Scriber type for
	552-184-10 (552-194-10)	0 – 1500mm ( 0-59.4”)	±0.15mm ( ±.0060”)
height gages
	552-185-10 (552-195-10)	0 – 2000mm ( 0-79.6”)	±0.18mm ( ±.0070”)
	552-181-10 (552-191-10)	Inside: 25.1 – 475mm ( 1.004-19″)
		Outside: 0 – 450mm ( 1-18”)	±0.12mm ( ±.0050”)
	552-182-10 (552-192-10)	Inside: 25.1 – 625mm ( 1.004-25″)
Surface plate		Outside: 0 – 600mm ( 1-24”)
	552-183-10 (552-193-10)	Inside: 25.1 – 1025mm ( 1.004-41″)	±0.13mm ( ±.0055”)
type
+		Outside: 0 – 1000mm ( 1-40”)
Inside point type
	552-184-10 (552-194-10)	Inside: 25.1 – 1525mm ( 1.004-62″)	±0.17mm ( ±.0070”)
		Outside: 0 – 1500mm ( 1-60”)
	552-185-10 (552-195-10)	Inside: 25.1 – 2025mm ( 1.004-81″)	±0.20mm ( ±.0080”)
		Outside: 0 – 2000mm ( 1-80”)
	552-181-10 (552-191-10)	15 – 465mm ( 0.6-18.6”)	±0.11mm ( ±.0045”)
Surface plate	552-182-10 (552-192-10)	15 – 615mm ( 0.6-24.6”)
type
	552-183-10 (552-193-10)	15 – 1015mm ( 0.6-40.6”)	±0.12mm ( ±.0050”)
+
	552-184-10 (552-194-10)	15 – 1515mm ( 0.6-60.6”)	±0.16mm ( ±.0065”)
Centerline type
	552-185-10 (552-195-10)	15 – 2015mm ( 0.6-80.6”)	±0.19mm ( ±.0075”)

Application examples

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life: Approx. 5,000 hours in continuous use
Dust/Water protection level: IP66 (IEC 60529)* Standard accessory: Jaw clamps (2 pcs.), 05GZA033
* Although these models are IP66 rated, care should be taken to dry tool after use.

Functions
Zero-setting
Data hold
Offsetting
Presetting
Data output
Low-power and low-voltage alert
Counting value composition error
Automatic power on/off, inch/mm reading (inch/mm models)

Standard accessories (2 pcs)

 

Jaw clamps: No.05GZA033 

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting  cables  for  U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button(160mm)
02AZE140A: SPC cable for footswitch

• IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.)
• Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy
552-150-10	0 – 450mm (20.1 – 470mm)	±0.06mm
552-151-10	0 – 600mm (20.1 – 620mm)
552-152-10	0 – 1000mm (20.1 – 1020mm)	±0.07mm
552-153-10	0 – 1500mm (20.1 – 1520mm)	±0.11mm
552-154-10	0 – 2000mm (20.1 – 2020mm)	±0.14mm

* ( ): Dimension in inside measurement

Inch/Metric

Order No.	Range*	Accuracy
552-160-10	0 – 18″ (.504 – 18.5″)	±.0025”
552-161-10	0 – 24″ (.504 – 24.5″)
552-162-10	0 – 40″ (1.004 – 40.5″)	±.003”
552-163-10	0 – 60″ (1.004 – 60.5″)	±.0045”
552-164-10	0 – 80″ (1.004 – 80.5″)	±.0055”

* ( ): Dimension in inside measurement

DIMENSIONS

Range	E	F	H	K	L	N	P	U
0 – 450mm (0-18″)	91.8	65.5	25	173	680	89	8	10 (.25″)
0 – 600mm (0-24″)					830
0 – 1000mm (0-40″)	113.8	73	32	170.5	1280	110	12	10 (.5″)
0 – 1500mm (0-60″)					1790
0 – 2000mm (0-80″)					2300

( ): Inch/Metric type

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm
Material of jaws: Stainless Steel Hardened
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 5,000 hours in continuous use
Dust/Water protection level: IP66 (IEC 60529)*
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
*This model is not waterproof type. Please wipe away the wet after use.

Functions Zero-setting Data hold Offsetting Presetting Data output
Low-power and low-voltage alert Counting value composition error Automatic power on/off, inch/mm reading (inch/mm models)

Optional accessories
For details, refer to page D-39.
Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting  cables  for  U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch

• IP66 Absolute Digital Caliper (Refer to page D-8 for Absolute function.)
• Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.Refer to page A-3.

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy
552-302-10	0 – 450mm (20.1 – 470mm)	±0.04mm
552-303-10	0 – 600mm (20.1 – 620mm)	±0.04mm
552-304-10	0 – 1000mm (20.1 – 1020mm)	±0.05mm
552-305-10	0 – 1500mm (20.1 – 1520mm)	±0.09mm
552-306-10	0 – 2000mm (20.1 – 2020mm)	±0.12mm

* ( ): Dimension in inside measurement

Inch/Metric

Order No.	Range*	Accuracy
552-312-10	0 – 18″ (.504 – 18.5″)	±.002″
552-313-10	0 – 24″ (.504 – 24.5″)	±.002″
552-314-10	0 – 40″ (1.004 – 40.5″)	±.002″
552-315-10	0 – 60″ (1.004 – 60.5″)	±.004″
552-316-10	0 – 80″ (1.004 – 80.5″)	±.005″

* ( ): Dimension in inside measurement

DIMENSIONS

Range	D	E	G	H	J	L	N	R	S	t	U
0-450mm	100	91.8	35	25	65	640	41.2	R10	18	8	10
(0-18”)											(.25”)
0-600mm	100	91.8	35	25	65	790	41.2	R10	18	8	10
(0-24”)											(.25”)
0-1000mm	150	113,8	45	32	100	1230	62.8	R10	24	8	10
(0-40”)											(.5”)
0-1500mm	150	113.8	45	32	100	1740	62.8	R10	24	8	10
(0-60”)											(.5”)
0-2000mm	150	113.8	45	32	100	2250	62.8	R10	24	8	10
(0-80”)											(.5”)

Optional accessories

Metric

	No. 552-302-10, 552-155-10, 552-303- 10 and 552-156-10.	No. 552-304-10 and 552-305-10
Clamp box (1 pair)	No.914053	No.914054
Distance measurement jaw (1 pair)	No.914055
Point ID measuring attachment	No.914057

Inch/Metric

	No. 552-312-10, 552-165-10, 552-313-10 and 552-166-10	No. 552-314-10, 552-315-10, 552-316-10
Clamp box (1 pair)	No.914053	No.914054
Distance measurement jaw (1 pair)	No.914056
Point ID measuring attachment	No.914058

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm Material of jaws: Stainless Steel Hardened Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory) Battery life: Approx. 5,000 hours in continuous use Dust/Water protection level: IP66 (IEC60529)* Standard accessory: Jaw clamps (2 pcs.), 05GZA033

* This model is not waterproof type. Please wipe away the wet after use.

Functions
Zero-setting
Data hold
Offsetting
Presetting
Data output
Low-power and low-voltage alert Counting value composition error Automatic power on/off, inch/mm reading (inch/mm models)

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting  cables  for  U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch

• Offers a resolution of 0.01mm with corresponding accuracy.
• Incorporates an Absolute measurement system. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.Refer to page A-3.
• ID measurement value: displayed value + (the minimum inside measurement value mentioned below). OFFSET switch allows to input a compensation value so that the measurement value can be read directly (Code No. 551-301-10, 551-331-10, 551-311-10 and 551-341-10). Preset function allows to set a desired starting point (Code No. 551331-10 and 551-341-10).
• Tips of the outside measurement jaw are relieved for easy measurement of thin parts.

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy	Remarks
551-301-10	0 – 200mm (10.1 – 210mm)	±0.03mm	IP67
551-331-10	0 – 300mm (10.1 – 310mm)	±0.04mm	IP67, with offset/preset function for easy inside measurement
551-204-10	0 – 500mm (20.1 – 520mm)	±0.06mm	—
551-206-10	0 – 750mm (20.1 – 770mm)	±0.06mm
551-207-10	0 – 1000mm (20.1 – 1020mm)	±0.07mm

* ( ): inside measurement
Note: Series 551 is not equipped with a depth bar.

Inch/Metric

Order No.	Range*	Accuracy	Remarks
551-311-10	0 – 8″ (.404” – 8.4”)	±.0015″	IP67
551-341-10	0 – 12″ (.404” – 12.4”)	±.002″	IP67, with offset/preset function for easy inside measurement
551-224-10	0 – 20″ (.504” – 20.5”)	±.0025″	—
551-226-10	0 – 30″ (.504” – 30.5”)	±.0025″
551-227-10	0 – 40″ (1.004” – 41”)	±.003″

* ( ): inside measurement
Note: Series 551 is not equipped with a depth bar.

DIMENSIONS

Range	A	D	J	S
0 – 200mm	30	60	43	8
0 – 300mm	40.1	90	68	10
0 – 500mm	56	150	115	15
0 – 750mm	56	150	115	15
0 – 1000mm	56	150	115	20

Jaw thickness:
3mm for 0 – 200mm model
3.8mm for 0 – 300mm model
6mm for 0 – 500mm and 0 – 750mm models
8mm for 0 – 1000mm model

Technical Data
Accuracy: Refer to the list of specifications.
(excluding quantizing error for digital models) Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed:Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 3 years under normal use (1 year: 300mm models) (3.5 years: over 300mm models)
Dust/Water protection level: IP67* (models up to 300mm)
*This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories For details, refer to page D-39.
959143: Data hold unit Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)*
05CZA625: SPC cable with data button (2m)*

959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)*
06ADV380C: SPC cable for USB-ITN-C(2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)*
02AZE140A: SPC cable for footswitch* 02AZD790C: SPC cable for U-WAVE with data button (160mm)
02AZE140C: SPC cable for footswitch
For IP67 models (up to 300mm)

• Offers a resolution of 0.01mm with corresponding accuracy.
• Incorporates an Absolute measurement system. No need to reset the origin after switching (Refer to page D-8 for a description of Absolute measurement.)
• Code 550-301-10, 550-331-10, 550-311-10 and 550-341-10: IP67 (These models are not a waterproof type. Therefore a rustproofing shall be applied after use.)
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.
• ID measurement value: displayed value + (the minimum inside measurement value mentioned below). OFFSET switch allows to input a compensation value so that the measurement value can be read directly (Code Nos. 550-301-10, 550-331-10, 550-311-10 and 550-341-10). Preset function allows to set a desired starting point (Code Nos. 550- 331-10 and 550-341-10).

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy	Remarks
550-301-10	0 – 200mm (10.1 – 210mm)	±0.03mm	IP67
550-331-10	0 – 300mm (10.1 – 310mm)	±0.04mm	IP67, with offset/preset function for easy inside measurement
550-203-10	0 – 450mm (20.1 – 470mm)	±0.05mm	—
550-205-10	0 – 600mm (20.1 – 620mm)	±0.05mm	—
550-207-10	0 – 1000mm (20.1 – 1020mm)	±0.07mm	—

* ( ): Inside measurement
Note: Series 550 is not equipped with a depth bar.

Inch/Metric

Order No.	Range*	Accuracy	Remarks
550-311-10	0 – 8″ (.404” – 8.4”)	±.0015″	IP67
550-341-10	0 – 12″ (.404” – 12.4”)	±.002″	IP67, with offset/preset function for easy inside measurement
550-223-10	0 – 18″ (.504” – 18.5”)		—
550-225-10	0 – 24″ (.504” – 24.5”)		—
550-227-10	0 – 40″ (.504” – 40.2”)	±.003″	—

* ( ): Inside measurement
Note: Series 550 is not equipped with a depth bar.

DIMENSIONS

Range	D	J	S	R
0 – 200mm	60	40.5	8	5
0 – 300mm	75	50.5	12	5
0 – 450mm	100	65	18	10
0 – 600mm	100	65	18	10
0 – 1000mm	140	95	24	10

Jaw thickness:
3mm for 0 – 200mm model
3.8mm for 0 – 300mm model
6mm for 0 – 450mm and 0 – 600mm models
8mm for 0 – 1000mm model

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)
Resolution: 0.01mm or .0005″/0.01mm
Display:   LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 3 years under normal use (1 year: 300mm models)
(3.5 years: over 300mm models) Dust/Water protection level: IP67* (models up to 300mm)
*This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories
For details, refer to page D-39.
959143: Data hold unit
Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)*
05CZA625: SPC cable with data button (2m)*

959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)*
06ADV380C: SPC cable for USB-ITN-C(2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)*
02AZE140A: SPC cable for footswitch*
02AZD790C: SPC cable for U-WAVE with data button(160mm)
02AZE140C: SPC cable for footswitch
* For IP67 models (up to 300mm)

• High contrast analog display
• Locking screw above
• Lapped guideway
• Measuring blade for inside measurements
• Slide and beam made of hardened stainless steel
• Step measuring function
• Immediate measurements due to the Reference System
• Raised guideway for the protection of the scale
• Excellent resistance against dust, coolants and lubricants
• Dirt wipers are integrated in the slide
• Marcal Digital caliper can support USB
• Opto RS232C
• Digimatic
• IP 67
• battery
• instruction manual
• case
• Battery life approx. 3 years

Height of digits

• 8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103076	0 – 150	0 – 6″	0.01 / .0005″	0.03 mm	.001″	Factory standard	round

Functions of Marcal Digital Caliper

• ON/OFF
• AUTO-ON / OFF
• mm/inch
• LOCK function (key lock)
• RESET (set display to zero)
• DATA (data transmission via connection cable)

• High contrast analog display
• Locking screw above
• Lapped guideway
• Slide and beam made of hardened stainless steel
• Immediate measurements due to the Reference System
• Raised guideway for the protection of the scale
• Excellent resistance against dust, coolants and lubricants
• Dirt wipers are integrated in the slide
• Marcal digital caliper can support USB
• Opto RS232C
• Digimatic
• IP 67
• battery
• instruction manual
• case
• Battery life approx. 3 years

Height of digits

• 8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103078	20 – 170	0.8 – 6.7″	0.01 / .0005″	0.03 mm	.001″	Factory standard	none

Functions of Marcal Digital Caliper

• ON/OFF
• AUTO-ON / OFF
• mm/inch
• LOCK function (key lock)
• RESET (set display to zero)
• PRESET (for entering a numerical value)
• DATA (data transmission via connection cable)