Special Purpose Micrometer Archives - Page 6 of 11

High contrast analog display
Sliding spindle
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Chrome plated steel frame, heat insulated
With mounting shank for anvils dia. = 3,5mm
Digimatic
Opto RS232C
USB
Battery life approx. 2 years
IP 52
instruction manual
battery
case
anvils 40 Efk, 40 Efl
anvils 40 Eak, 40 Eal
anvils 40 Erk
anvils 40 Epk
anvils 40 Esk
anvils 40 Etk, 40 Etl
4151722 without measuring anvils
8.5mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151722	0 – 25	0 – 1″	0.001 / .00005″	4 µm	6.5 mm	0.635 mm	5 – 10
4151723	0 – 25	0 – 1″	0.001 / .00005″	4 µm	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)
LOCK function (key lock)

Measuring surfaces: spherical anvil, planar spindle
Operating and display units with satin chrome finish
Hard lacquered steel frame
Spindle and anvil made of hardened steel, carbide tipped
Heat insulators
Rapid drive with integrated ratchet
Locking device
instruction manual
setting standard (measuring range of 25-50 mm)
case

OLYMPUS DIGITAL CAMERA

Technical Data

Order no.	Measuring range mm	Graduation value mm	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4134250	0 – 25	0,01	4 µm	6.5 mm	0.5 mm	5 – 10
4134251	25 – 50	0,01	4 µm	6.5 mm	0.5 mm	5 – 10

Measuring surfaces: spherical anvil, planar spindle
High contrast analog display
Stainless spindle is hardened throughout and ground
Rapid drive
Lacquered steel frame, heat insulated
USB
Digimatic
Opto RS232C
Battery life approx. 2 years
IP 65
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case
8.5 mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151820	0 – 25	0 – 1″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151821	25 – 50	1 – 2″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to ORIGIN)
mm/inch
ORIGIN (for entering a numerical value)
LOCK function (key lock)
TOL (Tolerance and warning limits)
DATA (data transmission)
HOLD (storage of measured values)

MICROMAR 40 AS MICROMETER

With blade-type measuring surfaces
Operating and display units with satin chrome finish
Hard lacquered steel frame
Spindle and anvil made of hardened steel, carbide tipped
Heat insulators
Rapid drive with integrated ratchet
Locking device
Sliding spindle
instruction manual
setting standard (measuring range of 25-50 mm)
case

Technical Data

Order no.	Measuring range mm	Graduation value mm	Error limit µm	Spindle thread pitch_mm	Measuring force (N)
4134200	0 – 25	0,01	4 µm	0.5 mm	5 – 10
4134201	25 – 50	0,01	4 µm	0.5 mm	5 – 10
4134202	50 – 75	0,01	5 µm	0.5 mm	5 – 10
4134203	75 – 100	0,01	5 µm	0.5 mm	5 – 10

MICROMAR 40 AS MICROMETER

With blade-type measuring surfaces
Operating and display units with satin chrome finish
Hard lacquered steel frame
Spindle and anvil made of hardened steel, carbide tipped
Heat insulators
Rapid drive with integrated ratchet
Locking device
Sliding spindle
instruction manual
setting standard (from measuring range 1-2″)
case

Technical Data

Order no.	Measuring range inches	Graduation value inch	Error limit inches	Micrometer pitch (inches)	Measuring force (N)
4134930	0 – 1″	.0001”	.00016″	.025″	5 – 10
4134931	1 – 2″	.0001”	.00016″	.025″	5 – 10
4134932	2 – 3″	.0001”	.0002″	.025″	5 – 10
4134933	3 – 4″	.0001”	.0002″	.025″	5 – 10

With blade-type measuring surfaces
Sliding spindle
High contrast analog display
Stainless spindle is hardened throughout and ground
Rapid drive
Lacquered steel frame, heat insulated
USB
Digimatic
Opto RS232C
Battery life approx. 2 years
IP 54
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151810	0 – 25	0 – 1″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151811	25 – 50	1 – 2″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151812	50 – 75	2 – 3″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151813	75 – 100	3 – 4″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to ORIGIN)
mm/inch
ORIGIN (for entering a numerical value)
LOCK function (key lock)
TOL (Tolerance and warning limits)
DATA (data transmission)
HOLD (storage of measured values)

MICROMAR 40 AB MICROMETER

Reduced measuring surfaces Ø 3 mm
Operating and display units with satin chrome finish
Hard lacquered steel frame
Spindle and anvil made of hardened steel, carbide tipped
Heat insulators
Rapid drive with integrated ratchet
Locking device
instruction manual
setting standard (measuring range of 25-50 mm)
case

OLYMPUS DIGITAL CAMERA

Technical Data

Order no.	Measuring range mm	Graduation value mm	Error limit µm	Spindle thread pitch_mm	Measuring force (N)
4134100	0 – 25	0,01	4 µm	0.5 mm	5 – 10
4134101	25 – 50	0,01	4 µm	0.5 mm	5 – 10
4134102	50 – 75	0,01	5 µm	0.5 mm	5 – 10
4134103	75 – 100	0,01	5 µm	0.5 mm	5 – 10

MICROMAR 40 AB MICROMETER

Reduced measuring surfaces Ø 3 mm
Operating and display units with satin chrome finish
Hard lacquered steel frame
Spindle and anvil made of hardened steel, carbide tipped
Heat insulators
Rapid drive with integrated ratchet
Locking device
instruction manual
setting standard (from measuring range 1-2″)
case

OLYMPUS DIGITAL CAMERA

Technical Data

Order no.	Measuring range inches	Graduation value inch	Error limit inches	Micrometer pitch (inches)	Measuring force (N)
4134920	0 – 1″	.0001”	.00016″	.025″	5 – 10
4134921	1 – 2″	.0001”	.00016″	.025″	5 – 10
4134922	2 – 3″	.0001”	.0002″	.025″	5 – 10
4134923	3 – 4″	.0001”	.0002″	.025″	5 – 10

Measuring surfaces: spherical anvil, planar spindle
Operating and display units with satin chrome finish
Hard lacquered steel frame
Spindle and anvil made of hardened steel, carbide tipped
Heat insulators
Rapid drive with integrated ratchet
Locking device
instruction manual
setting standard (from measuring range 1-2″)
case

OLYMPUS DIGITAL CAMERA

Technical Data

Order no.	Measuring range inches	Graduation value inch	Error limit inches	Spindle diameter	Micrometer pitch (inches)	Measuring force (N)
4134940	0 – 1″	.0001”	.00016″	6.5 mm	.025″	5 – 10
4134941	1 – 2″	.0001”	.00016″	6.5 mm	.025″	5 – 10

Reduced measuring surfaces Ø 3 mm
High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
USB
Digimatic
Opto RS232C
Battery life approx. 2 years
IP 65
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case

Height of Digits

8.5mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151750	0 – 25	0 – 1″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151751	25 – 50	1 – 2″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151752	50 – 75	2 – 3″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10
4151753	75 – 100	3 – 4″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to ORIGIN)
mm/inch
ORIGIN (for entering a numerical value)
LOCK function (key lock)
TOL (Tolerance and warning limits)
DATA (data transmission)
HOLD (storage of measured values)

Measuring surfaces: Anvil with narrow web, pointed spindle
High contrast analog display
Stainless spindle is hardened throughout and ground
Rapid drive
Lacquered steel frame, heat insulated
USB
Digimatic
Opto RS232C
Battery life approx. 2 years
IP 65
battery
instruction manual
case

Height of Digits

8.5mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151830	0 – 25	0 – 1″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to ORIGIN)
mm/inch
ORIGIN (for entering a numerical value)
LOCK function (key lock)
TOL (Tolerance and warning limits)
DATA (data transmission)
HOLD (storage of measured values)