Thickness Gauges Archives - Page 2 of 6

Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes.
Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils.
Anvil retracting stroke: 2mm/.080”
Anvil positioning range: 25mm/ 1”
Adjustment nut: adjusts the measuring range.
Clamp: adjustment nut
Flatness of measuring face: 1μm
Stability of indication: 2μm or less (stability of indicators is not included)
The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage. Consult Mitutoyo if intending to use dial indicators which are not recommended.

Note: The dial indicator and protection cover are optional.

SPECIFICATIONS
Metric

Order No.	Range	Parallelism	Measuring force	Recommended dial indicator (optional)
201-101	0 – 25mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-102	25 – 50mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-103	50 – 75mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-104	75 – 100mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-105	100 – 125mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-106	125 – 150mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-107	150 – 175mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-108	175 – 200mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-109	200 – 225mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-110	225 – 250mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-111	250 – 275mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)
201-112	275 – 300mm	5µm	15N±3N	2046SB (0.01mm reading), 2109SB-10 (0.001mm reading)

Inch

Order No.	Range	Parallelism	Measuring force	Recommended dial indicator (optional)
201-151	0 – 1”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-152	1 – 2”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-153	2 – 3”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-154	3 – 4”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-155	4 – 5”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-156	5 – 6”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-157	6 – 7”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-158	7 – 8”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-159	8 – 9”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-160	9 – 10”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-161	10 – 11”	.0002”	15N±3N	2803SB-10 (.0001” reading)
201-162	11 – 12”	.0002”	15N±3N	2803SB-10 (.0001” reading)

*1: Measuring force is that force present before an indicator is installed and is determined at the point where the spindle is retracted 1mm from the rest position.

DIMENSIONS

Optional accessories
Dial indicator
Dial protection cover: No.21DZA000
Refer to page C-45 for details.
Recommended dial indicators
No.2046SB: Dial indicator (Graduation: 0.01mm)
No.2109SB-10: Dial indicator (Graduation: 0.001mm)

Dial caliper gages are inside diameter measurement tools, which have a broader range of applications including the measurement of hole diameter and internal measurement of special shapes (grooves).

Internal measurement

SPECIFICATIONS
Metric

Order No.	Range	Graduation	Range of opening*1	Dial face	Accuracy	Measuring force
209-125	6 – 18mm	0.01mm	5.8 – 18.2mm	0-100-100	±40µm	2.0N or less
209-126	10 – 22mm	0.01mm	9.8 – 22.2mm	0-100-100	±40µm	2.0N or less
209-127	20 – 32mm	0.01mm	19.8 – 32.2mm	0-100-100	±40µm	2.0N or less
209-155	5 – 15mm	0.01mm	4.8 – 15.2mm	0-100	±30µm	2.0N or less
209-156	10 – 20mm	0.01mm	9.8 – 20.2mm	0-100	±30µm	2.0N or less
209-175	10 – 30mm	0.01mm	9.8 – 30.2mm	0-100-100	±40µm	2.0N or less
209-176	20 – 40mm	0.01mm	19.8 – 40.2mm	0-100-100	±40µm	2.0N or less

*1: Datum point setting is required (Reference gage available as an optional accessory).
*2: Range of opening is a value for reference. Accuracy is not guaranteed if the Dial Caliper Gage is used beyond the measuring range.
* Please note that this Dial Caliper Gage is only provided with standard models. Special size and special specification models are not supported.

DIMENSIONS

Order No.	A	B
209-125	1.1	1.1
209-126	2.3	2.7
209-127	8.0	4.4

Order No.	A	B	L	T
209-155	2.2	2.2	26	1.2
209-156	5.5	5.5	28	1.5

Order No.	A	B	T
209-175	5.5	5.5	1.5
209-176	10	10	2.0

Dial thickness gages can quickly measure the thickness of thin products such as paper and felt.
Contact point and anvil are both made of ceramic: rust-free (547-401 is excluded.)
Integrated molding of the bezel and crystal ensures protection against water and oil penetration via the front face.

Standard Type

High Accuracy Type

Standard Type

Lightweight Type (integrated molding of the bezel)

Lens thickness measurement

Thickness of concave-convex lenses and surfaces can be measured.
Anvils and contact points are interchangeable to enable concave surfaces to be measured.
Provided with a ball point

Tube thickness measurement

Pipe wall thickness, thickness of curved boards can be measured.

Groove depth measurement

Suitable for measuring narrow grooves.
Measuring face of the contact point and anvil are blade-shaped (thickness: 1mm).

Usage examples

Measuring paper thickness

Measuring thickness of a human hair

DIMENSIONS

Unit: mm

Optional Accessories
905338: SPC cable (1m) for digital models
905409: SPC cable (2m) for digital models
02AZD790F: SPC cable for U-WAVE (160mm)
Digimatic Mini-Processor DP-1VR
Refer to page A-13 for details.

Input Tool
Convenient Interface Input Tools which enable the conversion of measurement data to keyboard signals and directly input them to cells in off-the-shelf spreadsheet software such as Excel.
(Refer to pages A-5 to A-6 for details.)

DIMENSIONS

Application examples

Note:Parallelism between the flat point and anvil
547-313: 10μm
7313: 5μm Concave lens Ball

DIMENSIONS

MARAMETER 49P-2M GAGE FOR EXTERNAL MEASUREMENT

Generous clearance on jaws reaches over non-measured part protrusions for easy access to areas where thickness must meet critical dimensional specs
Retraction lever is conveniently located for one hand operation
0.02 mm or 0.1 mm / .01“, .001“, or 1/64“ grads. available
Continuous reading dials with revolution counters normally provided
Cylindrical radius steel contact tips normally furnished

Technical data

Order no.	Product type	Measuring range mm	Throat depth mm	Graduation value mm	Measuring force (N)	Measuring depth mm	Mounting hole for indicator
2050704	49P-17M	0 – 50	100 mm	0.02 mm	–	100 mm	0.375 inch
2050709	49P-19M	0 – 50	200 mm	0.02 mm	–	200 mm	0.375 inch
2050710	49P-1M	0 – 75	100 mm	0.1 mm	–	100 mm	0.375 inch
2050718	49P-2M	0 – 75	200 mm	0.1 mm	–	200 mm	0.375 inch

MARAMETER 49P-2 GAGE FOR EXTERNAL MEASUREMENT

Generous clearance on jaws reaches over non-measured part protrusions for easy access to areas where thickness must meet critical dimensional specs
Retraction lever is conveniently located for one hand operation
0.02 mm or 0.1 mm / .01“, .001“, or 1/64“ grads. available
Continuous reading dials with revolution counters normally provided
Cylindrical radius steel contact tips normally furnished

Technical data

Order no.	Product type	Measuring range inches	Throat depth inch	Graduation value inch	Measuring force (N)	Mounting hole for indicator
2050696	49P-1	0 – 3″	4 inch	.01″	–	0.375 inch
2050702	49P-17	0 – 2″	4 inch	.001″	–	0.375 inch
2050706	49P-19	0 – 2″	8 inch	.001″	–	0.375 inch
2050711	49P-2	0 – 3″	8 inch	.01″	–	0.375 inch

High contrast analog and digital LCD
Tolerance displayed with 2 LEDs

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Repeatability mm	Error limit (mm)	Measuring force (N)	Measuring depth mm	Measuring contact ball diameter mm	Length of moving measuring contact	Length of fixed measuring contact
4495560	838 EA	0 – 10	0.005 mm	0.005 mm	0.015 mm	0.8 – 1.2	35 mm	1.5 mm	19.1 mm	18.6 mm
4495561	838 EA	0 – 20	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1.5 mm	24.6 mm	24.6 mm
4495562	838 EA	0 – 20	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1.5 mm	24.6 mm	2.5 mm
4495563	838 EA	0 – 30	0.02 mm	0.02 mm	0.04 mm	0.9 – 1.6	116 mm	3 mm	30 mm	30 mm
4495564	838 EA	0 – 50	0.02 mm	0.04 mm	0.06 mm	0.8 – 1.7	167 mm	3 mm	30 mm	30 mm
4495565	838 EA	0 – 30	0.02 mm	0.02 mm	0.04 mm	0.9 – 1.6	116 mm	3 mm	30 mm	4 mm
4495566	838 EA	0 – 50	0.02 mm	0.04 mm	0.06 mm	0.8 – 1.7	169 mm	3 mm	30 mm	4.3 mm

Functions

ON/OFF
mm/inch
TOL (enter tolerance limit values)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)

Contact points made of carbide
Absolute measuring instrument
Easy-to-read tolerance markers

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Repeatability mm	Error limit (mm)	Measuring force (N)	Measuring depth mm	Measuring contact ball diameter mm	Length of moving measuring contact	Groove depth	Groove width	Length of fixed measuring contact
4495580	838 TI	5 – 15	0.005 mm	0.005 mm	0.015 mm	0.8 – 1.2	35 mm	0.6 mm	2.5 mm	2.3 mm	0.8 mm	2.5 mm
4495581	838 TI	10 – 30	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	5.4 mm	5.2 mm	1.2 mm	5.4 mm
4495582	838 TI	20 – 40	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	7.3 mm	7 mm	1.2 mm	7.3 mm
4495583	838 TI	30 – 50	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	7.3 mm	7 mm	1.2 mm	7.3 mm
4495584	838 TI	40 – 60	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	12.2 mm	8.3 mm	1.2 mm	12.2 mm
4495585	838 TI	50 – 70	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	12.2 mm	8.3 mm	1.2 mm	12.2 mm
4495586	838 TI	15 – 65	0.05 mm	0.025 mm	0.05 mm	0.9 – 1.9	188 mm	1.5 mm	6 mm	5.5 mm	1.9 mm	6 mm
4495587	838 TI	40 – 90	0.05 mm	0.025 mm	0.05 mm	0.9 – 1.9	192 mm	2 mm	8.5 mm	8.3 mm	2.4 mm	8.5 mm

High contrast analog and digital LCD.
Tolerance displayed with 2 LEDs

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Repeatability mm	Error limit (mm)	Measuring force (N)	Measuring depth mm	Measuring contact ball diameter mm	Length of moving measuring contact	Groove depth	Groove width	Length of fixed measuring contact
4495590	838 EI	5 – 15	0.005 mm	0.005 mm	0.015 mm	0.8 – 1.2	35 mm	0.6 mm	2.5 mm	2.3 mm	0.8 mm	2.5 mm
4495591	838 EI	10 – 30	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	5.4 mm	5.2 mm	1.2 mm	5.4 mm
4495592	838 EI	20 – 40	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	7.3 mm	7 mm	1.2 mm	7.3 mm
4495593	838 EI	30 – 50	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	7.3 mm	7 mm	1.2 mm	7.3 mm
4495594	838 EI	40 – 60	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	12.2 mm	8.3 mm	1.2 mm	12.2 mm
4495595	838 EI	50 – 70	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	12.2 mm	8.3 mm	1.2 mm	12.2 mm
4495598	838 EI	13 – 43	0.02 mm	0.02 mm	0.04 mm	1.2 – 1.7	127 mm	1.3 mm	5.7 mm	5.7 mm	1.6 mm	5.7 mm
4495599	838 EI	30 – 60	0.02 mm	0.02 mm	0.04 mm	1.2 – 1.7	132 mm	1.5 mm	6.5 mm	6.2 mm	1.8 mm	6.5 mm
4495600	838 EI	50 – 80	0.02 mm	0.02 mm	0.04 mm	1.2 – 1.7	132 mm	2 mm	8.5 mm	8.3 mm	2.4 mm	8.5 mm

Functions

There are ON/OFF Switch
mm/inch
ABS (display can be set to zero without losing reference to preset)
TOL (enter tolerance limit values)

MARAMETER 57B-13M PORTABLE THICKNESS GAGES

Using the basic design of the Model 57B-13 (Model 57B-13M — Metric) gage, the lower contact is PT-103, 1.10 mm / .043” diameter rod, mounted horizontally
Upper contact is a flat chisel contact , in line with the rod
By slipping tubular parts onto the lower contact, the gage can measure the wall thickness of the tube
An auxiliary weight on the indicator provides a total dead weight load of 25 grams
Digital indicator includes integrated wireless transmitter

Technical data

Order no.	Product type	Measuring range mm	Throat depth mm	Graduation value mm	Measuring force
2050981	57B-13M	0 – 7.6	102 mm	0.01 mm	0.25 N

MARAMETER XLI-57B-13 PORTABLE THICKNESS GAGES

Using the basic design of the Model 57B-13 (Model 57B-13M — Metric) gage, the lower contact is PT-103, 1.10 mm / .043” diameter rod, mounted horizontally
Upper contact is a flat chisel contact , in line with the rod
By slipping tubular parts onto the lower contact, the gage can measure the wall thickness of the tube
An auxiliary weight on the indicator provides a total dead weight load of 25 grams
Digital indicator includes integrated wireless transmitter

Technical data

Order no.	Product type	Measuring range inches	Measuring range mm	Throat depth mm	Measuring force
2057550	XLI-57B-13	0 – .30″	0 – 7.62	102 mm	0.25 N

MARAMETER 57B-13 PORTABLE THICKNESS GAGES

Using the basic design of the Model 57B-13 (Model 57B-13M — Metric) gage, the lower contact is PT-103, 1.10 mm / .043” diameter rod, mounted horizontally
Upper contact is a flat chisel contact , in line with the rod
By slipping tubular parts onto the lower contact, the gage can measure the wall thickness of the tube
An auxiliary weight on the indicator provides a total dead weight load of 25 grams
Digital indicator includes integrated wireless transmitter

Technical data

Order no.	Product type	Measuring range inches	Throat depth mm	Graduation value inch	Measuring force
2050980	57B-13	0 – .30″	102 mm	.0005″	0.25 N