• Short handle digital torque wrench with clockwise and counter-clockwise operation
• Unit:N.m, in.lb, ft.lb, kg.cm
• Peak and track working mode
• Target torque value can be set , with audible and visible alarm:
  -Green LED light on and buzzer sounds when target torque value is
  90%~100% of target torque
  – Both Green and Red LED light on and buzzer sounds when target torque value is
  reached
• Power off automatically in 5 minutes without any operations
• Non-slip grip handle
• Short handle digital torque wrench With overload record
  (once the torque reaches 110% of the maximum range)

Check the PDF

TORQUE WRENCHES

Torque Master Torque Wrenches are used in various operations where proper torquing of nuts, bolts and other fasteners is critical.

Torque Master Torque Wrenches are of four types.

1. Standard Model: These Torque Wrenches are available to cover a torque range from 2Lb Ft. to 2000 Lb Ft./ 0.3 Kg.Mts. to 275 Kg.Mts. and 3 NM to 2700NM in 12 different Models with Square Drive 3/8″ to 1″.
   
2. Production Torque Wrenches: These Torque Industrial Wrenches are pre-set with one particular torque for repetitive production applications. the advantages of this type torque wrench is to prevent the tampering of torque setting during assembly and to save considerable time.
   
3. : This Torque Industrial Wrench has a built in ratchet mechanism for working in confined area. These torque wrenches are also available to cover a torque range from 2lb Ft. to 2000 Lb Ft./ 0.3 Kg.Mts. to 275 Kg.Mts. and 3 NM to 2700NM in 12 different Models with Square Drive 3/8″ to 1″.
   
4. Open Jaw Fixed Type Torque Wrenches: This is a type of torque wrench fitted with an open jaw adaptor and set a pre-determined torque. Places where vertical clearance is restricted to permit the use of an industrial sockets and a torque wrench, this torque wrench is suitable for torquing nuts. These are available to cover across flat sizes from 10mm to 46mm with torque preset to one value as per requirement.
   All Torque Master Torque Wrenches are calibrated on mechanical torque tester to an accuracy of +/_ 3% as laid down in IS 7145-1973; The torque tester is calibrated by Force proving instrument and force proving instrument is certified by n p l new delhi
   

Specification of Standard Click Type Torque Wrench

• Digital torque tester with external sensor, to test torque wrenches, torque screwdrivers and other torque tools
• Digital torque tester with clockwise and counter-clockwise operation
• Peak, track and first peak working modes
• Unit: cN.m, in.lb, kg.cm
• Low and high limits with judgement
• Target torque value can be set (10 target torque values can be saved and selected quickly), with audible and visible alarm: green LED light on and buzzer sounds when the value is 80%~100% of target torque both green and red LED light on and buzzer sounds when the target torque value is reached
• Memory of 2000 measurement values for browsing and output
• Automatic power off

Check the PDF