Vernier Calipers Archives - Page 3 of 11

Inside and outside measurements can be read directly from the upper and lower vernier scales.
The jaws have radiused measuring faces for accurate inside diameter (ID) measurement.
With fine adjustment (except for 160-130/131/132/133/134).

SPECIFICATIONS

Metric with inside measurement vernier scale

Order No.	Range*	Accuracy	Graduations	Remarks
160-130	0 (20.1) – 450mm	±0.10mm	0.05mm	without fine adjustment
160-131	0 (20.1) – 600mm	±0.10mm
160-132	0 (20.1) – 1000mm	±0.15mm
160-133	0 (20.1) – 1500mm	±0.22mm
160-134	0 (20.1) – 2000mm	±0.28mm

* ( ): Minimum dimension in ID measurement

Metric with inside measurement vernier scale

Order No.	Range*	Accuracy	Graduations	Remarks
160-127	0 (10.1) – 300mm	±0.04mm	0.02mm	with fine adjustment
160-128	0 (20.1) – 450mm	±0.05mm
160-101	0 (20.1) – 600mm	±0.05mm
160-104	0 (20.1) – 1000mm	±0.07mm
160-110	0 (20.1) – 1500mm	±0.1mm
160-113	0 (20.1) – 2000mm	±0.12mm

* ( ): Minimum dimension in ID measurement

Metric/Inch with metric/inch double scale

Order No.	Range*	Accuracy	Graduations	Remarks
160-150	0 (10.1) – 300mm	±0.04mm	0.02mm/.001”	+10mm/.394” to reading in inside measurement
160-151	0 (20.1) – 450mm	±0.05mm		+20mm/.787” to reading in inside measurement
160-153	0 (20.1) – 600mm	±0.05mm
160-155	0 (20.1) – 1000mm	±0.07mm
160-157	0 (20.1) – 1500mm	±0.1mm
160-159	0 (20.1) – 2000mm	±0.12mm

* ( ): Minimum dimension in ID measurement

Inch with inside measurement vernier scale

Order No.	Range*	Accuracy	Graduations	Remarks
160-124	0 (.304”) – 12″	±.0015″	.001”	—
160-116	0 (.504”) – 18″	±.002″
160-102	0 (.504”) – 24″	±.002″
160-105	0 (1.004”) – 40″	±.003″
160-111	0 (1.004”) – 60″	±.004″
160-114	0 (1.004”) – 80″	±.005″

* ( ): Minimum dimension in ID measurement
Inch/Metric with inch/metric double scale

Order No.	Range*	Accuracy	Graduations	Remarks
160-125	0 (.304”) – 12″	±.0015″	.001”/0.02mm	+.3”/7.62mm to reading in inside measurement
160-119	0 (.504”) – 18″	±.002″		+.5”/12.7mm to reading in inside measurement
160-103	0 (.504”) – 24″	±.002″		+.5”/12.7mm to reading in inside measurement
160-106	0 (1.004”) – 40″	±.003″		+1”/25.4mm to reading in inside measurement
160-112	0 (1.004”) – 60″	±.004″
160-115	0 (1.004”) – 80″	±.005″

* ( ): Minimum dimension in ID measurement

DIMENSIONS

Range	D	E	F	H	L	M	R	S	t
0-300mm/0-12″	75	103	38	20	445	10	R 5	12	3.8
0-450mm*	100	89	—	25	630	14.8	R10	18	6
0-450mm/0-18″	100	112	51	25	630	14.8	R10	18	6
0-600mm*	100	89	—	25	780	14.8	R10	18	6
0-600mm/0-24″	100	112	51	25	780	14.8	R10	18	6
0-1000mm*	140	111	—	32	1240	17	R10	24	8
0-1000mm/0-40″	140	150	62.5	32	1240	17	R10	24	8
0-1500mm*	180	129	—	32	1800	19	R10	30	8
0-1500mm/0-60″	180	170	62.5	32	1800	19	R10	30	8
0-2000mm*	180	129	—	40	2300	23	R10	30	12
0-2000mm/0-80″	180	180	78	40	2300	23	R10	30	12

*: without fine adjustment

IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.)
The range of applications can be expanded by using interchangeable jaws (optional).
Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.
Provided with preset function for setting a desired starting point, which allows direct readout of offset measurement.

SPECIFICATIONS

Metric

Order No.	Range	Accuracy
552-181-10	0 – 450mm	±0.04mm
552-182-10	0 – 600mm	±0.04mm
552-183-10	0 – 1000mm	±0.05mm
552-184-10	0 – 1500mm	±0.09mm
552-185-10	0 – 2000mm	±0.12mm

Inch/Metric

Order No.	Range	Accuracy
552-191-10	0 – 18″	±.002″
552-192-10	0 – 24″
552-193-10	0 – 40″
552-194-10	0 – 60″	±.004″
552-195-10	0 – 80″	±.005″

Optional accessories
Interchangeable jaws

SPECIFICATIONS
Standard Type

Order No.	Components	a	b
07CZA056	Right (07CAA044), Left (07CAA045)	28mm (1.1″)	30mm (1.2″)

* 1 set

Inside Point Type

Order No.	Components	a	b
07CZA058	07CZA041 x 2pcs.	25mm	50mm
07CZA059	07CZA048 x 2pcs.	1″	2″

Scriber Type

Order No.	Components	a	b
07CZA055	Right (07CZA042), Left (07CZA043)	8mm	30mm
07CZA061	Right (07CZA042), Left (07CZA049)	031″	1.2″

Surface Plate Type

Order No.	a	b
07CZA044	90mm (3.5″)	28mm (1.1″)

Centerline Type

Order No.	Components	a	b
07CZA057	07CZA039 x 2pcs.	30mm	30mm
07CZA060	07CZA047 x 2pcs.	1.2″	1.2″

Note: Entering the appropriate offset value enables the display to indicate the correct measurement value inscribed on the jaws, which should be installed so that this inscription is visible from the display side of the caliper.
Scriber for height gages
Order No. 07GZA000

Type	Applicable calipers	Range	Accuracy whenattached to the caliper
Standard type	552-181-10 (552-191-10)	0 – 450mm ( 0-18”)	±0.06mm ( ±.0025”)
	552-182-10 (552-192-10)	0 – 600mm ( 0-24”)	±0.06mm ( ±.0025”)
	552-183-10 (552-193-10)	0 – 1000mm ( 0-40”)	±0.07mm ( ±.0030”)
	552-184-10 (552-194-10)	0 – 1500mm ( 0-60”)	±0.11mm( ±.0045”)
	552-185-10 (552-195-10)	0 – 2000mm ( 0-80”)	±0.14mm ( ±.0055”)
Inside point type	552-181-10 (552-191-10)	Inside: 50.1-500mm ( 2.004-20”)	±0.09mm( ±.0035”)
	552-181-10 (552-191-10)	Outside: 0 – 450mm ( 0-18”)
	552-182-10 (552-192-10)	Inside: 50.1-650mm ( 2.004-26”)
	552-182-10 (552-192-10)	Outside: 0 – 600mm( 0-24”)
	552-183-10 (552-193-10)	Inside: 50.1-1050mm ( 2.004-42”)	±0.10mm ( ±.0040”)
	552-183-10 (552-193-10)	Outside: 0 – 1000mm ( 0-40”)	±0.10mm ( ±.0040”)
	552-184-10 (552-194-10)	Inside: 50.1-1550mm ( 2.004-62”)	±0.14mm ( ±.0055”)
	552-184-10 (552-194-10)	Outside: 0 – 1500mm ( 0-60”)	±0.14mm ( ±.0055”)
	552-185-10 (552-195-10)	Inside: 50.1-2050mm( 2.004-82”)	±0.17mm ( ±.0070”)
	552-185-10 (552-195-10)	Outside: 0 – 2000mm( 0-80”)	±0.17mm ( ±.0070”)
Centerline type	552-181-10 (552-191-10)	30.1 – 480mm ( 1.204-19.2”)	±0.08mm ( ±.0030”)
	552-182-10 (552-192-10)	30.1 – 630mm ( 1.204-25.2”)	±0.08mm ( ±.0030”)
	552-183-10 (552-193-10)	30.1 – 1030mmm ( 1.204-41.2”)	±0.09mm ( ±.0035”)
	552-184-10 (552-194-10)	30.1 – 1530mm ( 1.204-61.2”)	±0.13mm( ±.0055”)
	552-185-10 (552-195-10)	30.1 – 2030mm ( 1.204-81.2”)	±0.16mm ( ±.0065”)
Scriber type	552-181-10 (552-191-10)	30 – 480mm ( 1.2-19.2”)	±0.10mm ( ±.0040”)
	552-182-10 (552-192-10)	30 – 630mm ( 1.2-25.2”)	±0.10mm ( ±.0040”)
	552-183-10 (552-193-10)	30 – 1030mm ( 1.2-41.2”)	±0.11mm ( ±.0045”)
	552-184-10 (552-194-10)	30 – 1530mm ( 1.2-61.2”)	±0.15mm ( ±.0060”)
	552-185-10 (552-195-10)	30 – 2030mm ( 1.2-81.2”)	±0.18mm ( ±.0070”)
Surface plate	552-181-10 (552-191-10)	0 – 450mm ( 0-17.7”)	±0.10mm( ±.0040”)
Surface plate	552-182-10 (552-192-10)	0 – 600mm ( 0-23.7”)
type	552-182-10 (552-192-10)	0 – 600mm ( 0-23.7”)
type	552-183-10 (552-193-10)	0 – 1000mm ( 0-39.4”)	±0.11mm ( ±.0045”)
+
Scriber type for
Scriber type for	552-184-10 (552-194-10)	0 – 1500mm ( 0-59.4”)	±0.15mm ( ±.0060”)
height gages	552-184-10 (552-194-10)	0 – 1500mm ( 0-59.4”)	±0.15mm ( ±.0060”)
height gages	552-185-10 (552-195-10)	0 – 2000mm ( 0-79.6”)	±0.18mm ( ±.0070”)
	552-181-10 (552-191-10)	Inside: 25.1 – 475mm ( 1.004-19″)
	552-181-10 (552-191-10)	Outside: 0 – 450mm ( 1-18”)	±0.12mm ( ±.0050”)
	552-182-10 (552-192-10)	Inside: 25.1 – 625mm ( 1.004-25″)	±0.12mm ( ±.0050”)
Surface plate	552-182-10 (552-192-10)	Outside: 0 – 600mm ( 1-24”)
Surface plate	552-183-10 (552-193-10)	Inside: 25.1 – 1025mm ( 1.004-41″)	±0.13mm ( ±.0055”)
type		Inside: 25.1 – 1025mm ( 1.004-41″)
+		Outside: 0 – 1000mm ( 1-40”)
Inside point type		Outside: 0 – 1000mm ( 1-40”)
Inside point type	552-184-10 (552-194-10)	Inside: 25.1 – 1525mm ( 1.004-62″)	±0.17mm ( ±.0070”)
	552-184-10 (552-194-10)	Outside: 0 – 1500mm ( 1-60”)	±0.17mm ( ±.0070”)
	552-185-10 (552-195-10)	Inside: 25.1 – 2025mm ( 1.004-81″)	±0.20mm ( ±.0080”)
	552-185-10 (552-195-10)	Outside: 0 – 2000mm ( 1-80”)	±0.20mm ( ±.0080”)
	552-181-10 (552-191-10)	15 – 465mm ( 0.6-18.6”)	±0.11mm ( ±.0045”)
Surface plate	552-182-10 (552-192-10)	15 – 615mm ( 0.6-24.6”)
type	552-182-10 (552-192-10)	15 – 615mm ( 0.6-24.6”)
type	552-183-10 (552-193-10)	15 – 1015mm ( 0.6-40.6”)	±0.12mm ( ±.0050”)
+	552-183-10 (552-193-10)	15 – 1015mm ( 0.6-40.6”)	±0.12mm ( ±.0050”)
+	552-184-10 (552-194-10)	15 – 1515mm ( 0.6-60.6”)	±0.16mm ( ±.0065”)
Centerline type	552-184-10 (552-194-10)	15 – 1515mm ( 0.6-60.6”)	±0.16mm ( ±.0065”)
	552-185-10 (552-195-10)	15 – 2015mm ( 0.6-80.6”)	±0.19mm ( ±.0075”)

Application examples

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life: Approx. 5,000 hours in continuous use
Dust/Water protection level: IP66 (IEC 60529)* Standard accessory: Jaw clamps (2 pcs.), 05GZA033
* Although these models are IP66 rated, care should be taken to dry tool after use.

Functions
Zero-setting
Data hold
Offsetting
Presetting
Data output
Low-power and low-voltage alert
Counting value composition error
Automatic power on/off, inch/mm reading (inch/mm models)

Standard accessories (2 pcs)

Jaw clamps: No.05GZA033

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button(160mm)
02AZE140A: SPC cable for footswitch

IP66 Absolute Digital Caliper (Refer to page D-8 for a description of Absolute measurement.)
Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws.
Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy
552-150-10	0 – 450mm (20.1 – 470mm)	±0.06mm
552-151-10	0 – 600mm (20.1 – 620mm)	±0.06mm
552-152-10	0 – 1000mm (20.1 – 1020mm)	±0.07mm
552-153-10	0 – 1500mm (20.1 – 1520mm)	±0.11mm
552-154-10	0 – 2000mm (20.1 – 2020mm)	±0.14mm

* ( ): Dimension in inside measurement

Inch/Metric

Order No.	Range*	Accuracy
552-160-10	0 – 18″ (.504 – 18.5″)	±.0025”
552-161-10	0 – 24″ (.504 – 24.5″)	±.0025”
552-162-10	0 – 40″ (1.004 – 40.5″)	±.003”
552-163-10	0 – 60″ (1.004 – 60.5″)	±.0045”
552-164-10	0 – 80″ (1.004 – 80.5″)	±.0055”

* ( ): Dimension in inside measurement

DIMENSIONS

Range	E	F	H	K	L	N	P	U
0 – 450mm (0-18″)	91.8	65.5	25	173	680	89	8	10 (.25″)
0 – 600mm (0-24″)	91.8	65.5	25	173	830	89	8	10 (.25″)
0 – 1000mm (0-40″)	113.8	73	32	170.5	1280	110	12	10 (.5″)
0 – 1500mm (0-60″)					1790
0 – 2000mm (0-80″)					2300

( ): Inch/Metric type

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm
Material of jaws: Stainless Steel Hardened
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 5,000 hours in continuous use
Dust/Water protection level: IP66 (IEC 60529)*
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
*This model is not waterproof type. Please wipe away the wet after use.

Functions Zero-setting Data hold Offsetting Presetting Data output
Low-power and low-voltage alert Counting value composition error Automatic power on/off, inch/mm reading (inch/mm models)

Optional accessories
For details, refer to page D-39.
Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

IP66 Absolute Digital Caliper (Refer to page D-8 for Absolute function.)
Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws.
Allows integration into statistical process control and measurement systems for models with measurement data output connector.Refer to page A-3.

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy
552-302-10	0 – 450mm (20.1 – 470mm)	±0.04mm
552-303-10	0 – 600mm (20.1 – 620mm)	±0.04mm
552-304-10	0 – 1000mm (20.1 – 1020mm)	±0.05mm
552-305-10	0 – 1500mm (20.1 – 1520mm)	±0.09mm
552-306-10	0 – 2000mm (20.1 – 2020mm)	±0.12mm

* ( ): Dimension in inside measurement

Inch/Metric

Order No.	Range*	Accuracy
552-312-10	0 – 18″ (.504 – 18.5″)	±.002″
552-313-10	0 – 24″ (.504 – 24.5″)	±.002″
552-314-10	0 – 40″ (1.004 – 40.5″)	±.002″
552-315-10	0 – 60″ (1.004 – 60.5″)	±.004″
552-316-10	0 – 80″ (1.004 – 80.5″)	±.005″

* ( ): Dimension in inside measurement

DIMENSIONS

Range	D	E	G	H	J	L	N	R	S	t	U
0-450mm	100	91.8	35	25	65	640	41.2	R10	18	8	10
(0-18”)											(.25”)
0-600mm	100	91.8	35	25	65	790	41.2	R10	18	8	10
(0-24”)											(.25”)
0-1000mm	150	113,8	45	32	100	1230	62.8	R10	24	8	10
(0-40”)											(.5”)
0-1500mm	150	113.8	45	32	100	1740	62.8	R10	24	8	10
(0-60”)											(.5”)
0-2000mm	150	113.8	45	32	100	2250	62.8	R10	24	8	10
(0-80”)											(.5”)

Optional accessories

Metric

	No. 552-302-10, 552-155-10, 552-303- 10 and 552-156-10.	No. 552-304-10 and 552-305-10
Clamp box (1 pair)	No.914053	No.914054
Distance measurement jaw (1 pair)	No.914055
Point ID measuring attachment	No.914057

Inch/Metric

	No. 552-312-10, 552-165-10, 552-313-10 and 552-166-10	No. 552-314-10, 552-315-10, 552-316-10
Clamp box (1 pair)	No.914053	No.914054
Distance measurement jaw (1 pair)	No.914056
Point ID measuring attachment	No.914058

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm Material of jaws: Stainless Steel Hardened Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory) Battery life: Approx. 5,000 hours in continuous use Dust/Water protection level: IP66 (IEC60529)* Standard accessory: Jaw clamps (2 pcs.), 05GZA033

* This model is not waterproof type. Please wipe away the wet after use.

Functions
Zero-setting
Data hold
Offsetting
Presetting
Data output
Low-power and low-voltage alert Counting value composition error Automatic power on/off, inch/mm reading (inch/mm models)

Optional accessories
For details, refer to page D-39. Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)
05CZA625: SPC cable with data button (2m)

Newly designed dial movement for ultra smooth sliding and high shock protection.
Easy-to-read yellow dial.
Large finger-rest aids ease-of-use.
Jaw tips are relieved for easy measurement of thin parts.
Allows step measurement.

SPECIFICATIONS

Metric

Order No.	Range	Accuracy	Graduation	Remarks
505-730	0 – 150mm	±0.03mm	0.02mm, 2mm/rev
505-734				Carbide-tipped jaws for outside measurement
505-735				Carbide-tipped jaws for outside and inside measurement
505-732*		±0.02mm	0.01mm, 1mm/rev	—
505-731	0 – 200mm	±0.03mm	0.02mm, 2mm/rev
505-733*	0 – 200mm	±0.03mm	0.01mm, 1mm/rev
505-745	0 – 300mm	±0.04mm	0.02mm, 2mm/rev

* Silver cover type

Inch

Order No.	Range	Accuracy	Graduation	Remarks
505-740J / 505-742J*	0 – 6″	±.001″	.001″, .1″/rev
505-736*		±.001″		Carbide-tipped jaws for outside measurement
505-738*		±.001″		Carbide-tipped jaws for outside and inside measurement
505-744		±.001″	.001″, .2″/rev	Carbide-tipped jaws for outside measurement
505-741J / 505-743J*	0 – 8″	±.002″	.001″, .1″/rev	—
505-737*		±.002″		Carbide-tipped jaws for outside measurement
505-739*		±.002″		Carbide-tipped jaws for outside and inside measurement
505-749	0 – 12″	±.002″	.001″, .2″/rev	—
505-746*		±.002″	.001″, .1″/rev	—
505-750		±.002″	.001″, .2″/rev	Carbide-tipped jaws for outside measurement
505-747*		±.002″	.001″, .1″/rev	Carbide-tipped jaws for outside and inside measurement
505-748*		±.002″	.001″, .1″/rev	Carbide-tipped jaws for outside and inside measurement

* Silver cover type

DIMENSIONS

Range	A	B	D	E	H	L
0 – 150mm	16.5	21	40	57.2	16	231
0 – 200mm	20	24.5	50	57.2	16	288
0 – 300mm	22	27.5	64	70.2	20	404

Offers a resolution of 0.01mm with corresponding accuracy.
Incorporates an Absolute measurement system. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)
Allows integration into statistical process control and measurement systems for models with measurement data output connector.Refer to page A-3.
ID measurement value: displayed value + (the minimum inside measurement value mentioned below). OFFSET switch allows to input a compensation value so that the measurement value can be read directly (Code No. 551-301-10, 551-331-10, 551-311-10 and 551-341-10). Preset function allows to set a desired starting point (Code No. 551331-10 and 551-341-10).
Tips of the outside measurement jaw are relieved for easy measurement of thin parts.

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy	Remarks
551-301-10	0 – 200mm (10.1 – 210mm)	±0.03mm	IP67
551-331-10	0 – 300mm (10.1 – 310mm)	±0.04mm	IP67, with offset/preset function for easy inside measurement
551-204-10	0 – 500mm (20.1 – 520mm)	±0.06mm	—
551-206-10	0 – 750mm (20.1 – 770mm)	±0.06mm
551-207-10	0 – 1000mm (20.1 – 1020mm)	±0.07mm

* ( ): inside measurement
Note: Series 551 is not equipped with a depth bar.

Inch/Metric

Order No.	Range*	Accuracy	Remarks
551-311-10	0 – 8″ (.404” – 8.4”)	±.0015″	IP67
551-341-10	0 – 12″ (.404” – 12.4”)	±.002″	IP67, with offset/preset function for easy inside measurement
551-224-10	0 – 20″ (.504” – 20.5”)	±.0025″	—
551-226-10	0 – 30″ (.504” – 30.5”)	±.0025″
551-227-10	0 – 40″ (1.004” – 41”)	±.003″

* ( ): inside measurement
Note: Series 551 is not equipped with a depth bar.

DIMENSIONS

Range	A	D	J	S
0 – 200mm	30	60	43	8
0 – 300mm	40.1	90	68	10
0 – 500mm	56	150	115	15
0 – 750mm	56	150	115	15
0 – 1000mm	56	150	115	20

Jaw thickness:
3mm for 0 – 200mm model
3.8mm for 0 – 300mm model
6mm for 0 – 500mm and 0 – 750mm models
8mm for 0 – 1000mm model

Technical Data
Accuracy: Refer to the list of specifications.
(excluding quantizing error for digital models) Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed:Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 3 years under normal use (1 year: 300mm models) (3.5 years: over 300mm models)
Dust/Water protection level: IP67* (models up to 300mm)
*This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories For details, refer to page D-39.
959143: Data hold unit Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)*
05CZA625: SPC cable with data button (2m)*

959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)*
06ADV380C: SPC cable for USB-ITN-C(2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)*
02AZE140A: SPC cable for footswitch* 02AZD790C: SPC cable for U-WAVE with data button (160mm)
02AZE140C: SPC cable for footswitch
For IP67 models (up to 300mm)

Offers a resolution of 0.01mm with corresponding accuracy.
Incorporates an Absolute measurement system. No need to reset the origin after switching (Refer to page D-8 for a description of Absolute measurement.)
Code 550-301-10, 550-331-10, 550-311-10 and 550-341-10: IP67 (These models are not a waterproof type. Therefore a rustproofing shall be applied after use.)
Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.
ID measurement value: displayed value + (the minimum inside measurement value mentioned below). OFFSET switch allows to input a compensation value so that the measurement value can be read directly (Code Nos. 550-301-10, 550-331-10, 550-311-10 and 550-341-10). Preset function allows to set a desired starting point (Code Nos. 550- 331-10 and 550-341-10).

SPECIFICATIONS

Metric

Order No.	Range*	Accuracy	Remarks
550-301-10	0 – 200mm (10.1 – 210mm)	±0.03mm	IP67
550-331-10	0 – 300mm (10.1 – 310mm)	±0.04mm	IP67, with offset/preset function for easy inside measurement
550-203-10	0 – 450mm (20.1 – 470mm)	±0.05mm	—
550-205-10	0 – 600mm (20.1 – 620mm)	±0.05mm	—
550-207-10	0 – 1000mm (20.1 – 1020mm)	±0.07mm	—

* ( ): Inside measurement
Note: Series 550 is not equipped with a depth bar.

Inch/Metric

Order No.	Range*	Accuracy	Remarks
550-311-10	0 – 8″ (.404” – 8.4”)	±.0015″	IP67
550-341-10	0 – 12″ (.404” – 12.4”)	±.002″	IP67, with offset/preset function for easy inside measurement
550-223-10	0 – 18″ (.504” – 18.5”)		—
550-225-10	0 – 24″ (.504” – 24.5”)		—
550-227-10	0 – 40″ (.504” – 40.2”)	±.003″	—

* ( ): Inside measurement
Note: Series 550 is not equipped with a depth bar.

DIMENSIONS

Range	D	J	S	R
0 – 200mm	60	40.5	8	5
0 – 300mm	75	50.5	12	5
0 – 450mm	100	65	18	10
0 – 600mm	100	65	18	10
0 – 1000mm	140	95	24	10

Jaw thickness:
3mm for 0 – 200mm model
3.8mm for 0 – 300mm model
6mm for 0 – 450mm and 0 – 600mm models
8mm for 0 – 1000mm model

Technical Data
Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)
Resolution: 0.01mm or .0005″/0.01mm
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 3 years under normal use (1 year: 300mm models)
(3.5 years: over 300mm models) Dust/Water protection level: IP67* (models up to 300mm)
*This model is not waterproof type.
Therefore, rustproofing shall be applied after use.

Optional accessories
For details, refer to page D-39.
959143: Data hold unit
Connecting cables for IT/DP/MUX
05CZA624: SPC cable with data button (1m)*
05CZA625: SPC cable with data button (2m)*

959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380A: SPC cable for USB-ITN-A (2m)*
06ADV380C: SPC cable for USB-ITN-C(2m)
Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)*
02AZE140A: SPC cable for footswitch*
02AZD790C: SPC cable for U-WAVE with data button(160mm)
02AZE140C: SPC cable for footswitch
* For IP67 models (up to 300mm)

Fine-adjustment aids slider positioning.
Allows step measurement.

SPECIFICATIONS

Metric

Order No.	Range	Depth bar	Remarks
532-101	0 – 130mm	Blade	with fine adjustment
532-102	0 – 180mm
532-103	0 – 280mm

Metric/Inch with metric/inch double scale

Order No.	Range	Depth bar	Inch graduation	Remarks
532-119	0 – 130mm	Blade	.001″	with fine adjustment
532-120	0 – 180mm
532-121	0 – 280mm

DIMENSIONS

Range	A	B	D	E	F	H	L
0 – 130mm/0 – 5”	17	21.5	40	53.5	31.2	16	229
0 – 180mm/0 – 7”	20.5	25	50	53.5	31.2	16	288
0 – 280mm/0 – 11”	22	27.5	64	66.5	38	20	404

Jaw thickness:
3.5mm for 0 – 130mm/0 – 5” and 0 – 180mm/0 – 7” models
3.8mm for 0 – 280mm/0 – 11” model

Technical Data
Accuracy: ±0.03mm (≤180mm), ±0.04mm (≤280mm)
Graduation: 0.02mm, 0.02mm (.001”) or .001” (1/128”)

Vernier Caliper – 531 Series — with thumb clamp

The slider moves only when the spring-loaded thumb grip is depressed.
Allows step measurement.

SPECIFICATIONS

Metric

Order No.	Range	Depth bar	Remarks
532-101	0 – 130mm	Blade	—
532-102	0 – 180mm
532-103	0 – 280mm

Metric/Inch with metric/inch double scale

Order No.	Range	Accuracy	Depth bar	Inch graduation	Remarks
531-122	0 – 150mm	±0.05mm	Blade	1/128″	with inch/mm conversion label
531-128*	0 – 150mm	±0.03mm		.001”	High accuracy model
531-108	0 – 200mm	±0.05mm		1/128″	—
531-129*	0 – 200mm	±0.03mm		.001”	High accuracy model
531-109	0 – 300mm	±0.08mm		1/128″	—
531-112*	0 – 300mm	±0.04mm		.001”	High accuracy model

* Graduation: 0.02mm

DIMENSIONS

Range	A	B	D	H	L
0 – 150mm/0 – 6”	17	21.5	40	16	229
0 – 200mm/0 – 8”	20.5	25	50	16	288
0 – 300mm/0 – 12”	22	27.5	64	20	404

Jaw thickness:
3.5mm for 0 – 150mm/0 – 6” and 0 – 200mm/0 – 8” models
3.8mm for 0 – 300mm/0 – 12” model

Technical Data
Accuracy: Refer to the list of specifications.
Graduation: 0.05mm, 0.05mm (1/128”) or .001” (1/128”) High accuracy type:
0.02mm or 0.02mm (.001”)

Plain and basic design.
Stepped graduation face prevents dust ingress between the main scale and slider.
The small vernier face angle (14°) provides easy reading.
Can measure outside and inside dimensions, depth, and steps.
Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
Decimal and fractional graduated scales (metric/inch and inch models only).

DIMENSIONS

Range	Outside jaw thickness
0 – 100mm	3
0 – 150mm 0 – 200mm	3
0 – 300mm	3.8
0 – 600mm	6
0 – 1000mm	8

Range	A	B	D	E	F	H	L
0 – 100mm	17	21.5	40	53.5	30	16	182
0 – 150mm	17	21.5	40	53.5	30	16	229
0 – 200mm	20.5	25	50	53.5	30	16	288
0 – 300mm	22	27.5	64	66.5	36	20	404
0 – 600mm	38	47	90	89	50	25	780
0 – 1000mm	50	60	130	111	61	32	1240

* Code No.530-100 and No.530-102 incorporate a round depth bar (ø1.9mm).
The depth bar shown in the illustration above is a different type.

SPECIFICATIONS

Metric

Order No.	Range	Depth bar	Remarks
530-100	0 – 100mm	ø1.9mm rod	—
530-102	0 – 150mm	ø1.9mm rod	—
530-101		Blade	—
530-320			Carbide-tipped jaws for outside measurement
530-335			Carbide-tipped jaws for outside and inside measurement
530-122*			High accuracy model: ±0.03mm
530-108	0 – 200mm		—
530-321			Carbide-tipped jaws for outside measurement
530-123*			High accuracy model: ±0.03mm
530-109	0 – 300mm		—
530-322			Carbide-tipped jaws for outside measurement
530-124*			High accuracy model: ±0.04mm
530-501	0 – 600mm	—	—
530-502	0 – 1000mm	—	—

* Graduation: 0.02mm

Metric/Inch with metric/inch double scale

Order No.	Range	Depth bar	Inch graduation	Remarks
530-104	0 – 150mm	Blade	1/128″	—
530-316			1/128″	Clamping screw below the slider
530-312*			.001″	High accuracy model: ±0.03mm
530-114	0 – 200mm		1/128″	—
530-118*	0 – 200mm		.001″	High accuracy model: ±0.03mm
530-115	0 – 300mm		1/128″	—
530-119*	0 – 300mm		.001″	High accuracy model: ±0.04mm

* Graduation: 0.02mm

Inch with inch/inch double scale

Order No.	Range	Depth bar	Inch graduation	Remarks
530-105	0 – 6″	Blade	1/128″	—
530-116	0 – 8″	Blade	1/128″	—

Measurement Applications

1. Outside measurement

2. Inside measurement

3. Step measurement

4. Depth measurement

Technical Data
Accuracy:
±0.05mm (≤200mm), ±0.08mm (≤300mm)
±0.10mm (≤600mm), ±0.15mm (≤1000mm)
High accuracy type:
±0.03mm (≤200mm), ±0.04mm (≤300mm)
Graduation:
0.05mm, 0.05mm (1/128”) or .001” (1/128”)
High accuracy type:
0.02mm or 0.02mm (.001”)

Mitutoyo’s Absolute Solar Digimatic Caliper retains its origin point indefinitely.
At 60 Lux and above the ABSOLUTE solar caliper is ready to start measurement. No more repeated zero setting caused by a shortage of light.
An ABSOLUTE scale is incorporated so that zero setting is not required at each power ON. No danger of overspeed errors.
Slider operation is smooth and comfortable.
Allows step measurement.
Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

SPECIFICATIONS

Metric

Order No.	Range	Depth bar	Fine adjustment
500-443	0 – 100mm	ø1.9mm rod	with thumb roller
500-453*	0 – 100mm	ø1.9mm rod
500-444	0 – 150mm	Blade
500-454*	0 – 150mm
500-445	0 – 200mm
500-455*	0 – 200mm

* without SPC data output
Inch/Metric

Order No.	Range	Depth bar	Fine adjustment
500-463	0 – 4″	.075″ rod	with thumb roller
500-473*	0 – 4″	.075″ rod
500-464	0 – 6″	Blade
500-474*	0 – 6″
500-465	0 – 8″
500-475*	0 – 8″

* without SPC data output
DIMENSIONS

Range	A	B	C	D	H	L
0-100mm	16.5	21	14.5	40	16	182
0-150mm	16.5	21	14.5	40		233
0-200mm	20	24.5	18	50		290

Jaw thickness: 3.5mm

Optional accessories
Dedicated for the models equipped with a digimatic output function. For details, refer to page D-39.
959143: Data hold unit

Connecting cables for IT/DP/MUX*
959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)

USB Input Tool Direct
06ADV380C: SPC cable for USB-ITN-C (2m)
Connecting cables for U-WAVE-T
02AZD790C: SPC cable for U-WAVE with data button (160mm)
02AZE140C: SPC cable for footswitch

Technical Data
Accuracy: ±0.02mm (excluding quantizing error)
Resolution: 0.01mm or .0005″/0.01mm
Repeatability: 0.01mm
Display: LCD
Scale type: ABSOLUTE electrostatic capacity linear encoder
Power supply: Solar cell*
Max. response speed: Unlimited
Operational temperature: 0 to 40° C
* Can be used continuously above 60lux ambient illumination

Functions
Absolute measurement
Scale contamination detection
Data output (use together with optional connecting cable)
Data hold (use optional hold unit. This cannot be used with the data output function)
* For details of the function, refer to page D-8.