AUTHOR RATE
Baker Dial Bore Gauge – Split Ball

L C : 0.01mm Accuracy As per BGIPL standard Split Ball type Design Supplied with 4 interchangeable Measuring heads. (4‐4.6 ,4.5‐5.1,5‐5.6,5.5‐6.1mm ) TYPE READING RANGE K439 0.01 mm 4‐6 mm  

AUTHOR RATE
Baker Dial Bore Gauge 2 Point

L C : 0.01mm Accuracy As per BGIPL standard. 2 point type Design Supplied with 9 interchangeable anvils (extension)  in step of 0.5 mm from 6‐10 mm TYPE READING RANGE K539 0.01 mm 6‐10 mm  

AUTHOR RATE
Universal Gauge Sets

Universal Gauge (extension compatible version) standard features: Range 30-250mm internal / 0-215mm external 15mm anvil travel Constant measuring pressure Digital or mechanical readout 150mm and 500mm extensions available. Can be screwed together in multiples (up to maximum 3m recommended) Measuring table and supports available for conversion to bench gauge for the measurement of small components […]

AUTHOR RATE
Special Bore Measurement – Miscellaneous

Irregular Spacing Available between 16-300mm diameter to measure between odd spaced lobes. Gun Barrel Head Measurement of smooth bore and rifled bore gun barrels. Major and minor diameters measured deep in to bores. Right Angled Adaptor Blind Bore Standard between 2-6mm and 12.5-300mm. Between 6-12.5mm on request. Slot Width (Large)Slot widths from 6-100mm.   Slot […]

AUTHOR RATE
Special Bore Measurement – Deep Hole Pneumatic

Operated by a pneumatic actuator powered by a 3 bar compressed air supply – either from a compressor or a workshop air-line. The measurement data is collected by a capacities probe fitted just behind, and in constant contact with the measuring head. This direct contact ensures high-quality transducer-type accuracy, even at great depths. Measurements are […]

AUTHOR RATE
Special Bore Measurement – Spherical

2 Point Spherical Measurement of ovality in bore. Measurement of bores with irregularities. 3 Point Spherical Gives good repeatability even when out of line with bore centre. Available from 6-300mm diameter on digital systems.   Spherical Radius Can be supplied as a 2 point (for ovality) or 3 point contact. Available from 6-300mm.  

AUTHOR RATE
Special Bore Measurement – External Spline

Frames fitted with 1 x ball and 1 x pin.

AUTHOR RATE
Special Bore Measurement – Internal Spline

2 and 3 point heads available. Anvils manufactured from tool steel.  Between pin, major and minor diameter heads available.  Diameters from 8-300mm diameter (5/16″-12″).  

AUTHOR RATE
Three Point Special application Bore Gauges

For sizes from 2-300mm diameter. Interchangeable with standard heads Suits Bowers XTD, XTH and Ultima Special forms, radius, ball contacts Depth stops available for quick location Annular grooves possible Grooves For Size from 2-300 diameter    

AUTHOR RATE
Special Bore Measurement – Screw Threads

To measure effective (functional) diameter, pitch diameter, major diameter, between M4 – 300mm. / No. 8 UN – 12″ diameter. Ball Screw Threads External Threads  

AUTHOR RATE
XT500 Large Diameter Three Point Bore Gauge

The Bowers XT500 large diameter 3-point bore-gauge has been designed specifically for the measurement of internal diameters between 300 and 500mm. The newly designed constant-force digital readout ensures that the measuring pressure remains constant throughout the measurement whilst radiussed measuring anvils provide optimum centralisation in the part. Anvil sets are supplied in 25mm steps (300-325, […]

AUTHOR RATE
MicroGauge Two Point Bore Gauge

The new MicroGauge Two point bore gauge system has been designed specifically for the measurement of small bores between 1.0-10.0mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen […]

AUTHOR RATE
Baker XT3 Three Point Pistol Grip Digital Bore Gauge

Bowers’ XT3 Three Point Pistol Grip Digital Bore Gauge Holematic offers a new ergonomic design – including a larger and clearer LCD display – along with IP67 electronics protection, proximity output with built-in Bluetooth; allowing bi-directional communication giving greater flexibility for data acquisition and storage. The extended mechanical travel of the XT range means that […]

AUTHOR RATE
XT3 Three Point Digital Bore Gauge

Bowers’ Bluetooth digital internal micrometers offer a new ergonomic design – including a larger and clearer LCD display – along with IP67 electronics protection, proximity output; allowing bi-directional communication giving greater flexibility for data acquisition and storage. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate […]

AUTHOR RATE
XT Analogue Three Point Mechanical Bore Gauge

Bowers XT Analogue three Point Mechanical Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. […]

Gokul Traders Copyright © 2010-19 Developed by Shades Of Web. All rights reserved.