CLAMPING STUD
Toughened C 45 to 22 to 28 HRC. Rolled threads. Finish – Blackodized. Used in jig-fixtures, hydraulic equipments as one of the clamping element.
HEX NUT – DIN 6330-1965
C45 heat treated to 22 to 28 HRC.
Finish – Blackodized. Used in jig-fixtures, hydraulic equipment.
EXTENSION NUT
C45 heat treated to 22 to 28 HRC. To couple the stud for the perpose of increasing the length.
PLAIN WASHER DIN 6340 – 1987
Toughhened C 45 to 22 to 28 HRC.
Finish – Blackodized. Widely used in most of the clamping system.
SPHERICAL WASHER And CONICAL SEAT AS PER IS 4297 – 1967
Steel heat treated 40 to 45 HRC. Blackodized.
STRAP CLAMP AS PER IS 4292 – 1984
Steel heat treated 40 to 45 HRC. Blackodized finished. Used on machine for clamping work pieces.
CLAMPING STUD
Toughened C 45 to 22 to 28 HRC. Rolled threads. Finish – Blackodized. Used in jig-fixtures, hydraulic equipments as one of the clamping element.
FLAT CLAMP
Positive clamping of Flat jobs, irrespective of the size. Low height and side clamping, leaving the entire top surface free for machining. Springs are provided for quick release of clamping force and jaw. Due to low height it is suitable for clamping work piece with small contact area. Supplied with screw and T nuts of respective sizes.
FLANGE NUT
Toughhened C 45 to 22 to 28 HRC. Finish – Blackodized. Widely used in most of the clamping system. Process to be economical in comparison to pairs of hex nut and washer.
OPEN ENDED STRAP CLAMP
Steel heat treated 40 to 45 HRC. Blackodized finished. Widely used for repetitive clamping applications frequent insertion and removal of part being clamped.
C WASHER AS PER IS DIN 6372 – 1972
Steel heat treated. Blackodized finished. In the construction of fixtures having special application as spacer or clamping element because it could be swung out of the way and the part can be inserted or removed quickly .
T NUT AS PER IS DIN 2015 – 1977
C45 heat treated to 22 to 28 HRC. Blackodized / Zinc Plated finish. Useful for the machines having ‘T’ slots, jig-fixures. Hydraulic elements, assorted setting elements and adopters. As illustrated.
RIGID CLAMP
SPRING PLUNGERS – TYPE ALLEN
Used in jig and fixture, machine tools, building, welding fixtures,Plastic moulding machine, these are required for wiper motor and Limit switches.
SPRING PLUNGERS – TYPE SLOTTED
SELF ALIGNING PAD – MALE THREAD – C TYPE
Useful for clamping the job from top to bottom. The ball swivels and provides contact with no damage to surface.
SELF ALIGNING PAD – MALE THREAD – F TYPE
SELF ALIGNING PAD – FEMALE THREAD – C TYPE
SELF ALIGNING PAD – FEMALE THREAD – F TYPE
ADJUSTABLE SELF ALIGNING PAD
ADJUSTABLE HEIGHT PLATE
Extra height could be achieved by stacking the blocks. Economical and save time in getting required spacers every time compact safe and reliable system. Used with or without exact height setter.
CLAMPING KIT
STEP BLOCK
Used to obtain required supporting heights. Any combination keeps the accurate parallelism.